From bfa2f874b92a8eb44e50cdad05cd37ff5ec24bb8 Mon Sep 17 00:00:00 2001
From: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Tue, 8 Dec 2009 10:29:35 +0000
Subject: ar71xx: add mdio bus driver for the rtl8366 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18694 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
target/linux/ar71xx/config-2.6.28 | 1 +
target/linux/ar71xx/config-2.6.30 | 1 +
target/linux/ar71xx/config-2.6.31 | 1 +
target/linux/ar71xx/config-2.6.32 | 1 +
.../ar71xx/files/drivers/net/phy/rtl8366_smi.c | 661 +++++++++++++++++++++
.../linux/ar71xx/files/include/linux/rtl8366_smi.h | 19 +
.../patches-2.6.28/204-rtl8366-smi-driver.patch | 21 +
.../patches-2.6.30/204-rtl8366-smi-driver.patch | 21 +
.../patches-2.6.31/204-rtl8366-smi-driver.patch | 21 +
.../patches-2.6.32/204-rtl8366-smi-driver.patch | 21 +
10 files changed, 768 insertions(+)
create mode 100644 target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c
create mode 100644 target/linux/ar71xx/files/include/linux/rtl8366_smi.h
create mode 100644 target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch
create mode 100644 target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch
create mode 100644 target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch
create mode 100644 target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
(limited to 'target/linux/ar71xx')
diff --git a/target/linux/ar71xx/config-2.6.28 b/target/linux/ar71xx/config-2.6.28
index b15525915..83587906e 100644
--- a/target/linux/ar71xx/config-2.6.28
+++ b/target/linux/ar71xx/config-2.6.28
@@ -162,6 +162,7 @@ CONFIG_PHYLIB=y
# CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_R6040 is not set
CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30
index 0db13af3c..3cedfdc46 100644
--- a/target/linux/ar71xx/config-2.6.30
+++ b/target/linux/ar71xx/config-2.6.30
@@ -166,6 +166,7 @@ CONFIG_PHYLIB=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31
index 2e4a56be4..0615a50f4 100644
--- a/target/linux/ar71xx/config-2.6.31
+++ b/target/linux/ar71xx/config-2.6.31
@@ -169,6 +169,7 @@ CONFIG_PHYLIB=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32
index dcca7d22b..f1a69bc0b 100644
--- a/target/linux/ar71xx/config-2.6.32
+++ b/target/linux/ar71xx/config-2.6.32
@@ -173,6 +173,7 @@ CONFIG_PHYLIB=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
diff --git a/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c b/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c
new file mode 100644
index 000000000..e43f8a2d0
--- /dev/null
+++ b/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c
@@ -0,0 +1,661 @@
+/*
+ * Platform driver for the Realtek RTL8366 ethernet switch
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/rtl8366_smi.h>
+
+//#define DEBUG 1
+
+#define RTL8366_SMI_DRIVER_NAME "rtl8366-smi"
+#define RTL8366_SMI_DRIVER_DESC "Realtek RTL8366 switch driver"
+#define RTL8366_SMI_DRIVER_VER "0.1.0"
+
+#define RTL8366S_PHY_NO_MAX 4
+#define RTL8366S_PHY_PAGE_MAX 7
+#define RTL8366S_PHY_ADDR_MAX 31
+
+#define RTL8366S_CHIP_VERSION_CTRL_REG 0x0104
+#define RTL8366S_CHIP_VERSION_MASK 0xf
+#define RTL8366S_CHIP_ID_REG 0x0105
+#define RTL8366S_CHIP_ID_8366 0x8366
+
+/* PHY registers control */
+#define RTL8366S_PHY_ACCESS_CTRL_REG 0x8028
+#define RTL8366S_PHY_ACCESS_DATA_REG 0x8029
+
+#define RTL8366S_PHY_CTRL_READ 1
+#define RTL8366S_PHY_CTRL_WRITE 0
+
+#define RTL8366S_PHY_REG_MASK 0x1f
+#define RTL8366S_PHY_PAGE_OFFSET 5
+#define RTL8366S_PHY_PAGE_MASK (0x7 << 5)
+#define RTL8366S_PHY_NO_OFFSET 9
+#define RTL8366S_PHY_NO_MASK (0x1f << 9)
+
+#define RTL8366_SMI_ACK_RETRY_COUNT 5
+#define RTL8366_SMI_CLK_DELAY 10 /* nsec */
+
+struct rtl8366_smi {
+ struct platform_device *pdev;
+ struct rtl8366_smi_platform_data *pdata;
+ spinlock_t lock;
+ struct mii_bus *mii_bus;
+ int mii_irq[PHY_MAX_ADDR];
+};
+
+static inline void rtl8366_smi_clk_delay(struct rtl8366_smi *smi)
+{
+ ndelay(RTL8366_SMI_CLK_DELAY);
+}
+
+static void rtl8366_smi_start(struct rtl8366_smi *smi)
+{
+ unsigned int sda = smi->pdata->gpio_sda;
+ unsigned int sck = smi->pdata->gpio_sck;
+
+ /*
+ * Set GPIO pins to output mode, with initial state:
+ * SCK = 0, SDA = 1
+ */
+ gpio_direction_output(sck, 0);
+ gpio_direction_output(sda, 1);
+ rtl8366_smi_clk_delay(smi);
+
+ /* CLK 1: 0 -> 1, 1 -> 0 */
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 0);
+ rtl8366_smi_clk_delay(smi);
+
+ /* CLK 2: */
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sda, 0);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 0);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sda, 1);
+}
+
+static void rtl8366_smi_stop(struct rtl8366_smi *smi)
+{
+ unsigned int sda = smi->pdata->gpio_sda;
+ unsigned int sck = smi->pdata->gpio_sck;
+
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sda, 0);
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sda, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 0);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 1);
+
+ /* add a click */
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 0);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 1);
+
+ /* set GPIO pins to input mode */
+ gpio_direction_input(sda);
+ gpio_direction_input(sck);
+}
+
+static void rtl8366_smi_write_bits(struct rtl8366_smi *smi, u32 data, u32 len)
+{
+ unsigned int sda = smi->pdata->gpio_sda;
+ unsigned int sck = smi->pdata->gpio_sck;
+
+ for (; len > 0; len--) {
+ rtl8366_smi_clk_delay(smi);
+
+ /* prepare data */
+ if ( data & ( 1 << (len - 1)) )
+ gpio_set_value(sda, 1);
+ else
+ gpio_set_value(sda, 0);
+ rtl8366_smi_clk_delay(smi);
+
+ /* clocking */
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ gpio_set_value(sck, 0);
+ }
+}
+
+static void rtl8366_smi_read_bits(struct rtl8366_smi *smi, u32 len, u32 *data)
+{
+ unsigned int sda = smi->pdata->gpio_sda;
+ unsigned int sck = smi->pdata->gpio_sck;
+
+ gpio_direction_input(sda);
+
+ for (*data = 0; len > 0; len--) {
+ u32 u;
+
+ rtl8366_smi_clk_delay(smi);
+
+ /* clocking */
+ gpio_set_value(sck, 1);
+ rtl8366_smi_clk_delay(smi);
+ u = gpio_get_value(sda);
+ gpio_set_value(sck, 0);
+
+ *data |= (u << (len - 1));
+ }
+
+ gpio_direction_output(sda, 0);
+}
+
+static int rtl8366_smi_wait_for_ack(struct rtl8366_smi *smi)
+{
+ int retry_cnt;
+
+ retry_cnt = 0;
+ do {
+ u32 ack;
+
+ rtl8366_smi_read_bits(smi, 1, &ack);
+ if (ack == 0)
+ break;
+
+ if (++retry_cnt > RTL8366_SMI_ACK_RETRY_COUNT)
+ return -EIO;
+ } while (1);
+
+ return 0;
+}
+
+static int rtl8366_smi_write_byte(struct rtl8366_smi *smi, u8 data)
+{
+ rtl8366_smi_write_bits(smi, data, 8);
+ return rtl8366_smi_wait_for_ack(smi);
+}
+
+static int rtl8366_smi_read_byte0(struct rtl8366_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* read data */
+ rtl8366_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* send an ACK */
+ rtl8366_smi_write_bits(smi, 0x00, 1);
+
+ return 0;
+}
+
+static int rtl8366_smi_read_byte1(struct rtl8366_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* read data */
+ rtl8366_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* send an ACK */
+ rtl8366_smi_write_bits(smi, 0x01, 1);
+
+ return 0;
+}
+
+static int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data)
+{
+ unsigned long flags;
+ u8 lo = 0;
+ u8 hi = 0;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ rtl8366_smi_start(smi);
+
+ /* send READ command */
+ ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x01);
+ if (ret)
+ goto out;
+
+ /* set ADDR[7:0] */
+ ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* set ADDR[15:8] */
+ ret = rtl8366_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* read DATA[7:0] */
+ rtl8366_smi_read_byte0(smi, &lo);
+ /* read DATA[15:8] */
+ rtl8366_smi_read_byte1(smi, &hi);
+
+ *data = ((u32) lo) | (((u32) hi) << 8);
+
+ ret = 0;
+
+ out:
+ rtl8366_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+static int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ rtl8366_smi_start(smi);
+
+ /* send WRITE command */
+ ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x00);
+ if (ret)
+ goto out;
+
+ /* set ADDR[7:0] */
+ ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* set ADDR[15:8] */
+ ret = rtl8366_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* write DATA[7:0] */
+ ret = rtl8366_smi_write_byte(smi, data & 0xff);
+ if (ret)
+ goto out;
+
+ /* write DATA[15:8] */
+ ret = rtl8366_smi_write_byte(smi, data >> 8);
+ if (ret)
+ goto out;
+
+ ret = 0;
+
+ out:
+ rtl8366_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+static int rtl8366_smi_read_phy_reg(struct rtl8366_smi *smi,
+ u32 phy_no, u32 page, u32 addr, u32 *data)
+{
+ u32 reg;
+ int ret;
+
+ if (phy_no > RTL8366S_PHY_NO_MAX)
+ return -EINVAL;
+
+ if (page > RTL8366S_PHY_PAGE_MAX)
+ return -EINVAL;
+
+ if (addr > RTL8366S_PHY_ADDR_MAX)
+ return -EINVAL;
+
+ ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+ RTL8366S_PHY_CTRL_READ);
+ if (ret)
+ return ret;
+
+ reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+ ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+ (addr & RTL8366S_PHY_REG_MASK);
+
+ ret = rtl8366_smi_write_reg(smi, reg, 0);
+ if (ret)
+ return ret;
+
+ ret = rtl8366_smi_read_reg(smi, RTL8366S_PHY_ACCESS_DATA_REG, data);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8366_smi_write_phy_reg(struct rtl8366_smi *smi,
+ u32 phy_no, u32 page, u32 addr, u32 data)
+{
+ u32 reg;
+ int ret;
+
+ if (phy_no > RTL8366S_PHY_NO_MAX)
+ return -EINVAL;
+
+ if (page > RTL8366S_PHY_PAGE_MAX)
+ return -EINVAL;
+
+ if (addr > RTL8366S_PHY_ADDR_MAX)
+ return -EINVAL;
+
+ ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+ RTL8366S_PHY_CTRL_WRITE);
+ if (ret)
+ return ret;
+
+ reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+ ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+ (addr & RTL8366S_PHY_REG_MASK);
+
+ ret = rtl8366_smi_write_reg(smi, reg, data);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+#ifdef DEBUG
+static void rtl8366_smi_dump_regs(struct rtl8366_smi *smi)
+{
+ u32 t;
+ int err;
+ int i;
+
+ for (i = 0; i < 0x200; i++) {
+ err = rtl8366_smi_read_reg(smi, i, &t);
+ if (err) {
+ dev_err(&smi->pdev->dev,
+ "unable to read register %04x\n", i);
+ return;
+ }
+ dev_info(&smi->pdev->dev, "reg %04x: %04x\n", i, t);
+ }
+
+ for (i = 0; i <= RTL8366S_PHY_NO_MAX; i++) {
+ int j;
+
+ for (j = 0; j <= RTL8366S_PHY_ADDR_MAX; j++) {
+ err = rtl8366_smi_read_phy_reg(smi, i, 0, j, &t);
+ if (err) {
+ dev_err(&smi->pdev->dev,
+ "unable to read PHY%u:%02x register\n",
+ i, j);
+ return;
+ }
+ dev_info(&smi->pdev->dev,
+ "PHY%u:%02x: %04x\n", i, j, t);
+ }
+ }
+}
+#else
+static inline void rtl8366_smi_dump_regs(struct rtl8366_smi *smi) {}
+#endif
+
+static int rtl8366_smi_mii_read(struct mii_bus *bus, int addr, int reg)
+{
+ struct rtl8366_smi *smi = bus->priv;
+ u32 val = 0;
+ int err;
+
+ err = rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &val);
+ if (err)
+ return 0xffff;
+
+ return val;
+}
+
+static int rtl8366_smi_mii_write(struct mii_bus *bus, int addr, int reg,
+ u16 val)
+{
+ struct rtl8366_smi *smi = bus->priv;
+ u32 t;
+ int err;
+
+ err = rtl8366_smi_write_phy_reg(smi, addr, 0, reg, val);
+ /* flush write */
+ (void) rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &t);
+
+ return err;
+}
+
+static int rtl8366_smi_mii_init(struct rtl8366_smi *smi)
+{
+ int ret;
+ int i;
+
+ smi->mii_bus = mdiobus_alloc();
+ if (smi->mii_bus == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&smi->lock);
+ smi->mii_bus->priv = (void *) smi;
+ smi->mii_bus->name = "rtl8366-smi";
+ smi->mii_bus->read = rtl8366_smi_mii_read;
+ smi->mii_bus->write = rtl8366_smi_mii_write;
+ snprintf(smi->mii_bus->id, MII_BUS_ID_SIZE, "%s",
+ dev_name(&smi->pdev->dev));
+ smi->mii_bus->parent = &smi->pdev->dev;
+ smi->mii_bus->phy_mask = ~(0x1f);
+ smi->mii_bus->irq = smi->mii_irq;
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ smi->mii_irq[i] = PHY_POLL;
+
+ rtl8366_smi_dump_regs(smi);
+
+ ret = mdiobus_register(smi->mii_bus);
+ if (ret)
+ goto err_free;
+
+ rtl8366_smi_dump_regs(smi);
+
+ return 0;
+
+ err_free:
+ mdiobus_free(smi->mii_bus);
+ err:
+ return ret;
+}
+
+static void rtl8366_smi_mii_cleanup(struct rtl8366_smi *smi)
+{
+ mdiobus_unregister(smi->mii_bus);
+ mdiobus_free(smi->mii_bus);
+}
+
+static int rtl8366_smi_setup(struct rtl8366_smi *smi)
+{
+ u32 chip_id = 0;
+ u32 chip_ver = 0;
+ int ret;
+
+ ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_ID_REG, &chip_id);
+ if (ret) {
+ dev_err(&smi->pdev->dev, "unable to read chip id\n");
+ return ret;
+ }
+
+ switch (chip_id) {
+ case RTL8366S_CHIP_ID_8366:
+ break;
+ default:
+ dev_err(&smi->pdev->dev, "unknown chip id (%04x)\n", chip_id);
+ return -ENODEV;
+ }
+
+ ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_VERSION_CTRL_REG,
+ &chip_ver);
+ if (ret) {
+ dev_err(&smi->pdev->dev, "unable to read chip version\n");
+ return ret;
+ }
+
+ dev_info(&smi->pdev->dev, "RTL%04x ver. %u chip found\n",
+ chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK);
+
+ return 0;
+}
+
+static int __init rtl8366_smi_probe(struct platform_device *pdev)
+{
+ static int rtl8366_smi_version_printed;
+ struct rtl8366_smi_platform_data *pdata;
+ struct rtl8366_smi *smi;
+ int err;
+
+ if (!rtl8366_smi_version_printed++)
+ printk(KERN_NOTICE RTL8366_SMI_DRIVER_DESC
+ " version " RTL8366_SMI_DRIVER_VER"\n");
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ smi = kzalloc(sizeof(struct rtl8366_smi), GFP_KERNEL);
+ if (!smi) {
+ dev_err(&pdev->dev, "no memory for private data\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ err = gpio_request(pdata->gpio_sda, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+ pdata->gpio_sda, err);
+ goto err_free_smi;
+ }
+
+ err = gpio_request(pdata->gpio_sck, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+ pdata->gpio_sck, err);
+ goto err_free_sda;
+ }
+
+ smi->pdev = pdev;
+ smi->pdata = pdata;
+ spin_lock_init(&smi->lock);
+
+ platform_set_drvdata(pdev, smi);
+
+ dev_info(&pdev->dev, "using GPIO pins %u (SDA) and %u (SCK)\n",
+ pdata->gpio_sda, pdata->gpio_sck);
+
+ err = rtl8366_smi_setup(smi);
+ if (err)
+ goto err_clear_drvdata;
+
+ err = rtl8366_smi_mii_init(smi);
+ if (err)
+ goto err_clear_drvdata;
+
+ return 0;
+
+ err_clear_drvdata:
+ platform_set_drvdata(pdev, NULL);
+ gpio_free(pdata->gpio_sck);
+ err_free_sda:
+ gpio_free(pdata->gpio_sda);
+ err_free_smi:
+ kfree(smi);
+ err_out:
+ return err;
+}
+
+static int __devexit rtl8366_smi_remove(struct platform_device *pdev)
+{
+ struct rtl8366_smi *smi = platform_get_drvdata(pdev);
+
+ if (smi) {
+ struct rtl8366_smi_platform_data *pdata;
+
+ pdata = pdev->dev.platform_data;
+
+ rtl8366_smi_mii_cleanup(smi);
+ platform_set_drvdata(pdev, NULL);
+ gpio_free(pdata->gpio_sck);
+ gpio_free(pdata->gpio_sda);
+ kfree(smi);
+ }
+
+ return 0;
+}
+
+int rtl8366_phy_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct platform_driver rtl8366_smi_driver = {
+ .driver = {
+ .name = RTL8366_SMI_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = rtl8366_smi_probe,
+ .remove = __devexit_p(rtl8366_smi_remove),
+};
+
+static struct phy_driver rtl8366_smi_phy_driver = {
+ .phy_id = 0x001cc960,
+ .name = "Realtek RTL8366",
+ .phy_id_mask = 0x1ffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config_aneg = rtl8366_phy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rtl8366_smi_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&rtl8366_smi_phy_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&rtl8366_smi_driver);
+ if (ret)
+ goto err_phy_unregister;
+
+ return 0;
+
+ err_phy_unregister:
+ phy_driver_unregister(&rtl8366_smi_phy_driver);
+ return ret;
+}
+module_init(rtl8366_smi_init);
+
+static void __exit rtl8366_smi_exit(void)
+{
+ platform_driver_unregister(&rtl8366_smi_driver);
+ phy_driver_unregister(&rtl8366_smi_phy_driver);
+}
+module_exit(rtl8366_smi_exit);
+
+MODULE_DESCRIPTION(RTL8366_SMI_DRIVER_DESC);
+MODULE_VERSION(RTL8366_SMI_DRIVER_VER);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" RTL8366_SMI_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/include/linux/rtl8366_smi.h b/target/linux/ar71xx/files/include/linux/rtl8366_smi.h
new file mode 100644
index 000000000..cd0fcbc45
--- /dev/null
+++ b/target/linux/ar71xx/files/include/linux/rtl8366_smi.h
@@ -0,0 +1,19 @@
+/*
+ * Platform data definition for the Realtek RTL8366 ethernet switch driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_SMI_H
+#define _RTL8366_SMI_H
+
+struct rtl8366_smi_platform_data {
+ unsigned gpio_sda;
+ unsigned gpio_sck;
+};
+
+#endif /* _RTL8366_SMI_H */
diff --git a/target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch
new file mode 100644
index 000000000..afb3cbdb7
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
++config RTL8366_SMI
++ tristate "Support for RTL8366 switch via SMI interface"
++ depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_IP175C_PHY) += ip175c.o
+ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
diff --git a/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch
new file mode 100644
index 000000000..77874b49f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
++config RTL8366_SMI
++ tristate "Support for RTL8366 switch via SMI interface"
++ depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY) += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
diff --git a/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch
new file mode 100644
index 000000000..77874b49f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
++config RTL8366_SMI
++ tristate "Support for RTL8366 switch via SMI interface"
++ depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY) += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
diff --git a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
new file mode 100644
index 000000000..78ec2e44c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -146,4 +146,8 @@ config MDIO_GPIO
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
++config RTL8366_SMI
++ tristate "Support for RTL8366 switch via SMI interface"
++ depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_IP175C_PHY) += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
--
cgit v1.2.3