From 3d089c4fe3274942b0d2ca27da716405e4b66fd9 Mon Sep 17 00:00:00 2001 From: juhosg Date: Fri, 9 Apr 2010 08:40:14 +0000 Subject: ar71xx: update phy masks for the Planex boards This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c | 7 +++++-- target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'target/linux/ar71xx/files/arch/mips') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c index 42d0f81e6..bc8438f73 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c @@ -126,13 +126,16 @@ static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = { } }; +#define MZK_W04NU_WAN_PHYMASK BIT(4) +#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) + static void __init mzk_w04nu_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ar71xx_set_mac_base(eeprom); - ar71xx_add_device_mdio(0x0); + ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ar71xx_eth0_data.speed = SPEED_100; @@ -140,7 +143,7 @@ static void __init mzk_w04nu_setup(void) ar71xx_eth0_data.has_ar8216 = 1; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; + ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; ar71xx_add_device_eth(0); ar71xx_add_device_eth(1); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c index ed431d824..dfe7d0d6f 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c @@ -125,13 +125,16 @@ static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = { } }; +#define MZK_W300NH_WAN_PHYMASK BIT(4) +#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) + static void __init mzk_w300nh_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ar71xx_set_mac_base(eeprom); - ar71xx_add_device_mdio(0x0); + ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ar71xx_eth0_data.speed = SPEED_100; @@ -139,7 +142,7 @@ static void __init mzk_w300nh_setup(void) ar71xx_eth0_data.has_ar8216 = 1; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; + ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; ar71xx_add_device_eth(0); ar71xx_add_device_eth(1); -- cgit v1.2.3