From 775e69dfac39aed3ac55f98e1aec227eb0987958 Mon Sep 17 00:00:00 2001 From: juhosg Date: Sun, 9 Sep 2012 14:05:22 +0000 Subject: ar71xx: add preliminary support for Mikrotik RB2011L This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../ar71xx/files/arch/mips/ath79/mach-rb2011.c | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c (limited to 'target/linux/ar71xx/files/arch/mips') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c new file mode 100644 index 000000000..4f44ef4a3 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c @@ -0,0 +1,97 @@ +/* + * MikroTik RouterBOARD 2011 support + * + * Copyright (C) 2012 Stijn Tintel + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data rb2011_ar8327_data = { + .pad0_cfg = &rb2011_ar8327_pad0_cfg, + .cpuport_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + } +}; + +static struct mdio_board_info rb2011_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &rb2011_ar8327_data, + }, +}; + +static void __init rb2011_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); + + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | + AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); + t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE; + + __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init rb2011_setup(void) +{ + ath79_register_m25p80(NULL); + + rb2011_gmac_setup(); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + mdiobus_register_board_info(rb2011_mdio0_info, + ARRAY_SIZE(rb2011_mdio0_info)); + + /* GMAC0 is connected to an ar8327 switch */ + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + + ath79_register_eth(0); + + /* GMAC1 is connected to the internal switch */ + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L", + rb2011_setup); -- cgit v1.2.3