From e47c4f9d9e5e5fd7ae829fc09a897974cc3ed7a6 Mon Sep 17 00:00:00 2001
From: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 22 Jan 2010 17:38:07 +0000
Subject: rtl8366_smi: move RTL8366S driver into a separate file

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../patches-2.6.32/204-rtl8366-smi-driver.patch    | 24 ++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

(limited to 'target/linux/ar71xx/patches-2.6.32')

diff --git a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
index 383513cda..fbd52c3b7 100644
--- a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
@@ -1,27 +1,39 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -146,4 +146,14 @@ config MDIO_GPIO
+@@ -146,4 +146,25 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  
 +config RTL8366_SMI
-+	tristate "Support for RTL8366 switch via SMI interface"
++	tristate "Driver for the RTL8366 SMI interface"
 +	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
 +
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366S driver DEBUG_FS support"
-+	depends on RTL8366_SMI
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366S switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY
 +	depends on DEBUG_FS
 +	default n
++
++endif # RTL8366_SMI
 +
  endif # PHYLIB
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+@@ -20,6 +20,8 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
  obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
  obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_MICREL)		+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
-- 
cgit v1.2.3