From 4d65fe14a5244a9d0fccb09ccbb617ec21429a84 Mon Sep 17 00:00:00 2001 From: florian Date: Tue, 17 Jul 2012 16:39:47 +0000 Subject: au1000: fix InternetBox idsel and remove broken flag The following patch is necessary for the InternetBox (Surfbox) board-specific idsel to work with newer kernels. Acutally I don't exactly understand why this was not necessary before, but without the udelay, the MiniPCI adapter in slot 3 is not detected and set up correctly. Also remove platform broken flag, it works. Signed-off-by: Bruno Randolf git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32766 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch (limited to 'target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch') diff --git a/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch b/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch new file mode 100644 index 000000000..6b3603220 --- /dev/null +++ b/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch @@ -0,0 +1,12 @@ +--- a/arch/mips/alchemy/board-mtx1.c 2012-06-11 22:02:34.686604093 +0100 ++++ b/arch/mips/alchemy/board-mtx1.c 2012-06-11 22:04:23.375143044 +0100 +@@ -228,6 +228,9 @@ + * adapter on the mtx-1 "singleboard" variant. It triggers a custom + * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. + */ ++ ++ udelay(1); ++ + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ -- cgit v1.2.3