From 2b1cf2b32ceaee4a99bf3b290f814095100962fb Mon Sep 17 00:00:00 2001 From: juhosg Date: Wed, 4 Jan 2012 17:30:47 +0000 Subject: ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar71xx/base-files/etc/uci-defaults/network | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/uci-defaults/network') diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index ba556c107..bf46fd765 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -108,6 +108,7 @@ aw-nr580 |\ bullet-m |\ eap7660d |\ rb-411 |\ +tl-mr3020 |\ tl-wa901nd-v2 |\ tl-wr703n |\ wp543) -- cgit v1.2.3