From c7f2977365f1fb2037a089a6a190ea5e8ebbc114 Mon Sep 17 00:00:00 2001 From: blogic Date: Sun, 3 Jul 2011 18:51:59 +0000 Subject: AT91: Add flexibity board support The patch below adds AT91 Flexibity Connect board support. Signed-off-by: Maxim Osipov git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27412 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../at91/flexibity/base-files/etc/config/network | 20 ++++++++++++++++++++ .../base-files/etc/init.d/custom-user-startup | 22 ++++++++++++++++++++++ 2 files changed, 42 insertions(+) create mode 100644 target/linux/at91/flexibity/base-files/etc/config/network create mode 100644 target/linux/at91/flexibity/base-files/etc/init.d/custom-user-startup (limited to 'target/linux/at91/flexibity/base-files') diff --git a/target/linux/at91/flexibity/base-files/etc/config/network b/target/linux/at91/flexibity/base-files/etc/config/network new file mode 100644 index 000000000..5800a0bff --- /dev/null +++ b/target/linux/at91/flexibity/base-files/etc/config/network @@ -0,0 +1,20 @@ + +config 'interface' 'loopback' + option 'ifname' 'lo' + option 'proto' 'static' + option 'ipaddr' '127.0.0.1' + option 'netmask' '255.0.0.0' + +config 'interface' 'cfg' + option 'ifname' 'usb0' + option 'proto' 'static' + option 'netmask' '255.255.255.0' + option 'gateway' '192.168.119.1' + option 'ipaddr' '192.168.119.2' + +config 'interface' 'lan' + option 'ifname' 'wlan0' + option 'proto' 'dhcp' + +#config 'interface' 'wan' +# option diff --git a/target/linux/at91/flexibity/base-files/etc/init.d/custom-user-startup b/target/linux/at91/flexibity/base-files/etc/init.d/custom-user-startup new file mode 100644 index 000000000..dc9f77c98 --- /dev/null +++ b/target/linux/at91/flexibity/base-files/etc/init.d/custom-user-startup @@ -0,0 +1,22 @@ +#!/bin/sh /etc/rc.common +START=90 +# place your own startup commands here +# +# REMEMBER: You *MUST* place an '&' after launching programs you +# that are to continue running in the background. +# +# i.e. +# BAD: upnpd +# GOOD: upnpd & +# +# Failure to do this will result in the startup process halting +# on this file and the diagnostic light remaining on (at least +# for WRT54G(s) models). +# + +# coldplug USB devices +udevtrigger & + +# wait for coldplug and re-generate wireless config +#wifi detect > /etc/config/wireless & + -- cgit v1.2.3