From cdf64b5cdccae03ff3d9dfc3c01a5e817b233178 Mon Sep 17 00:00:00 2001 From: nbd Date: Sun, 18 Dec 2011 22:20:17 +0000 Subject: ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig | 9 + .../linux/ar71xx/files/arch/mips/ar71xx/Makefile | 1 + .../files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c | 195 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ar71xx/machtype.h | 1 + 4 files changed, 206 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c (limited to 'target/linux/ar71xx/files/arch/mips') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 467286163..52d8313da 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -163,6 +163,15 @@ config AR71XX_MACH_WZR_HP_G300NH select AR71XX_DEV_USB select RTL8366_SMI +config AR71XX_MACH_WZR_HP_G300NH2 + bool "Buffalo WZR-HP-G300NH2 board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + config AR71XX_MACH_WHR_HP_G300N bool "Buffalo WHR-HP-G300N board support" select SOC_AR724X diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index 7723bb061..9300d7a50 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o obj-$(CONFIG_AR71XX_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c new file mode 100644 index 000000000..ef9923fdd --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c @@ -0,0 +1,195 @@ +/* + * Buffalo WZR-HP-G300NH2 board support + * + * Copyright (C) 2011 Felix Fietkau + * Copyright (C) 2011 Mark Deneen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + + +#define WZRHPG300NH2_MAC_OFFSET 0x20c +#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e90000, + }, { + .name = "user_property", + .offset = 0x1ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f90000, + } +}; + +#endif /* CONFIG_MTD_PARTITIONS */ + + + +static struct flash_platform_data wzrhpg300nh2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpg300nh2_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), +#endif +}; + + +static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 16, + .active_low = 1, + }, +}; + +static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { + { + .name = "buffalo:blue:usb", + .gpio = 4, + .active_low = 1, + }, + { + .name = "buffalo:green:wireless", + .gpio = 5, + .active_low = 1, + }, + { + .name = "buffalo:orange:security", + .gpio = 6, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 7, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_on", + .gpio = 8, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_off", + .gpio = 9, + .active_low = 1, + }, +}; + +/* The AOSS button is wmac gpio 12 */ +static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 1, + }, { + .desc = "qos", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 11, + .active_low = 0, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 0, + }, +}; + + +static void __init wzrhpg300nh2_setup(void) +{ + + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; + /* There is an eth1 but it is not connected to the switch */ + + ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); + ar71xx_add_device_mdio(0, ~(BIT(0))); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_eth(0); + ar71xx_add_device_usb(); + /* gpio13 is usb power. Turn it on. */ + gpio_request(13, "usb"); + gpio_direction_output(13, 1); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), + wzrhpg300nh2_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg300nh2_gpio_keys), + wzrhpg300nh2_gpio_keys); + ap91_pci_setup_wmac_led_pin(22); + ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio, + ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); + + ap91_pci_init(eeprom, mac0); +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-G300NH2", + "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); + diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index 6c93c5688..00eee5160 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -77,6 +77,7 @@ enum ar71xx_mach_type { AR71XX_MACH_WRT400N, /* Linksys WRT400N */ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + AR71XX_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ AR71XX_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ -- cgit v1.2.3