From b80a2c45e4c7b99f4bce41381d5ce9cb5c2bd3dd Mon Sep 17 00:00:00 2001 From: juhosg Date: Wed, 1 Aug 2012 12:24:52 +0000 Subject: ar71xx: Buffalo WLAE-AG300N initial support The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../610-MIPS-ath79-openwrt-machines.patch | 24 +++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'target/linux/ar71xx/patches-3.3') diff --git a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch index f0727ad81..6ef787124 100644 --- a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,18 +16,91 @@ +@@ -16,18 +16,92 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -78,6 +78,7 @@ + ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ + ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ + ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ ++ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ + ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ + ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ + ATH79_MACH_WP543, /* Compex WP543 */ @@ -186,7 +187,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -66,6 +137,419 @@ config ATH79_MACH_PB44 +@@ -66,6 +137,427 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -216,6 +217,14 @@ + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + ++config ATH79_MACH_WLAE_AG300N ++ bool "Buffalo WLAE-AG300N board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ +config ATH79_MACH_WZR_HP_AG300H + bool "Buffalo WZR-HP-AG300H board support" + select SOC_AR71XX @@ -606,7 +615,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM (rev 1.0) board" select SOC_AR724X -@@ -79,6 +563,24 @@ config ATH79_MACH_UBNT_XM +@@ -79,6 +571,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -631,7 +640,7 @@ endmenu config SOC_AR71XX -@@ -114,10 +616,6 @@ config SOC_QCA955X +@@ -114,10 +624,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -642,7 +651,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -128,7 +626,14 @@ config ATH79_DEV_DSA +@@ -128,7 +634,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -658,7 +667,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -153,4 +658,7 @@ config ATH79_NVRAM +@@ -153,4 +666,7 @@ config ATH79_NVRAM config ATH79_PCI_ATH9K_FIXUP def_bool n @@ -668,7 +677,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -36,9 +36,61 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p +@@ -36,9 +36,62 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o # # Machines # @@ -720,6 +729,7 @@ +obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o +obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o ++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o +obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o +obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o +obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -- cgit v1.2.3