From dfba2f5fb19c96511b4f389a65492be66b908f07 Mon Sep 17 00:00:00 2001 From: acoul Date: Thu, 21 Apr 2011 11:45:23 +0000 Subject: linux/ar71xx: add 2.6.38 preliminary support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-2.6.38/153-spi-rb4xx-cpld-driver.patch | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch (limited to 'target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch') diff --git a/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch new file mode 100644 index 000000000..109e815cb --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -450,6 +450,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -61,6 +61,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... -- cgit v1.2.3