From df8899699763cad9836775f7ba28410422abc7b4 Mon Sep 17 00:00:00 2001 From: juhosg Date: Sun, 28 Oct 2012 19:52:02 +0000 Subject: ar71xx: add initial support for 3.6 The nand subtarget is not working yet. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33983 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-3.6/433-spi-rb4xx-cpld-driver.patch | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 target/linux/ar71xx/patches-3.6/433-spi-rb4xx-cpld-driver.patch (limited to 'target/linux/ar71xx/patches-3.6/433-spi-rb4xx-cpld-driver.patch') diff --git a/target/linux/ar71xx/patches-3.6/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.6/433-spi-rb4xx-cpld-driver.patch new file mode 100644 index 000000000..0d8cd9991 --- /dev/null +++ b/target/linux/ar71xx/patches-3.6/433-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -479,6 +479,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on ATH79_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o -- cgit v1.2.3