From b3c83b3b21eeec2ebf83c2e0310bc1d707037c7b Mon Sep 17 00:00:00 2001 From: juhosg Date: Thu, 4 Oct 2007 10:56:38 +0000 Subject: [adm5120] NAND driver cleanups, thanks to Alexandros C. Couloumbis for testing * use generic NAND driver from now * add experimental support for RouterBOARD 150 NAND device git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9118 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files/arch/mips/adm5120/boards/mikrotik.c | 159 ++++++++++++++++++--- .../adm5120/files/arch/mips/adm5120/platform.c | 47 ++++-- 2 files changed, 175 insertions(+), 31 deletions(-) (limited to 'target/linux/adm5120/files/arch/mips') diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c index cec57f7e9..fee9db803 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c @@ -1,11 +1,18 @@ /* * $Id$ * - * Mikrotik RouterBOARDs 1xx series + * Mikrotik RouterBOARD 1xx series * * Copyright (C) 2007 OpenWrt.org * Copyright (C) 2007 Gabor Juhos * + * NAND initialization code was based on a driver for Linux 2.6.19+ which + * was derived from the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series boards. + * Copyright (C) 2007 David Goodenough + * Copyright (C) 2007 Florian Fainelli + * The original Mikrotik code seems not to have a license. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 @@ -25,13 +32,33 @@ #include #include +#include #include #include +#include +#include +#include #include #include -#include + +#define RB1XX_NAND_CHIP_DELAY 25 + +#define RB150_NAND_BASE 0x1FC80000 +#define RB150_NAND_SIZE 1 + +#define RB150_GPIO_NAND_READY ADM5120_GPIO_PIN0 +#define RB150_GPIO_NAND_NCE ADM5120_GPIO_PIN1 +#define RB150_GPIO_NAND_CLE ADM5120_GPIO_P2L2 +#define RB150_GPIO_NAND_ALE ADM5120_GPIO_P3L2 + +#define RB150_NAND_DELAY 100 + +#define RB150_NAND_WRITE(v) \ + writeb((v),(void __iomem *)KSEG1ADDR(RB150_NAND_BASE)) + +/*--------------------------------------------------------------------------*/ static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), @@ -39,7 +66,7 @@ static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) }; -static struct mtd_partition rb1xx_partitions[] = { +static struct mtd_partition rb1xx_nor_partitions[] = { { .name = "booter", .offset = 0, @@ -52,24 +79,42 @@ static struct mtd_partition rb1xx_partitions[] = { } }; +static struct mtd_partition rb1xx_nand_partitions[] = { + { + .name = "kernel", + .offset = 0, + .size = 4 * 1024 * 1024, + } , { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + } +}; + static struct platform_device *rb1xx_devices[] __initdata = { &adm5120_flash0_device, &adm5120_nand_device, }; -static struct platform_device *rb150_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: nand device is not yet supported */ +/* + * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader + * will not be able to find the kernel that we load. So set the oobinfo + * when creating the partitions + */ +static struct nand_ecclayout rb1xx_nand_ecclayout = { + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; -static void __init rb1xx_setup(void) -{ - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); - adm5120_flash0_data.parts = rb1xx_partitions; - - /* TODO: setup mac address */ -} +static struct resource rb150_nand_resource[] = { + [0] = { + .start = RB150_NAND_BASE, + .end = RB150_NAND_BASE + RB150_NAND_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; #if 0 /* @@ -110,6 +155,86 @@ static unsigned char rb_vlans[6] __initdata = { #define rb192_vlans rb_vlans #endif +/*--------------------------------------------------------------------------*/ + +static int rb150_nand_ready(struct mtd_info *mtd) { + + return gpio_get_value(RB150_GPIO_NAND_READY); +} + +static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0); + gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0); + gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1); + } + + udelay(RB150_NAND_DELAY); + + if (cmd != NAND_CMD_NONE) + RB150_NAND_WRITE(cmd); +} + +/*--------------------------------------------------------------------------*/ + +static void __init rb1xx_mac_setup(void) +{ + /* TODO */ +} + +static void __init rb1xx_flash_setup(void) +{ + /* setup data for flash0 device */ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_partitions); + adm5120_flash0_data.parts = rb1xx_nor_partitions; + + /* setup data for NAND device */ + adm5120_nand_data.chip.nr_chips = 1; + adm5120_nand_data.chip.nr_partitions = ARRAY_SIZE(rb1xx_nand_partitions); + adm5120_nand_data.chip.partitions = rb1xx_nand_partitions; + adm5120_nand_data.chip.ecclayout = &rb1xx_nand_ecclayout; + adm5120_nand_data.chip.chip_delay = RB1XX_NAND_CHIP_DELAY; + adm5120_nand_data.chip.options = NAND_NO_AUTOINCR; +} + +static void __init rb1xx_setup(void) +{ + /* enable NAND flash interface */ + adm5120_nand_enable(); + + /* initialize NAND chip */ + adm5120_nand_set_spn(1); + adm5120_nand_set_wpn(0); + + rb1xx_flash_setup(); + rb1xx_mac_setup(); +} + +static void __init rb150_setup(void) +{ + /* setup GPIO pins for NAND flash chip */ + gpio_request(RB150_GPIO_NAND_READY, "nand-ready"); + gpio_direction_input(RB150_GPIO_NAND_READY); + gpio_request(RB150_GPIO_NAND_NCE, "nand-nce"); + gpio_direction_output(RB150_GPIO_NAND_NCE, 1); + gpio_request(RB150_GPIO_NAND_CLE, "nand-cle"); + gpio_direction_output(RB150_GPIO_NAND_CLE, 0); + gpio_request(RB150_GPIO_NAND_ALE, "nand-ale"); + gpio_direction_output(RB150_GPIO_NAND_ALE, 0); + + adm5120_nand_device.num_resources = ARRAY_SIZE(rb150_nand_resource); + adm5120_nand_device.resource = rb150_nand_resource; + adm5120_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl; + adm5120_nand_data.ctrl.dev_ready = rb150_nand_ready; + + rb1xx_flash_setup(); + rb1xx_mac_setup(); +} + +/*--------------------------------------------------------------------------*/ + static struct adm5120_board rb111_board __initdata = { .mach_type = MACH_ADM5120_RB_111, .name = "Mikrotik RouterBOARD 111", @@ -161,11 +286,11 @@ static struct adm5120_board rb133c_board __initdata = { static struct adm5120_board rb150_board __initdata = { .mach_type = MACH_ADM5120_RB_150, .name = "Mikrotik RouterBOARD 150", - .board_setup = rb1xx_setup, + .board_setup = rb150_setup, .eth_num_ports = 5, .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb150_devices), - .devices = rb150_devices, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, }; static struct adm5120_board rb153_board __initdata = { diff --git a/target/linux/adm5120/files/arch/mips/adm5120/platform.c b/target/linux/adm5120/files/arch/mips/adm5120/platform.c index 2a795c950..175e1a5d8 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/platform.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/platform.c @@ -32,14 +32,12 @@ #include #include -#include -#include -#include -#include -#include - -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, - unsigned int mctrl); +#include +#include +#include +#include +#include +#include #if 1 /* @@ -120,20 +118,23 @@ struct platform_device adm5120_flash1_device = { /* NAND flash */ struct resource adm5120_nand_resource[] = { [0] = { - .start = ADM5120_SRAM1_BASE, - .end = ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1, + .start = ADM5120_NAND_BASE, + .end = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1, .flags = IORESOURCE_MEM, }, }; -struct adm5120_nand_platform_data adm5120_nand_data; +struct platform_nand_data adm5120_nand_data = { + .ctrl.dev_ready = adm5120_nand_ready, + .ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl, +}; struct platform_device adm5120_nand_device = { - .name = "adm5120-nand", + .name = "gen_nand", .id = -1, - .dev.platform_data = &adm5120_nand_data, .num_resources = ARRAY_SIZE(adm5120_nand_resource), .resource = adm5120_nand_resource, + .dev.platform_data = &adm5120_nand_data, }; /* built-in UARTs */ @@ -173,7 +174,25 @@ struct amba_device adm5120_uart1_device = { .periphid = 0x0041010, }; -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, +void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { } + +int adm5120_nand_ready(struct mtd_info *mtd) +{ + return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0); +} + +void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + adm5120_nand_set_cle(ctrl & NAND_CLE); + adm5120_nand_set_ale(ctrl & NAND_ALE); + adm5120_nand_set_cen(ctrl & NAND_NCE); + } + + if (cmd != NAND_CMD_NONE) + NAND_WRITE_REG(NAND_REG_DATA, cmd); +} + -- cgit v1.2.3