From 17c7b6c3fdc48301e50d22cc6138ede16bd1be24 Mon Sep 17 00:00:00 2001 From: nbd Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/au1000-2.6/Makefile | 34 --- .../au1000-2.6/base-files/default/etc/diag.sh | 25 -- target/linux/au1000-2.6/config/default | 252 ------------------ .../au1000-2.6/files/drivers/leds/leds-mtx1.c | 101 ------- target/linux/au1000-2.6/image/Makefile | 66 ----- .../linux/au1000-2.6/patches/001-au1x00_gpio.patch | 294 --------------------- .../patches/005-au1000_eth_link_beat.patch | 24 -- .../patches/006-mtx1_system_button.patch | 241 ----------------- .../linux/au1000-2.6/patches/011-mtx1_leds.patch | 28 -- .../au1000-2.6/patches/012-mtx1_cmdline.patch | 19 -- .../au1000-2.6/patches/013-openwrt_rootfs.patch | 11 - .../au1000-2.6/patches/014-au1000_eth_ioctl.patch | 15 -- .../au1000-2.6/patches/015-pci-resource.patch | 14 - .../linux/au1000-2.6/patches/016-pci-io_map.patch | 10 - .../linux/au1000-2.6/patches/017-usb-power.patch | 11 - target/linux/au1000-2.6/profiles/Atheros.mk | 13 - target/linux/au1000-2.6/profiles/Broadcom.mk | 13 - target/linux/au1000-2.6/profiles/Intel.mk | 13 - 18 files changed, 1184 deletions(-) delete mode 100644 target/linux/au1000-2.6/Makefile delete mode 100644 target/linux/au1000-2.6/base-files/default/etc/diag.sh delete mode 100644 target/linux/au1000-2.6/config/default delete mode 100644 target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c delete mode 100644 target/linux/au1000-2.6/image/Makefile delete mode 100644 target/linux/au1000-2.6/patches/001-au1x00_gpio.patch delete mode 100644 target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch delete mode 100644 target/linux/au1000-2.6/patches/006-mtx1_system_button.patch delete mode 100644 target/linux/au1000-2.6/patches/011-mtx1_leds.patch delete mode 100644 target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch delete mode 100644 target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch delete mode 100644 target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch delete mode 100644 target/linux/au1000-2.6/patches/015-pci-resource.patch delete mode 100644 target/linux/au1000-2.6/patches/016-pci-io_map.patch delete mode 100644 target/linux/au1000-2.6/patches/017-usb-power.patch delete mode 100644 target/linux/au1000-2.6/profiles/Atheros.mk delete mode 100644 target/linux/au1000-2.6/profiles/Broadcom.mk delete mode 100644 target/linux/au1000-2.6/profiles/Intel.mk (limited to 'target/linux/au1000-2.6') diff --git a/target/linux/au1000-2.6/Makefile b/target/linux/au1000-2.6/Makefile deleted file mode 100644 index d7b9f739a..000000000 --- a/target/linux/au1000-2.6/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mipsel -BOARD:=au1000 -BOARDNAME:=AMD Alchemy AU1x00 -FEATURES:=jffs2 usb pci - -LINUX_VERSION:=2.6.22.4 - -define Target/Description - Build firmware for AMD Alchemy 1500 boards - (e.g. 4G-Systems Mesh/Access Cube ...) -endef - -include $(INCLUDE_DIR)/kernel-build.mk -DEFAULT_PACKAGES += yamonenv - -define Kernel/BuildImage - $(call Kernel/BuildImage/Default) - $(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec $(LINUX_DIR)/zImage.flash.srec - $(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.srec $(LINUX_DIR)/zImage.srec -endef - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) - diff --git a/target/linux/au1000-2.6/base-files/default/etc/diag.sh b/target/linux/au1000-2.6/base-files/default/etc/diag.sh deleted file mode 100644 index d97461532..000000000 --- a/target/linux/au1000-2.6/base-files/default/etc/diag.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -d "/sys/class/leds/mtx1:$led" ] && echo "$state" > "/sys/class/leds/mtx1:$led/brightness" -} - -set_state() { - case "$1" in - preinit) - set_led green 0 - set_led red 1 - ;; - failsafe) - set_led green 1 - set_led red 1 - ;; - done) - set_led green 1 - set_led red 0 - ;; - esac -} diff --git a/target/linux/au1000-2.6/config/default b/target/linux/au1000-2.6/config/default deleted file mode 100644 index e19792809..000000000 --- a/target/linux/au1000-2.6/config/default +++ /dev/null @@ -1,252 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ATM is not set -# CONFIG_B44 is not set -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -# CONFIG_BROADCOM_PHY is not set -CONFIG_CHR_DEV_SG=m -CONFIG_CMDLINE="root=/dev/mtdblock0 rootfstype=squashfs,jffs2 init=/etc/preinit" -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=m -CONFIG_CRC16=y -# CONFIG_DDB5477 is not set -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DUMMY=m -CONFIG_ELF_CORE=y -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_FIXED_PHY is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -# CONFIG_GEN_RTC is not set -# CONFIG_HAMRADIO is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -# CONFIG_HZ_1024 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_48 is not set -CONFIG_I2C=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_AU1X00GPIO=m -CONFIG_I2C_CHARDEV=m -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_LEDS_MTX1=y -# CONFIG_LEDS_TRIGGERS is not set -CONFIG_MACH_ALCHEMY=y -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_MIRAGE is not set -CONFIG_MIPS_MTX1=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MIPS_XXS1500 is not set -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_ALCHEMY is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_MTX1=y -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_MTX1_WATCHDOG=y -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NETDEV_1000 is not set -CONFIG_NF_CONNTRACK=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CT_ACCT=y -# CONFIG_NF_NAT_AMANDA is not set -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_NEEDED=y -# CONFIG_NF_NAT_PPTP is not set -CONFIG_NF_NAT_SIP=m -# CONFIG_NF_NAT_TFTP is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PPP_MPPE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_QSEMI_PHY is not set -CONFIG_RESOURCES_64BIT=y -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_SERIAL_8250_AU1X00=y -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_PCI=m -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SMC91X is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SND_AU1X00 is not set -CONFIG_SOC_AU1500=y -CONFIG_SOC_AU1X00=y -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_STANDALONE is not set -CONFIG_STRIP=m -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TMD_HERMES is not set -# CONFIG_TC35815 is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_UHCI_HCD=m -# CONFIG_VIA_RHINE is not set -CONFIG_WDT_MTX1=y -CONFIG_ZONE_DMA=y -CONFIG_ZONE_DMA_FLAG=1 diff --git a/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c b/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c deleted file mode 100644 index 4c2ab55fc..000000000 --- a/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * LED driver for MTX-1 boards - * - * Copyright 2007 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include - -static struct platform_device *pdev; - -static void mtx1_led_set(struct led_classdev *led_cdev, enum led_brightness brightness) -{ - if (!strcmp("mtx1:green", led_cdev->name)) - gpio_set_value(211, brightness ? 1 : 0); - else - gpio_set_value(212, brightness ? 1 : 0); -} - -static struct led_classdev mtx1_green_led = { - .name = "mtx1:green", - .brightness_set = mtx1_led_set, -}; - -static struct led_classdev mtx1_red_led = { - .name = "mtx1:red", - .brightness_set = mtx1_led_set, -}; - -static int mtx1_leds_probe(struct platform_device *pdev) -{ - int ret; - - ret = led_classdev_register(&pdev->dev, &mtx1_green_led); - if (ret < 0) - goto out; - - ret = led_classdev_register(&pdev->dev, &mtx1_red_led); - if (ret < 0) - led_classdev_unregister(&mtx1_green_led); - -out: - return ret; -} - -static int mtx1_leds_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&mtx1_green_led); - led_classdev_unregister(&mtx1_red_led); - return 0; -} - -static struct platform_driver mtx1_leds_driver = { - .probe = mtx1_leds_probe, - .remove = mtx1_leds_remove, - .driver = { - .name = "mtx1-leds", - } -}; - -static int __init mtx1_leds_init(void) -{ - int ret; - - ret = platform_driver_register(&mtx1_leds_driver); - if (ret < 0) - goto out; - - pdev = platform_device_register_simple("mtx1-leds", -1, NULL, 0); - if (IS_ERR(pdev)) { - ret = PTR_ERR(pdev); - platform_driver_unregister(&mtx1_leds_driver); - goto out; - } - -out: - return ret; - -} - -static void __exit mtx1_leds_exit(void) -{ - platform_device_unregister(pdev); - platform_driver_unregister(&mtx1_leds_driver); -} - -module_init(mtx1_leds_init); -module_exit(mtx1_leds_exit); - -MODULE_AUTHOR("Florian Fainelli "); -MODULE_DESCRIPTION("MTX-1 LED driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000-2.6/image/Makefile b/target/linux/au1000-2.6/image/Makefile deleted file mode 100644 index 1d4aa4707..000000000 --- a/target/linux/au1000-2.6/image/Makefile +++ /dev/null @@ -1,66 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -LOADADDR = 0x81000000 # RAM start + 16M -KERNEL_ENTRY = 0x80100000 -RAMSIZE = 0x00100000 # 1MB - -FLASH_KERNEL := 0xBFD00000 -FLASH_FS := 0xBE000000 - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSIZE=$(RAMSIZE) - -define Build/Clean - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options -OBJCOPY_SREC := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS)) -OBJCOPY_BIN := $(TARGET_CROSS)objcopy -S -O binary $(addprefix --remove-section=,$(DROP_SECTIONS)) - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - - # Build RAM image - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \ - $(LOADER_MAKEOPTS) \ - clean compile - $(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/kernel.ram.srec - - # Build Flash image - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \ - $(LOADER_MAKEOPTS) \ - IMAGE_COPY=1 \ - LOADER_ENTRY=$(FLASH_KERNEL) \ - LOADER_TYPE=_flash \ - clean compile - $(OBJCOPY_SREC) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.srec - $(OBJCOPY_BIN) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.bin -endef - -define Image/Build/Initramfs - $(OBJCOPY_SREC) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.srec -endef - -define Image/Build - $(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec - grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img - grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img - $(CP) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.bin - $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs -ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - $(call Image/Build/Initramfs) -endif -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch b/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch deleted file mode 100644 index d4339aec4..000000000 --- a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch +++ /dev/null @@ -1,294 +0,0 @@ -diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c ---- linux-2.6.21.1/arch/mips/au1000/common/gpio.c 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c 2007-05-22 21:41:55.000000000 +0200 -@@ -1,4 +1,7 @@ - /* -+ * Copyright (C) 2007, OpenWrt.org, Florian Fainelli -+ * Architecture specific GPIO support -+ * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your -@@ -18,101 +21,133 @@ - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Notes : -+ * au1000 SoC have only one GPIO line : GPIO1 -+ * others have a second one : GPIO2 - */ -+ -+#include -+#include -+#include - #include --#include --#include -+ -+#include -+#include -+ -+#include -+#include - - #define gpio1 sys - #if !defined(CONFIG_SOC_AU1000) - static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; -+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 - --#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 -- --int au1xxx_gpio2_read(int signal) -+static int au1xxx_gpio2_read(unsigned gpio) - { -- signal -= 200; --/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ -- return ((gpio2->pinstate >> signal) & 0x01); -+ gpio -= AU1XXX_GPIO_BASE; -+ return ((gpio2->pinstate >> gpio) & 0x01); - } - --void au1xxx_gpio2_write(int signal, int value) -+static void au1xxx_gpio2_write(unsigned gpio, int value) - { -- signal -= 200; -+ gpio -= AU1XXX_GPIO_BASE; - -- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | -- (value << signal); -+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | -+ (value << gpio); - } - --void au1xxx_gpio2_tristate(int signal) -+static int au1xxx_gpio2_direction_input(unsigned gpio) - { -- signal -= 200; -- gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ -+ gpio -= AU1XXX_GPIO_BASE; -+ gpio2->dir &= ~(0x01 << gpio); -+ return 0; - } --#endif - --int au1xxx_gpio1_read(int signal) -+static int au1xxx_gpio2_direction_output(unsigned gpio, int value) -+{ -+ gpio -= AU1XXX_GPIO_BASE; -+ gpio2->dir = (0x01 << gpio) | (value << gpio); -+ return 0; -+} -+ -+#endif /* !defined(CONFIG_SOC_AU1000) */ -+ -+static int au1xxx_gpio1_read(unsigned gpio) - { --/* gpio1->trioutclr |= (0x01 << signal); */ -- return ((gpio1->pinstaterd >> signal) & 0x01); -+ return ((gpio1->pinstaterd >> gpio) & 0x01); - } - --void au1xxx_gpio1_write(int signal, int value) -+static void au1xxx_gpio1_write(unsigned gpio, int value) - { - if(value) -- gpio1->outputset = (0x01 << signal); -+ gpio1->outputset = (0x01 << gpio); - else -- gpio1->outputclr = (0x01 << signal); /* Output a Zero */ -+ /* Output a zero */ -+ gpio1->outputclr = (0x01 << gpio); - } - --void au1xxx_gpio1_tristate(int signal) -+static int au1xxx_gpio1_direction_input(unsigned gpio) - { -- gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ -+ gpio1->pininputen = (0x01 << gpio); -+ return 0; - } - -+static int au1xxx_gpio1_direction_output(unsigned gpio, int value) -+{ -+ gpio1->trioutclr = (0x01 & gpio); -+ return 0; -+} - --int au1xxx_gpio_read(int signal) -+int au1xxx_gpio_get_value(unsigned gpio) - { -- if(signal >= 200) -+ if(gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - return 0; - #else -- return au1xxx_gpio2_read(signal); -+ return au1xxx_gpio2_read(gpio); - #endif - else -- return au1xxx_gpio1_read(signal); -+ return au1xxx_gpio1_read(gpio); - } - --void au1xxx_gpio_write(int signal, int value) -+void au1xxx_gpio_set_value(unsigned gpio, int value) - { -- if(signal >= 200) -+ if(gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - ; - #else -- au1xxx_gpio2_write(signal, value); -+ au1xxx_gpio2_write(gpio, value); - #endif - else -- au1xxx_gpio1_write(signal, value); -+ au1xxx_gpio1_write(gpio, value); - } - --void au1xxx_gpio_tristate(int signal) -+int au1xxx_gpio_direction_input(unsigned gpio) - { -- if(signal >= 200) -+ if (gpio >= AU1XXX_GPIO_BASE) - #if defined(CONFIG_SOC_AU1000) - ; - #else -- au1xxx_gpio2_tristate(signal); -+ return au1xxx_gpio2_direction_input(gpio); - #endif - else -- au1xxx_gpio1_tristate(signal); -+ return au1xxx_gpio1_direction_input(gpio); - } - --void au1xxx_gpio1_set_inputs(void) -+int au1xxx_gpio_direction_output(unsigned gpio, int value) - { -- gpio1->pininputen = 0; -+ if (gpio >= AU1XXX_GPIO_BASE) -+#if defined(CONFIG_SOC_AU1000) -+ ; -+#else -+ return au1xxx_gpio2_direction_output(gpio, value); -+#endif -+ else -+ return au1xxx_gpio1_direction_output(gpio, value); - } - --EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); --EXPORT_SYMBOL(au1xxx_gpio_tristate); --EXPORT_SYMBOL(au1xxx_gpio_write); --EXPORT_SYMBOL(au1xxx_gpio_read); -+EXPORT_SYMBOL(au1xxx_gpio_direction_output); -+EXPORT_SYMBOL(au1xxx_gpio_direction_input); -+EXPORT_SYMBOL(au1xxx_gpio_get_value); -+EXPORT_SYMBOL(au1xxx_gpio_set_value); ---- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/arch/mips/Kconfig 2007-05-21 08:04:42.000000000 +0200 -@@ -1044,6 +1044,7 @@ - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB -+ select GENERIC_GPIO - - config PNX8550 - bool -diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h ---- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 1970-01-01 01:00:00.000000000 +0100 -@@ -1,20 +0,0 @@ --#ifndef __AU1XXX_GPIO_H --#define __AU1XXX_GPIO_H -- --void au1xxx_gpio1_set_inputs(void); --void au1xxx_gpio_tristate(int signal); --void au1xxx_gpio_write(int signal, int value); --int au1xxx_gpio_read(int signal); -- --typedef volatile struct --{ -- u32 dir; -- u32 reserved; -- u32 output; -- u32 pinstate; -- u32 inten; -- u32 enable; -- --} AU1X00_GPIO2; -- --#endif //__AU1XXX_GPIO_H -diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h ---- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h 2007-05-21 01:10:22.000000000 +0200 -@@ -0,0 +1,69 @@ -+#ifndef _AU1XXX_GPIO_H_ -+#define _AU1XXX_GPIO_H_ -+ -+#define AU1XXX_GPIO_BASE 200 -+ -+typedef volatile struct -+{ -+ u32 dir; -+ u32 reserved; -+ u32 output; -+ u32 pinstate; -+ u32 inten; -+ u32 enable; -+ -+} AU1X00_GPIO2; -+ -+extern int au1xxx_gpio_get_value(unsigned gpio); -+extern void au1xxx_gpio_set_value(unsigned gpio, int value); -+extern int au1xxx_gpio_direction_input(unsigned gpio); -+extern int au1xxx_gpio_direction_output(unsigned gpio, int value); -+ -+ -+/* Wrappers for the arch-neutral GPIO API */ -+ -+static inline int gpio_request(unsigned gpio, const char *label) -+{ -+ /* Not yet implemented */ -+ return 0; -+} -+ -+static inline void gpio_free(unsigned gpio) -+{ -+ /* Not yet implemented */ -+} -+ -+static inline int gpio_direction_input(unsigned gpio) -+{ -+ return au1xxx_gpio_direction_input(gpio); -+} -+ -+static inline int gpio_direction_output(unsigned gpio, int value) -+{ -+ return au1xxx_gpio_direction_output(gpio, value); -+} -+ -+static inline int gpio_get_value(unsigned gpio) -+{ -+ return au1xxx_gpio_get_value(gpio); -+} -+ -+static inline void gpio_set_value(unsigned gpio, int value) -+{ -+ au1xxx_gpio_set_value(gpio, value); -+} -+ -+static inline int gpio_to_irq(unsigned gpio) -+{ -+ return gpio; -+} -+ -+static inline int irq_to_gpio(unsigned irq) -+{ -+ return irq; -+} -+ -+/* For cansleep */ -+#include -+ -+#endif /* _AU1XXX_GPIO_H_ */ diff --git a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch deleted file mode 100644 index 946bd8454..000000000 --- a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch +++ /dev/null @@ -1,24 +0,0 @@ -diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c ---- linux-2.6.16.7/drivers/net/au1000_eth.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/net/au1000_eth.c 2006-04-23 01:42:48.000000000 +0200 -@@ -12,6 +12,9 @@ - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * -+ * Bjoern Riemer 2004 -+ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de -+ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it -@@ -1672,6 +1675,10 @@ - aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); - control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; - #ifndef CONFIG_CPU_LITTLE_ENDIAN -+ /*riemer: fix for startup without cable */ -+ if (!link) -+ dev->flags &= ~IFF_RUNNING; -+ - control |= MAC_BIG_ENDIAN; - #endif - if (link && (dev->if_port == IF_PORT_100BASEFX)) { diff --git a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch deleted file mode 100644 index f4d380c72..000000000 --- a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch +++ /dev/null @@ -1,241 +0,0 @@ -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 11:54:31.000000000 +0200 -@@ -64,6 +64,7 @@ - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -+ { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 }, - }; - - int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile 2006-04-23 14:01:36.000000000 +0200 -@@ -8,3 +8,4 @@ - # - - lib-y := init.o board_setup.o irqmap.o -+obj-y := mtx-1_sysbtn.o -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 2006-04-23 14:01:17.000000000 +0200 -@@ -0,0 +1,218 @@ -+/* -+ * Driver for the MTX-1 System Button. -+ * -+ * (c) Copyright 2005 4G Systems , All Rights Reserved. -+ * http://www.4g-systems.biz -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide -+ * warranty for any of this software. This material is provided -+ * "AS-IS" and at no charge. -+ * -+ * (c) Copyright 2005 4G Systems -+ * -+ * Release 0.01. -+ * -+ * Author: Michael Stickel michael.stickel@4g-systems.biz -+ * -+ * -+ * After the module is loaded there is a device /dev/misc/btn -+ * that can be read. It returns one char '1' if the button -+ * has been pressed an '0' if it has been released. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+ -+#ifndef FALSE -+# define FALSE (0) -+#endif -+ -+#ifndef TRUE -+# define TRUE (!FALSE) -+#endif -+ -+ -+//---------[ declarations ]----------------- -+ -+ -+static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue); -+static char state_changed; -+static char last_value; -+static char is_inuse; -+ -+ -+//---------[ Hardware Functions ]----------------- -+ -+// The MTX-1 Button is attached to GPIO207. -+#define MTX1_GPIO2_SYSBTN (7) -+#define MTX1_SYSBTN_IRQ (AU1500_GPIO_207) -+ -+ -+static char mtx1_getbtn (int btnno) -+{ -+ if (btnno==0) { -+ return (au_readl(GPIO2_PINSTATE) & (1<i_rdev)!=mtx1sysbtn_minor) return -ENODEV; -+ if (is_inuse) return -EBUSY; -+ is_inuse=1; -+ last_value = mtx1_getbtn(0); -+ state_changed = 0; -+ return 0; -+} -+ -+ -+static int mtx1sysbtn_release (struct inode *inode, struct file *file) { -+ if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) { -+ is_inuse=0; -+ } -+ return 0; -+} -+ -+ -+static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ if (count < 1) -+ return -EINVAL; -+ if (!state_changed) -+ interruptible_sleep_on (&mtx1btn_wait_queue); -+ state_changed = 0; -+ char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */ -+ if(copy_to_user(buf, &c, 1)) -+ return -EFAULT; -+ return 1; -+} -+ -+ -+static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait) -+{ -+ unsigned int mask = 0; -+ -+ poll_wait (file, &mtx1btn_wait_queue, wait); -+ -+ if (state_changed) // state changed since last time. -+ mask |= POLLIN | POLLRDNORM; -+ -+ return mask; -+} -+ -+ -+static struct file_operations mtx1sysbtn_fops = { -+ .owner = THIS_MODULE, -+ .read = mtx1sysbtn_read, -+ .poll = mtx1sysbtn_poll, -+ .open = mtx1sysbtn_open, -+ .release = mtx1sysbtn_release -+}; -+ -+ -+static struct miscdevice mtx1sysbtn_miscdev = { -+ MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ , -+ "btn", -+ &mtx1sysbtn_fops -+}; -+ -+ -+ -+//---------[ Module Functions ]----------------- -+ -+ -+void __exit exit_mtx1_sysbtn (void) -+{ -+ is_inuse = 1; -+ mtx1_btn_stopirq (); -+ misc_deregister(&mtx1sysbtn_miscdev); -+} -+ -+ -+static int __init init_mtx1_sysbtn (void) -+{ -+ printk("MTX-1 System Button driver\n"); -+ is_inuse = 1; -+ mtx1_initbuttons (); -+ if (misc_register (&mtx1sysbtn_miscdev) >= 0) { -+ mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor; -+ if (mtx1_btn_startirq () == 0) { -+ is_inuse=0; -+ return 0; -+ } -+ misc_deregister(&mtx1sysbtn_miscdev); -+ } -+ return 1; -+} -+ -+module_init(init_mtx1_sysbtn); -+module_exit(exit_mtx1_sysbtn); -+ -+MODULE_AUTHOR("Michael Stickel"); -+MODULE_DESCRIPTION("Driver for the MTX-1 system button"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch b/target/linux/au1000-2.6/patches/011-mtx1_leds.patch deleted file mode 100644 index 93c681e96..000000000 --- a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig ---- linux-2.6.19.2/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/drivers/leds/Kconfig 2007-03-02 13:50:28.000000000 +0100 -@@ -76,6 +76,13 @@ - This option enables support for the Soekris net4801 and net4826 error - LED. - -+config LEDS_MTX1 -+ tristate "LED Support for MTX-1 boards" -+ depends on LEDS_CLASS && MIPS_MTX1 -+ help -+ This option enables support for the MTX-1 power and status LED. -+ -+ - comment "LED Triggers" - - config LEDS_TRIGGERS -diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile ---- linux-2.6.21.1/drivers/leds/Makefile 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/drivers/leds/Makefile 2007-05-24 23:39:18.000000000 +0200 -@@ -16,6 +16,7 @@ - obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o - obj-$(CONFIG_LEDS_H1940) += leds-h1940.o - obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o -+obj-$(CONFIG_LEDS_MTX1) += leds-mtx1.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch b/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch deleted file mode 100644 index 8f078428c..000000000 --- a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c.old 2007-04-06 15:01:13.503777992 +0200 -+++ linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c 2007-04-06 15:01:36.296313000 +0200 -@@ -39,7 +39,6 @@ - - int prom_argc; - char **prom_argv, **prom_envp; --extern void __init prom_init_cmdline(void); - extern char *prom_getenv(char *envname); - - const char *get_system_type(void) -@@ -59,7 +58,7 @@ - mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_MTX1; /* set the platform # */ - -- prom_init_cmdline(); -+ strcpy(arcs_cmdline, CONFIG_CMDLINE); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) diff --git a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch b/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch deleted file mode 100644 index 7793161af..000000000 --- a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.19.2/drivers/mtd/maps/mtx-1_flash.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-2.6.19.2.new/drivers/mtd/maps/mtx-1_flash.c 2007-07-23 12:21:16.000000000 +0200 -@@ -28,7 +28,7 @@ - - static struct mtd_partition mtx1_partitions[] = { - { -- .name = "filesystem", -+ .name = "rootfs", - .size = 0x01C00000, - .offset = 0, - },{ diff --git a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch b/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch deleted file mode 100644 index 6187a7d5a..000000000 --- a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- linux-2.6.22.1.orig/drivers/net/au1000_eth.c 2007-07-24 18:43:25.527583520 +0200 -+++ linux-2.6.22.1/drivers/net/au1000_eth.c 2007-07-24 23:07:00.388821102 +0200 -@@ -1320,9 +1320,12 @@ - } - } - -+#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) - static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) - { - struct au1000_private *aup = (struct au1000_private *)dev->priv; -+ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) -+ return -EINVAL; - - if (!netif_running(dev)) return -EINVAL; - diff --git a/target/linux/au1000-2.6/patches/015-pci-resource.patch b/target/linux/au1000-2.6/patches/015-pci-resource.patch deleted file mode 100644 index ddbb7ed8a..000000000 --- a/target/linux/au1000-2.6/patches/015-pci-resource.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- linux-2.6.22.1.orig/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 18:44:21.598778839 +0200 -+++ linux-2.6.22.1/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 22:08:49.761901610 +0200 -@@ -1680,9 +1680,9 @@ - #define PCI_LAST_DEVFN (19<<3) - - #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ --#define IOPORT_RESOURCE_END 0xffffffff -+#define IOPORT_RESOURCE_END 0xfffffffffULL - #define IOMEM_RESOURCE_START 0x10000000 --#define IOMEM_RESOURCE_END 0xffffffff -+#define IOMEM_RESOURCE_END 0xfffffffffULL - - /* - * Borrowed from the PPC arch: diff --git a/target/linux/au1000-2.6/patches/016-pci-io_map.patch b/target/linux/au1000-2.6/patches/016-pci-io_map.patch deleted file mode 100644 index 6a80f7cb4..000000000 --- a/target/linux/au1000-2.6/patches/016-pci-io_map.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c 2007-07-24 18:42:21.031908123 +0200 -+++ linux-2.6.22.1/arch/mips/au1000/common/pci.c 2007-07-24 22:12:07.373162835 +0200 -@@ -74,6 +74,7 @@ - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } -+ au1x_controller.io_map_base = virt_io_addr; - - #ifdef CONFIG_DMA_NONCOHERENT - { diff --git a/target/linux/au1000-2.6/patches/017-usb-power.patch b/target/linux/au1000-2.6/patches/017-usb-power.patch deleted file mode 100644 index 7f7fac85b..000000000 --- a/target/linux/au1000-2.6/patches/017-usb-power.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:57:35.000000000 +0200 -+++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:59:48.000000000 +0200 -@@ -54,7 +54,7 @@ - - void __init board_setup(void) - { --#ifdef CONFIG_USB_OHCI -+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - // enable USB power switch - au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); - au_writel( 0x100000, GPIO2_OUTPUT ); diff --git a/target/linux/au1000-2.6/profiles/Atheros.mk b/target/linux/au1000-2.6/profiles/Atheros.mk deleted file mode 100644 index ec6e175e8..000000000 --- a/target/linux/au1000-2.6/profiles/Atheros.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Atheros - NAME:=Atheros WiFi (default) - PACKAGES:=kmod-madwifi -endef -$(eval $(call Profile,Atheros)) - diff --git a/target/linux/au1000-2.6/profiles/Broadcom.mk b/target/linux/au1000-2.6/profiles/Broadcom.mk deleted file mode 100644 index d7fb9cb80..000000000 --- a/target/linux/au1000-2.6/profiles/Broadcom.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Broadcom - NAME:=Broadcom BCM43xx WiFi - PACKAGES:=kmod-net-bcm43xx -endef -$(eval $(call Profile,Broadcom)) - diff --git a/target/linux/au1000-2.6/profiles/Intel.mk b/target/linux/au1000-2.6/profiles/Intel.mk deleted file mode 100644 index be112eea9..000000000 --- a/target/linux/au1000-2.6/profiles/Intel.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Intel - NAME:=Intel IPW2200 WiFi - PACKAGES:=kmod-net-ipw2200 -endef -$(eval $(call Profile,Intel)) - -- cgit v1.2.3