From 17c7b6c3fdc48301e50d22cc6138ede16bd1be24 Mon Sep 17 00:00:00 2001 From: nbd Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../adm5120-2.6/files/arch/mips/adm5120/Kconfig | 20 -- .../adm5120-2.6/files/arch/mips/adm5120/Makefile | 15 - .../files/arch/mips/adm5120/adm5120_info.c | 93 ------ .../adm5120-2.6/files/arch/mips/adm5120/board.c | 129 -------- .../files/arch/mips/adm5120/boards/Makefile | 11 - .../files/arch/mips/adm5120/boards/cellvision.c | 192 ----------- .../files/arch/mips/adm5120/boards/compex.c | 222 ------------- .../files/arch/mips/adm5120/boards/edimax.c | 84 ----- .../files/arch/mips/adm5120/boards/generic.c | 53 --- .../files/arch/mips/adm5120/boards/infineon.c | 167 ---------- .../files/arch/mips/adm5120/boards/mikrotik.c | 172 ---------- .../files/arch/mips/adm5120/boards/zyxel.c | 127 -------- .../adm5120-2.6/files/arch/mips/adm5120/clock.c | 76 ----- .../adm5120-2.6/files/arch/mips/adm5120/gpio.c | 356 --------------------- .../adm5120-2.6/files/arch/mips/adm5120/irq.c | 203 ------------ .../adm5120-2.6/files/arch/mips/adm5120/memory.c | 179 ----------- .../adm5120-2.6/files/arch/mips/adm5120/platform.c | 181 ----------- .../adm5120-2.6/files/arch/mips/adm5120/prom.c | 276 ---------------- .../files/arch/mips/adm5120/prom/Makefile | 9 - .../files/arch/mips/adm5120/prom/bootbase.c | 124 ------- .../adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c | 86 ----- .../files/arch/mips/adm5120/prom/generic.c | 60 ---- .../files/arch/mips/adm5120/prom/myloader.c | 75 ----- .../files/arch/mips/adm5120/prom/prom_read.h | 63 ---- .../files/arch/mips/adm5120/prom/routerboot.c | 142 -------- .../adm5120-2.6/files/arch/mips/adm5120/reset.c | 62 ---- .../adm5120-2.6/files/arch/mips/adm5120/setup.c | 73 ----- .../adm5120-2.6/files/arch/mips/adm5120/time.c | 54 ---- .../adm5120-2.6/files/arch/mips/adm5120/trxsplit.c | 208 ------------ .../files/arch/mips/pci/fixup-adm5120.c | 175 ---------- .../adm5120-2.6/files/arch/mips/pci/ops-adm5120.c | 143 --------- .../adm5120-2.6/files/arch/mips/pci/pci-adm5120.c | 80 ----- 32 files changed, 3910 deletions(-) delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c (limited to 'target/linux/adm5120-2.6/files/arch/mips') diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig deleted file mode 100644 index 7738d8175..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -if MIPS_ADM5120 - -menu "ADM5120 Implementation Options" - -config ADM5120_CPU_OVERRIDES - bool "Enable CPU feature overrides" - default y - -config PCI_ADM5120 - bool "Enable PCI support" - select PCI - default y - -endmenu - -config ARM_AMBA - bool - default y - -endif diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile deleted file mode 100644 index bb0a7c8b0..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel -# - -obj-y := setup.o prom.o irq.o memory.o adm5120_info.o -obj-y += board.o -obj-y += clock.o -obj-y += gpio.o -obj-y += platform.o -obj-y += reset.o -obj-y += time.o - -obj-y += trxsplit.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c deleted file mode 100644 index e2ee5ca56..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -unsigned int adm5120_product_code; -unsigned int adm5120_revision; -unsigned int adm5120_package; -unsigned int adm5120_nand_boot; -unsigned long adm5120_speed; - -#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -/* - * CPU settings detection - */ -#define CODE_GET_PC(c) ((c) & CODE_PC_MASK) -#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK) -#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK) -#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK) -#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0) - -void adm5120_ndelay(u32 ns) -{ - u32 t; - - SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); - SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); - - t = (ns+640) / 640; - t &= TIMER_PERIOD_MASK; - SWITCH_WRITE(SWITCH_REG_TIMER, t | TIMER_TE); - - /* wait until the timer expires */ - do { - t = SWITCH_READ(SWITCH_REG_TIMER_INT); - } while ((t & TIMER_INT_TOS) == 0); - - /* leave the timer disabled */ - SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); - SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); -} - -void __init adm5120_soc_init(void) -{ - u32 code; - u32 clks; - - code = SWITCH_READ(SWITCH_REG_CODE); - - adm5120_product_code = CODE_GET_PC(code); - adm5120_revision = CODE_GET_REV(code); - adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ? - ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP; - adm5120_nand_boot = CODE_GET_NAB(code); - - clks = CODE_GET_CLKS(code); - adm5120_speed = ADM5120_SPEED_175; - if (clks & 1) - adm5120_speed += 25000000; - if (clks & 2) - adm5120_speed += 50000000; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c deleted file mode 100644 index 74bacaa2e..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * $Id$ - * - * ADM5120 generic board code - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -static LIST_HEAD(adm5120_boards); -static char adm5120_board_name[ADM5120_BOARD_NAMELEN]; - -const char *get_system_type(void) -{ - return adm5120_board_name; -} - -static struct adm5120_board * __init adm5120_board_find(unsigned long machtype) -{ - struct list_head *this; - struct adm5120_board *board; - void *ret; - - ret = NULL; - list_for_each(this, &adm5120_boards) { - board = list_entry(this, struct adm5120_board, list); - if (board->mach_type == machtype) { - ret = board; - break; - } - } - - return ret; -} - -static int __init adm5120_board_setup(void) -{ - struct adm5120_board *board; - int err; - - board = adm5120_board_find(mips_machtype); - if (board == NULL) { - printk(KERN_ALERT "adm5120: no board registered for machtype %lu" - ", trying generic\n", mips_machtype); - board = adm5120_board_find(MACH_ADM5120_GENERIC); - if (board == NULL) - panic("adm5120: unsupported board\n"); - } - - printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name); - - memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN); - - adm5120_board_reset = board->board_reset; - if (board->eth_num_ports > 0) - adm5120_eth_num_ports = board->eth_num_ports; - - if (board->eth_vlans) - memcpy(adm5120_eth_vlans, board->eth_vlans, - sizeof(adm5120_eth_vlans)); - - - if (board->board_setup) - board->board_setup(); - - /* register UARTs */ - amba_device_register(&adm5120_uart0_device, &iomem_resource); - amba_device_register(&adm5120_uart1_device, &iomem_resource); - - /* register PCI controller */ - if (adm5120_package_bga()) - platform_device_register(&adm5120_pci_device); - - /* register board devices */ - if (board->num_devices > 0 && board->devices != NULL ) { - err = platform_add_devices(board->devices, board->num_devices); - if (err) - printk(KERN_ALERT "adm5120: adding board devices failed\n"); - } - - return 0; -} - -void __init adm5120_board_register(struct adm5120_board *board) -{ - list_add(&board->list, &adm5120_boards); - printk(KERN_INFO "adm5120: registered board '%s'\n", board->name); -} - -void __init adm5120_register_boards(struct adm5120_board **boards, - int num) -{ - int i; - - for (i=0; i - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition cas6xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs1", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "nvfs2", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition cas7xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs", - .offset = MTDPART_OFS_APPEND, - .size = 128*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *cas6xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *cas7xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init cas6xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; - - /* TODO: setup mac address */ -} - -static void __init cas7xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); - adm5120_flash0_data.parts = cas7xx_partitions; - - /* TODO: setup mac address */ -} - -static struct adm5120_board cas630_board __initdata = { - .mach_type = MACH_ADM5120_CAS630, - .name = "Cellvision CAS-630/630W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas670_board __initdata = { - .mach_type = MACH_ADM5120_CAS670, - .name = "Cellvision CAS-670/670W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas700_board __initdata = { - .mach_type = MACH_ADM5120_CAS700, - .name = "Cellvision CAS-700/700W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas771_board __initdata = { - .mach_type = MACH_ADM5120_CAS771, - .name = "Cellvision CAS-771/771W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas790_board __initdata = { - .mach_type = MACH_ADM5120_CAS790, - .name = "Cellvision CAS-790", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas861_board __initdata = { - .mach_type = MACH_ADM5120_CAS861, - .name = "Cellvision CAS-861/861W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&cas630_board); - adm5120_board_register(&cas670_board); - adm5120_board_register(&cas700_board); - adm5120_board_register(&cas771_board); - adm5120_board_register(&cas790_board); - adm5120_board_register(&cas861_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c deleted file mode 100644 index 620179744..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * $Id$ - * - * Compex boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static void wp54_reset(void) -{ - gpio_set_value(ADM5120_GPIO_PIN3, 0); -} - -static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", - .offset = 0, - .size = 0x050000, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = 0x3A0000, - } , { - .name = "nvram", - .offset = MTDPART_OFS_APPEND, - .size = 0x010000, - } -}; - -static struct platform_device *np2xg_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static struct platform_device *wp54_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init np2xg_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_wrt_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); - adm5120_flash0_data.parts = wp54g_wrt_partitions; - - /* TODO: setup mac address */ -} - -unsigned char np27g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -unsigned char np28g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x00, 0x00 -}; - -unsigned char wp54_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x00, 0x00, 0x00, 0x00 -}; - -static struct adm5120_board np27g_board __initdata = { - .mach_type = MACH_ADM5120_NP27G, - .name = "Compex NetPassage 27G", - .board_setup = np2xg_setup, - .eth_num_ports = 5, - .eth_vlans = np27g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board np28g_board __initdata = { - .mach_type = MACH_ADM5120_NP28G, - .name = "Compex NetPassage 28G", - .board_setup = np2xg_setup, - .eth_num_ports = 4, - .eth_vlans = np28g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board wp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WP54AG, - .name = "Compex WP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_wrt_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G-WRT", - .board_setup = wp54_wrt_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WPP54AG, - .name = "Compex WPP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54g_board __initdata = { - .mach_type = MACH_ADM5120_WPP54G, - .name = "Compex WPP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&np27g_board); - adm5120_board_register(&np28g_board); - adm5120_board_register(&wp54ag_board); - adm5120_board_register(&wp54g_board); - adm5120_board_register(&wp54g_wrt_board); - adm5120_board_register(&wpp54ag_board); - adm5120_board_register(&wpp54g_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c deleted file mode 100644 index a184cbce4..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * $Id$ - * - * Edimax boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct mtd_partition br6104k_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *br6104k_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init br6104k_setup(void) { - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions); - adm5120_flash0_data.parts = br6104k_partitions; - - /* TODO: setup mac addresses, if possible */ -} - -unsigned char br6104k_vlans[6] = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -static struct adm5120_board br6104k_board __initdata = { - .mach_type = MACH_ADM5120_BR6104K, - .name = "Edimax BR-6104K", - .board_setup = br6104k_setup, - .eth_num_ports = 5, - .eth_vlans = br6104k_vlans, - .num_devices = ARRAY_SIZE(br6104k_devices), - .devices = br6104k_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&br6104k_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c deleted file mode 100644 index de78ca40e..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * $Id$ - * - * Generic ADM5120 based board - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct platform_device *generic_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct adm5120_board generic_board __initdata = { - .mach_type = MACH_ADM5120_GENERIC, - .name = "Generic ADM5120 board", - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(generic_devices), - .devices = generic_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&generic_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c deleted file mode 100644 index ebeb5aa87..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * $Id$ - * - * Infineon boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio3(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN3, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN3, 1); - break; - } -} - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "boardcfg", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *easy5120pata_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy5120rt_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device -}; - -static struct platform_device *easy5120wvoip_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy83000_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINAX device? */ -}; - -static void __init easy_setup_pqfp(void) -{ - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static void __init easy_setup_bga(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static struct adm5120_board easy5120pata_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120PATA, - .name = "Infineon EASY 5120P-ATA Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120pata_devices), - .devices = easy5120pata_devices, -}; - -static struct adm5120_board easy5120rt_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120RT, - .name = "Infineon EASY 5120-RT Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 5, - .num_devices = ARRAY_SIZE(easy5120rt_devices), - .devices = easy5120rt_devices, -}; - -static struct adm5120_board easy5120wvoip_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120WVOIP, - .name = "Infineon EASY 5120-WVoIP Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120wvoip_devices), - .devices = easy5120wvoip_devices, -}; - -static struct adm5120_board easy83000_board __initdata = { - .mach_type = MACH_ADM5120_EASY83000, - .name = "Infineon EASY 83000 Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy83000_devices), - .devices = easy83000_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&easy5120pata_board); - adm5120_board_register(&easy5120rt_board); - adm5120_board_register(&easy5120wvoip_board); - adm5120_board_register(&easy83000_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c deleted file mode 100644 index f233772d0..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * $Id$ - * - * Mikrotik RouterBOARDs 111/112/133/133C/150/153 - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct mtd_partition rb1xx_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *rb1xx_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_nand_device, -}; - -static struct platform_device *rb150_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: nand device is not yet supported */ -}; - -static void __init rb1xx_setup(void) -{ - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); - adm5120_flash0_data.parts = rb1xx_partitions; - - /* TODO: setup mac address */ -} - -#if 0 -/* - * RB1xx boards have bad network performance with the default VLAN matrixes. - * Disable it while the ethernet driver gets fixed. - */ -static unsigned char rb11x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x42, 0x41, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133c_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb15x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; -#else -static unsigned char rb_vlans[6] __initdata = { - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 -}; -#define rb11x_vlans rb_vlans -#define rb133_vlans rb_vlans -#define rb133c_vlans rb_vlans -#define rb15x_vlans rb_vlans -#endif - -static struct adm5120_board rb111_board __initdata = { - .mach_type = MACH_ADM5120_RB_111, - .name = "Mikrotik RouterBOARD 111", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb112_board __initdata = { - .mach_type = MACH_ADM5120_RB_112, - .name = "Mikrotik RouterBOARD 112", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133_board __initdata = { - .mach_type = MACH_ADM5120_RB_133, - .name = "Mikrotik RouterBOARD 133", - .board_setup = rb1xx_setup, - .eth_num_ports = 3, - .eth_vlans = rb133_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133c_board __initdata = { - .mach_type = MACH_ADM5120_RB_133C, - .name = "Mikrotik RouterBOARD 133C", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb133c_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb150_board __initdata = { - .mach_type = MACH_ADM5120_RB_150, - .name = "Mikrotik RouterBOARD 150", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb150_devices), - .devices = rb150_devices, -}; - -static struct adm5120_board rb153_board __initdata = { - .mach_type = MACH_ADM5120_RB_153, - .name = "Mikrotik RouterBOARD 153", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&rb111_board); - adm5120_board_register(&rb112_board); - adm5120_board_register(&rb133_board); - adm5120_board_register(&rb133c_board); - adm5120_board_register(&rb150_board); - adm5120_board_register(&rb153_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c deleted file mode 100644 index 0a60205eb..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * $Id$ - * - * ZyXEL Prestige P-334/P-335 boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition p33x_partitions[] = { - { - .name = "bootbase", - .offset = 0, - .size = 16*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "rom", - .offset = MTDPART_OFS_APPEND, - .size = 16*1024, - } , { - .name = "bootext", - .offset = MTDPART_OFS_APPEND, - .size = 96*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } , { - .name = "firmware", - .offset = 32*1024, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *p334_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *p335_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static void __init p33x_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); - adm5120_flash0_data.parts = p33x_partitions; - - /* TODO: setup mac address */ -} - -unsigned char p33x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x50, 0x48, 0x44, 0x42, 0x41, 0x00 -}; - -static struct adm5120_board p334wt_board __initdata = { - .mach_type = MACH_ADM5120_P334WT, - .name = "ZyXEL Prestige 334WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p334_devices), - .devices = p334_devices, -}; - -static struct adm5120_board p335_board __initdata = { - .mach_type = MACH_ADM5120_P335, - .name = "ZyXEL Prestige 335/335WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p335_devices), - .devices = p335_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&p334wt_board); - adm5120_board_register(&p335_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c deleted file mode 100644 index 4a8b69b4c..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * $Id$ - * - * ADM5120 minimal CLK API implementation - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on the CLK API implementation in: - * arch/mips/tx4938/toshiba_rbtx4938/setup.c - * Copyright (C) 2000-2001 Toshiba Corporation - * 2003-2005 (c) MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -struct clk { - unsigned long rate; -}; - -static struct clk uart_clk = { - .rate = ADM5120_UART_CLOCK -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "UARTCLK")) - return &uart_clk; - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c deleted file mode 100644 index d073b659a..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * $Id$ - * - * ADM5120 GPIO support - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -typedef void __iomem * gpio_reg_t; -#define GPIO_READ(r) readl((r)) -#define GPIO_WRITE(v,r) writel((v),(r)) -#define GPIO_REG(r) (gpio_reg_t)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r) - -struct adm5120_gpio_line { - u32 flags; - const char *label; -}; - -#define GPIO_FLAG_VALID 0x01 -#define GPIO_FLAG_USED 0x02 - -struct led_desc { - gpio_reg_t reg; /* LED register address */ - u8 iv_shift; /* shift amount for input bit */ - u8 mode_shift; /* shift amount for mode bits */ -}; - -#define LED_DESC(_port,_led) { \ - .reg = GPIO_REG(SWITCH_REG_PORT0_LED+_port*4), \ - .iv_shift = LED0_IV_SHIFT+_led, \ - .mode_shift = _led*4 \ - } - -static struct led_desc led_table[15] = { - LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2), - LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2), - LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2), - LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2), - LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2) -}; - -static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT] = { - [ADM5120_GPIO_PIN0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN3] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN4] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN5] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN6] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN7] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L2] = {.flags = GPIO_FLAG_VALID} -}; - -#define gpio_is_invalid(g) ( \ - (g) > ADM5120_GPIO_MAX || \ - ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_VALID) == 0) \ - ) - -#define gpio_is_used(g) ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_USED) != 0) - -/* - * Helpers for GPIO lines in GPIO_CONF0 register - */ -#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p) -#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p) -#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p) -#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p) - -static inline int pins_direction_input(unsigned pin) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - t &= ~(PIN_OE(pin)); - t |= PIN_IM(pin); - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int pins_direction_output(unsigned pin, int value) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - t &= ~(PIN_IM(pin) | PIN_OV(pin)); - t |= PIN_OE(pin); - - if (value) - t |= PIN_OV(pin); - - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int pins_get_value(unsigned pin) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - if ((t & PIN_IM(pin)) != 0) - t &= PIN_IV(pin); - else - t &= PIN_OV(pin); - - return (t) ? 1 : 0; -} - -static inline void pins_set_value(unsigned pin, int value) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - if (value == 0) - t &= ~(PIN_OV(pin)); - else - t |= PIN_OV(pin); - - GPIO_WRITE(t,reg); -} - -/* - * Helpers for GPIO lines in PORTx_LED registers - */ -static inline int leds_direction_input(unsigned led) -{ - gpio_reg_t *reg; - u32 t; - - reg = led_table[led].reg; - t = GPIO_READ(reg); - t &= ~(LED_MODE_MASK << led_table[led].mode_shift); - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int leds_direction_output(unsigned led, int value) -{ - gpio_reg_t *reg; - u32 t, s; - - reg = led_table[led].reg; - s = led_table[led].mode_shift; - - t = GPIO_READ(reg); - t &= ~(LED_MODE_MASK << s); - - switch (value) { - case ADM5120_GPIO_LOW: - t |= (LED_MODE_OUT_LOW << s); - break; - case ADM5120_GPIO_FLASH: - case ADM5120_GPIO_LINK: - case ADM5120_GPIO_SPEED: - case ADM5120_GPIO_DUPLEX: - case ADM5120_GPIO_ACT: - case ADM5120_GPIO_COLL: - case ADM5120_GPIO_LINK_ACT: - case ADM5120_GPIO_DUPLEX_COLL: - case ADM5120_GPIO_10M_ACT: - case ADM5120_GPIO_100M_ACT: - t |= ((value & LED_MODE_MASK) << s); - break; - default: - t |= (LED_MODE_OUT_HIGH << s); - break; - } - - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int leds_get_value(unsigned led) -{ - gpio_reg_t *reg; - u32 t, m; - - reg = led_table[led].reg; - - t = GPIO_READ(reg); - m = (t >> led_table[led].mode_shift) & LED_MODE_MASK; - if (m == LED_MODE_INPUT) - return (t >> led_table[led].iv_shift) & 1; - - if (m == LED_MODE_OUT_LOW) - return 0; - - return 1; -} - -/* - * Main GPIO support routines - */ -int adm5120_gpio_direction_input(unsigned gpio) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio < ADM5120_GPIO_P0L0) - return pins_direction_input(gpio); - - gpio -= ADM5120_GPIO_P0L0; - return leds_direction_input(gpio); -} - -int adm5120_gpio_direction_output(unsigned gpio, int value) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio < ADM5120_GPIO_P0L0) - return pins_direction_output(gpio, value); - - gpio -= ADM5120_GPIO_P0L0; - return leds_direction_output(gpio, value); -} - -int adm5120_gpio_get_value(unsigned gpio) -{ - if (gpio < ADM5120_GPIO_P0L0) - return pins_get_value(gpio); - - gpio -= ADM5120_GPIO_P0L0; - return leds_get_value(gpio); -} - -void adm5120_gpio_set_value(unsigned gpio, int value) -{ - if (gpio < ADM5120_GPIO_P0L0) { - pins_set_value(gpio, value); - return; - } - - gpio -= ADM5120_GPIO_P0L0; - leds_direction_output(gpio, value); -} - -int adm5120_gpio_request(unsigned gpio, const char *label) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio_is_used(gpio)) - return -EBUSY; - - adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED; - adm5120_gpio_map[gpio].label = label; - - return 0; -} - -void adm5120_gpio_free(unsigned gpio) -{ - if (gpio_is_invalid(gpio)) - return; - - adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED; - adm5120_gpio_map[gpio].label = NULL; -} - -int adm5120_gpio_to_irq(unsigned gpio) -{ - /* FIXME: not yet implemented */ - return -EINVAL; -} - -int adm5120_irq_to_gpio(unsigned irq) -{ - /* FIXME: not yet implemented */ - return -EINVAL; -} - -static int __init adm5120_gpio_init(void) -{ - int i; - - if (adm5120_package_pqfp()) { - /* GPIO pins 4-7 are unavailable in ADM5120P */ - for (i=ADM5120_GPIO_PIN4; i<=ADM5120_GPIO_PIN7; i++) - adm5120_gpio_map[i].flags &= ~GPIO_FLAG_VALID; - } - - return 0; -} - -pure_initcall(adm5120_gpio_init); - -EXPORT_SYMBOL(adm5120_gpio_direction_output); -EXPORT_SYMBOL(adm5120_gpio_direction_input); -EXPORT_SYMBOL(adm5120_gpio_get_value); -EXPORT_SYMBOL(adm5120_gpio_set_value); -EXPORT_SYMBOL(adm5120_gpio_request); -EXPORT_SYMBOL(adm5120_gpio_free); -EXPORT_SYMBOL(adm5120_gpio_to_irq); -EXPORT_SYMBOL(adm5120_irq_to_gpio); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c deleted file mode 100644 index 8d6fbe6a3..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific interrupt handlers - * - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#define INTC_REG(r) (*(volatile u32 *)(KSEG1ADDR(ADM5120_INTC_BASE) + r)) - -static void adm5120_intc_irq_unmask(unsigned int irq); -static void adm5120_intc_irq_mask(unsigned int irq); -static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type); - -static struct irq_chip adm5120_intc_irq_chip = { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - .name = "INTC", -#else - .typename = "INTC", -#endif - .unmask = adm5120_intc_irq_unmask, - .mask = adm5120_intc_irq_mask, - .mask_ack = adm5120_intc_irq_mask, - .set_type = adm5120_intc_irq_set_type -}; - -static struct irqaction adm5120_intc_irq_action = { - .handler = no_action, - .name = "cascade [INTC]" -}; - -static void adm5120_intc_irq_unmask(unsigned int irq) -{ - unsigned long flags; - - irq -= ADM5120_INTC_IRQ_BASE; - local_irq_save(flags); - INTC_REG(INTC_REG_IRQ_ENABLE) = (1 << irq); - local_irq_restore(flags); -} - -static void adm5120_intc_irq_mask(unsigned int irq) -{ - unsigned long flags; - - irq -= ADM5120_INTC_IRQ_BASE; - local_irq_save(flags); - INTC_REG(INTC_REG_IRQ_DISABLE) = (1 << irq); - local_irq_restore(flags); -} - -static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type) -{ - /* TODO: not yet tested */ -#if 1 - unsigned int sense; - unsigned long mode; - int err; - - err = 0; - sense = flow_type & (IRQ_TYPE_SENSE_MASK); - switch (sense) { - case IRQ_TYPE_NONE: - case IRQ_TYPE_LEVEL_HIGH: - break; - case IRQ_TYPE_LEVEL_LOW: - switch (irq) { - case ADM5120_IRQ_GPIO2: - case ADM5120_IRQ_GPIO4: - break; - default: - err = -EINVAL; - break; - } - break; - default: - err = -EINVAL; - break; - } - - if (err) - return err; - - switch (irq) { - case ADM5120_IRQ_GPIO2: - case ADM5120_IRQ_GPIO4: - mode = INTC_REG(INTC_REG_INT_MODE); - if (sense == IRQ_TYPE_LEVEL_LOW) - mode |= (1 << (irq-ADM5120_INTC_IRQ_BASE)); - else - mode &= (1 << (irq-ADM5120_INTC_IRQ_BASE)); - - INTC_REG(INTC_REG_INT_MODE) = mode; - /* fallthrogh */ - default: - irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[irq].status |= sense; - break; - } -#endif - return 0; -} - -static void adm5120_intc_irq_dispatch(void) -{ - unsigned long status; - int irq; - -#if 1 - /* dispatch only one IRQ at a time */ - status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; - - if (status) { - irq = ADM5120_INTC_IRQ_BASE+fls(status)-1; - do_IRQ(irq); - } else - spurious_interrupt(); -#else - status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; - if (status) { - for (irq=ADM5120_INTC_IRQ_BASE; irq <= ADM5120_INTC_IRQ_BASE + - INTC_IRQ_LAST; irq++, status >>=1) { - if ((status & 1) == 1) - do_IRQ(irq); - } - } else - spurious_interrupt(); -#endif -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause(); - - if (pending & STATUSF_IP7) - do_IRQ(ADM5120_IRQ_COUNTER); - else if (pending & STATUSF_IP2) - adm5120_intc_irq_dispatch(); - else - spurious_interrupt(); -} - -#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED) -static void __init adm5120_intc_irq_init(int base) -{ - int i; - - /* disable all interrupts */ - INTC_REG(INTC_REG_IRQ_DISABLE) = INTC_INT_ALL; - /* setup all interrupts to generate IRQ instead of FIQ */ - INTC_REG(INTC_REG_INT_MODE) = 0; - /* set active level for all external interrupts to HIGH */ - INTC_REG(INTC_REG_INT_LEVEL) = 0; - /* disable usage of the TEST_SOURCE register */ - INTC_REG(INTC_REG_IRQ_SOURCE_SELECT) = 0; - - for(i=ADM5120_INTC_IRQ_BASE; i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST; - i++) { - irq_desc[i].status = INTC_IRQ_STATUS; - set_irq_chip_and_handler(i, &adm5120_intc_irq_chip, - handle_level_irq); - } - - setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action); -} - -void __init arch_init_irq(void) { - mips_cpu_irq_init(); - adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c deleted file mode 100644 index 1bde6b02d..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -#if 1 -# define mem_dbg(f, a...) printk("mem_detect: " f, ## a) -#else -# define mem_dbg(f, a...) -#endif - -#define MEM_WR_DELAY 10000 /* 0.01 usec */ - -unsigned long adm5120_memsize; - -static int __init mem_check_pattern(u8 *addr, unsigned long offs) -{ - volatile u32 *p1 = (volatile u32 *)addr; - volatile u32 *p2 = (volatile u32 *)(addr+offs); - u32 t,u,v; - - /* save original value */ - t = *p1; - u = *p2; - - if (t != u) - return 0; - - v = 0x55555555; - if (u == v) - v = 0xAAAAAAAA; - - mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1); - - *p1 = v; - mem_dbg("delay %d ns\n", MEM_WR_DELAY); - adm5120_ndelay(MEM_WR_DELAY); - u = *p2; - - mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u); - - /* restore original value */ - *p1 = t; - - return (v == u); -} - -static void __init adm5120_detect_memsize(void) -{ - u32 memctrl; - u32 size, maxsize; - u8 *p; - - memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL); - switch (memctrl & MEMCTRL_SDRS_MASK) { - case MEMCTRL_SDRS_4M: - maxsize = 4 << 20; - break; - case MEMCTRL_SDRS_8M: - maxsize = 8 << 20; - break; - case MEMCTRL_SDRS_16M: - maxsize = 16 << 20; - break; - default: - maxsize = 64 << 20; - break; - } - - /* disable buffers for both SDRAM banks */ - mem_dbg("disable buffers for both banks\n"); - MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE); - MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE); - - mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20); - - /* detect size of the 1st SDRAM bank */ - p = (u8 *)KSEG1ADDR(0); - for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) { - if (mem_check_pattern(p, size)) { - /* mirrored address */ - mem_dbg("mirrored data found at offset 0x%08X\n", size); - break; - } - } - - mem_dbg("chip size in 1st bank is %uMB\n", size >> 20); - adm5120_memsize = size; - - if (size != maxsize) - /* 2nd bank is not supported */ - goto out; - - if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0) - /* 2nd bank is disabled */ - goto out; - - /* - * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip - * are missing. - */ - mem_dbg("check presence of 2nd bank\n"); - - p = (u8 *)KSEG1ADDR(maxsize+size-4); - if (mem_check_pattern(p, 0)) { - adm5120_memsize += size; - } - - if (maxsize != size) { - /* adjusting MECTRL register */ - memctrl &= ~(MEMCTRL_SDRS_MASK); - switch (size>>20) { - case 4: - memctrl |= MEMCTRL_SDRS_4M; - break; - case 8: - memctrl |= MEMCTRL_SDRS_8M; - break; - case 16: - memctrl |= MEMCTRL_SDRS_16M; - break; - default: - memctrl |= MEMCTRL_SDRS_64M; - break; - } - SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl); - } - -out: - /* reenable buffer for both SDRAM banks */ - mem_dbg("enable buffers for both banks\n"); - MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE); - MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE); - - mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 , - size >>20); -} - -void __init adm5120_mem_init(void) -{ - adm5120_detect_memsize(); - add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c deleted file mode 100644 index a79893d54..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * $Id$ - * - * Generic ADM5120 platform devices - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, - unsigned int mctrl); - -#if 1 -/* - * TODO:remove global adm5120_eth* variables when the switch driver will be - * converted into a real platform driver - */ -unsigned int adm5120_eth_num_ports = 6; -EXPORT_SYMBOL_GPL(adm5120_eth_num_ports); - -unsigned char adm5120_eth_macs[6][6] = { - {'\00', 'A', 'D', 'M', '\x51', '\x20' }, - {'\00', 'A', 'D', 'M', '\x51', '\x21' }, - {'\00', 'A', 'D', 'M', '\x51', '\x22' }, - {'\00', 'A', 'D', 'M', '\x51', '\x23' }, - {'\00', 'A', 'D', 'M', '\x51', '\x24' }, - {'\00', 'A', 'D', 'M', '\x51', '\x25' } -}; -EXPORT_SYMBOL_GPL(adm5120_eth_macs); - -unsigned char adm5120_eth_vlans[6] = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x60 -}; -EXPORT_SYMBOL_GPL(adm5120_eth_vlans); - -#else -/* Built-in ethernet switch */ -struct adm5120_switch_platform_data adm5120_switch_data; -struct platform_device adm5120_switch_device = { - .name = "adm5120-switch", - .id = -1, - .dev.platform_data = &adm5120_switch_data, -}; -#endif - -/* PCI Host Controller */ -struct adm5120_pci_platform_data adm5120_pci_data; -struct platform_device adm5120_pci_device = { - .name = "adm5120-pci", - .id = -1, - .dev.platform_data = &adm5120_pci_data, -}; - -/* USB Host Controller */ -struct resource adm5120_usbc_resources[] = { - [0] = { - .start = ADM5120_USBC_BASE, - .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = ADM5120_IRQ_USBC, - .end = ADM5120_IRQ_USBC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device adm5120_usbc_device = { - .name = "adm5120-hcd", - .id = -1, - .num_resources = ARRAY_SIZE(adm5120_usbc_resources), - .resource = adm5120_usbc_resources, -}; - -/* NOR flash 0 */ -struct adm5120_flash_platform_data adm5120_flash0_data; -struct platform_device adm5120_flash0_device = { - .name = "adm5120-flash", - .id = 0, - .dev.platform_data = &adm5120_flash0_data, -}; - -/* NOR flash 1 */ -struct adm5120_flash_platform_data adm5120_flash1_data; -struct platform_device adm5120_flash1_device = { - .name = "adm5120-flash", - .id = 1, - .dev.platform_data = &adm5120_flash1_data, -}; - -/* NAND flash */ -struct resource adm5120_nand_resource[] = { - [0] = { - .start = ADM5120_SRAM1_BASE, - .end = ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1, - .flags = IORESOURCE_MEM, - }, -}; - -struct adm5120_nand_platform_data adm5120_nand_data; - -struct platform_device adm5120_nand_device = { - .name = "adm5120-nand", - .id = -1, - .dev.platform_data = &adm5120_nand_data, - .num_resources = ARRAY_SIZE(adm5120_nand_resource), - .resource = adm5120_nand_resource, -}; - -/* built-in UARTs */ -struct amba_pl010_data adm5120_uart0_data = { - .set_mctrl = adm5120_uart_set_mctrl -}; - -struct amba_device adm5120_uart0_device = { - .dev = { - .bus_id = "APB:UART0", - .platform_data = &adm5120_uart0_data, - }, - .res = { - .start = ADM5120_UART0_BASE, - .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { ADM5120_IRQ_UART0, -1 }, - .periphid = 0x0041010, -}; - -struct amba_pl010_data adm5120_uart1_data = { - .set_mctrl = adm5120_uart_set_mctrl -}; - -struct amba_device adm5120_uart1_device = { - .dev = { - .bus_id = "APB:UART1", - .platform_data = &adm5120_uart1_data, - }, - .res = { - .start = ADM5120_UART1_BASE, - .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { ADM5120_IRQ_UART1, -1 }, - .periphid = 0x0041010, -}; - -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, - unsigned int mctrl) -{ -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c deleted file mode 100644 index 2187477d0..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC; - -struct board_desc { - unsigned long mach_type; - char *name; -}; - -#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)} -static struct board_desc common_boards[] __initdata = { - /* Cellvision/SparkLAN boards */ - DEFBOARD("CAS-630", MACH_ADM5120_CAS630), - DEFBOARD("CAS-670", MACH_ADM5120_CAS670), - DEFBOARD("CAS-771", MACH_ADM5120_CAS771), - DEFBOARD("CAS-790", MACH_ADM5120_CAS790), - DEFBOARD("CAS-861", MACH_ADM5120_CAS861), - /* Compex boards */ - DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT), - /* Edimax boards */ - DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K), - DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104K), - /* Infineon boards */ - DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA), - DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT), - DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP), - DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000), - /* Mikrotik RouterBOARDs */ - DEFBOARD("111", MACH_ADM5120_RB_111), - DEFBOARD("112", MACH_ADM5120_RB_112), - DEFBOARD("133", MACH_ADM5120_RB_133), - DEFBOARD("133C", MACH_ADM5120_RB_133C), - DEFBOARD("133C3", MACH_ADM5120_RB_133C), - DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */ - DEFBOARD("153", MACH_ADM5120_RB_153), - DEFBOARD("miniROUTER", MACH_ADM5120_RB_150), -}; - -static unsigned long __init find_machtype_byname(char *name) -{ - unsigned long ret; - int i; - - ret = MACH_ADM5120_GENERIC; - if (name == NULL) - goto out; - - if (*name == '\0') - goto out; - - for (i=0; i 0) strcpy( &(arcs_cmdline[0]), cmd); - else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE); - -} - -#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)) -#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v) - -void __init prom_putchar(char ch) -{ - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); - UART_WRITE(UART_REG_DATA, ch); - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); -} - -void __init prom_init(void) -{ - mips_machgroup = MACH_GROUP_ADM5120; - prom_detect_machtype(); - - prom_init_cmdline(); -} - -void __init prom_free_prom_memory(void) -{ - /* We do not have to prom memory to free */ -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile deleted file mode 100644 index d844b600f..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel -# - -lib-y += bootbase.o -lib-y += cfe.o -lib-y += generic.o -lib-y += myloader.o -lib-y += routerboot.o diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c deleted file mode 100644 index 7ab9d46bd..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * $Id$ - * - * ZyXEL's Bootbase specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include "prom_read.h" - -#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90) -#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000) -#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE) -#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024)) - -static int bootbase_found = 0; -static struct zynos_board_info *board_info; - -struct bootbase_info bootbase_info; - -static inline int bootbase_dbgarea_present(u8 *data) -{ - u32 t; - - t = prom_read_be32(data+5); - if (t != ZYNOS_MAGIC_DBGAREA1) - return 0; - - t = prom_read_be32(data+9); - if (t != ZYNOS_MAGIC_DBGAREA2) - return 0; - - return 1; -} - -static inline u32 bootbase_get_bootext_addr(void) -{ - return prom_read_be32(&board_info->bootext_addr); -} - -static inline u16 bootbase_get_vendor_id(void) -{ -#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0) - unsigned char vendor[ZYNOS_NAME_LEN]; - int i; - - for (i=0; ivendor[i]; - - if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL) - return ZYNOS_VENDOR_ID_ZYXEL; - - if CHECK_VENDOR(ZYNOS_VENDOR_DLINK) - return ZYNOS_VENDOR_ID_DLINK; - - if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT) - return ZYNOS_VENDOR_ID_LUCENT; - - if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR) - return ZYNOS_VENDOR_ID_NETGEAR; - - return ZYNOS_VENDOR_ID_OTHER; -} - -static inline u16 bootbase_get_board_id(void) -{ - return prom_read_be16(&board_info->board_id); -} - -int __init bootbase_present(void) -{ - u32 t; - - if (bootbase_found) - goto out; - - /* check presence of the dbgarea */ - if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0) - goto out; - - board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR); - - /* check for a valid BootExt address */ - t = bootbase_get_bootext_addr(); - if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX)) - goto out; - - bootbase_info.vendor_id = bootbase_get_vendor_id(); - bootbase_info.board_id = bootbase_get_board_id(); - - bootbase_found = 1; - -out: - return bootbase_found; -} - diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c deleted file mode 100644 index 6c03a4e85..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * $Id$ - * - * Broadcom's CFE specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include - -#include -#include - -#include -#include "prom_read.h" - -/* - * CFE based boards - */ -#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE -from other bootloaders */ - -static int cfe_found = 0; - -static u32 cfe_handle; -static u32 cfe_entry; -static u32 cfe_seal; - -int __init cfe_present(void) -{ - /* - * This method only works, when we are booted directly from the CFE. - */ - u32 a1 = (u32) fw_arg1; - - if (cfe_found) - return 1; - - cfe_handle = (u32) fw_arg0; - cfe_entry = (u32) fw_arg2; - cfe_seal = (u32) fw_arg3; - - /* Check for CFE by finding the CFE magic number */ - if (cfe_seal != CFE_EPTSEAL) { - /* We are not booted from CFE */ - return 0; - } - - /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */ - if (a1 != 0) { - return 0; - } - - /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ - if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) { - return 0; - } - - cfe_found = 1; - return 1; -} - -char *cfe_getenv(char *envname) -{ - if (cfe_found == 0) - return NULL; - - return NULL; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c deleted file mode 100644 index 3b5c3bdc0..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * $Id$ - * - * Generic PROM routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include - -#include - -#include - -static int *_prom_argc; -static char **_prom_argv; -static char **_prom_envp; - -char *generic_prom_getenv(char *envname) -{ - char **env; - char *ret; - - ret = NULL; - for (env = _prom_envp; *env != NULL; env++) { - if (strcmp(envname, *env++) == 0) { - ret = *env; - break; - } - } - - return ret; -} - -int generic_prom_present(void) -{ - _prom_argc = (int *)fw_arg0; - _prom_argv = (char **)fw_arg1; - _prom_envp = (char **)fw_arg2; - - return 1; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c deleted file mode 100644 index 8a44509a0..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * $Id$ - * - * Compex's MyLoader specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include "prom_read.h" - -#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000) -#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800) -#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000) - -static int myloader_found = 0; - -struct myloader_info myloader_info; - -int __init myloader_present(void) -{ - struct mylo_system_params *sysp; - struct mylo_board_params *boardp; - struct mylo_partition_table *parts; - - if (myloader_found) - goto out; - - sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR); - boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR); - parts = (struct mylo_partition_table *)(PART_TABLE_ADDR); - - /* Check for some magic numbers */ - if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) || - (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) || - (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)) - goto out; - - myloader_info.vid = le32_to_cpu(sysp->vid); - myloader_info.did = le32_to_cpu(sysp->did); - myloader_info.svid = le32_to_cpu(sysp->svid); - myloader_info.sdid = le32_to_cpu(sysp->sdid); - - myloader_found = 1; - -out: - return myloader_found; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h deleted file mode 100644 index 06e6863fe..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * $Id$ - * - * Generic prom definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_PROM_H_ -#define _ADM5120_PROM_H_ - -/* - * Helper routines - */ -static inline u16 prom_read_le16(void *buf) -{ - u8 *p = buf; - - return ((u16)p[0] + ((u16)p[1] << 8)); -} - -static inline u32 prom_read_le32(void *buf) -{ - u8 *p = buf; - - return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) + - ((u32)p[3] << 24)); -} - -static inline u16 prom_read_be16(void *buf) -{ - u8 *p = buf; - - return (((u16)p[0] << 8) + (u16)p[1]); -} - -static inline u32 prom_read_be32(void *buf) -{ - u8 *p = buf; - - return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) + - ((u32)p[3])); -} - -#endif /* _ADM5120_PROM_H_ */ - - diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c deleted file mode 100644 index 7116f412f..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * $Id$ - * - * Mikrotik's RouterBOOT specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include "prom_read.h" - -static struct rb_hard_settings rb_hs; -static int rb_found = 0; - -static int __init routerboot_load_hs(u8 *buf, u16 buflen) -{ - u16 id,len; - u8 *mac; - int i,j; - - memset(&rb_hs, 0, sizeof(rb_hs)); - - if (buflen < 4) - return -1; - - if (prom_read_le32(buf) != RB_MAGIC_HARD) - return -1; - - /* skip magic value */ - buf += 4; - buflen -= 4; - - while (buflen > 2) { - id = prom_read_le16(buf); - buf += 2; - buflen -= 2; - if (id == RB_ID_TERMINATOR || buflen < 2) - break; - - len = prom_read_le16(buf); - buf += 2; - buflen -= 2; - - if (buflen < len) - break; - - switch (id) { - case RB_ID_BIOS_VERSION: - rb_hs.bios_ver = (char *)buf; - break; - case RB_ID_BOARD_NAME: - rb_hs.name = (char *)buf; - break; - case RB_ID_MEMORY_SIZE: - rb_hs.mem_size = prom_read_le32(buf); - break; - case RB_ID_MAC_ADDRESS_COUNT: - rb_hs.mac_count = prom_read_le32(buf); - break; - case RB_ID_MAC_ADDRESS_PACK: - rb_hs.mac_count = len/RB_MAC_SIZE; - if (rb_hs.mac_count > RB_MAX_MAC_COUNT) - rb_hs.mac_count = RB_MAX_MAC_COUNT; - mac = buf; - for (i=0; i < rb_hs.mac_count; i++) { - for (j=0; j < RB_MAC_SIZE; j++) - rb_hs.macs[i][j] = mac[j]; - mac += RB_MAC_SIZE; - } - break; - } - - buf += len; - buflen -= len; - - } - - return 0; -} - -#define RB_BS_OFFS 0x14 -#define RB_OFFS_MAX (128*1024) - -int __init routerboot_present(void) -{ - struct rb_bios_settings *bs; - u8 *base; - u32 off,len; - - if (rb_found) - goto out; - - base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE); - bs = (struct rb_bios_settings *)(base + RB_BS_OFFS); - - off = prom_read_le32(&bs->hs_offs); - len = prom_read_le32(&bs->hs_size); - if (off > RB_OFFS_MAX) - goto out; - - if (routerboot_load_hs(base+off, len) != 0) - goto out; - - rb_found = 1; - -out: - return rb_found; -} - -char *routerboot_get_boardname(void) -{ - if (rb_found == 0) - return NULL; - - return rb_hs.name; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c deleted file mode 100644 index abcbb1c8b..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific reset routines - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -#define ADM5120_SOFTRESET 0x12000004 - -void (*adm5120_board_reset)(void); - -void adm5120_restart(char *command) -{ - /* TODO: stop switch before reset */ - - if (adm5120_board_reset) - adm5120_board_reset(); - - *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1; -} - -void adm5120_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1); -} - -void adm5120_power_off(void) -{ - adm5120_halt(); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c deleted file mode 100644 index ed7966b41..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific setup - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -static char *prom_names[ADM5120_PROM_LAST+1] __initdata = { - [ADM5120_PROM_GENERIC] = "Generic", - [ADM5120_PROM_CFE] = "CFE", - [ADM5120_PROM_UBOOT] = "U-Boot", - [ADM5120_PROM_MYLOADER] = "MyLoader", - [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT", - [ADM5120_PROM_BOOTBASE] = "Bootbase" -}; - -static void __init adm5120_report(void) -{ - printk(KERN_INFO "SoC : ADM%04X%s revision %d, running at %ldMHz\n", - adm5120_product_code, - (adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P", - adm5120_revision, (adm5120_speed / 1000000) - ); - printk(KERN_INFO "Bootdev : %s flash\n", adm5120_nand_boot ? "NAND":"NOR"); - printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]); -} - -void __init plat_mem_setup(void) -{ - adm5120_soc_init(); - adm5120_mem_init(); - adm5120_report(); - - board_time_init = adm5120_time_init; - - _machine_restart = adm5120_restart; - _machine_halt = adm5120_halt; - pm_power_off = adm5120_power_off; - - set_io_port_base(KSEG1); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c deleted file mode 100644 index 27393d4fe..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific hooks for MIPS CPU Counter/Compare timer - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on: arch/mips/gt64120/wrppmc/time.c - * Original author: Mark.Zhan - * Copyright (C) 1996, 1997, 2004 by Ralf Baechle - * Copyright (C) 2006, Wind River System Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -void __init adm5120_time_init(void) -{ - mips_hpt_frequency = adm5120_speed / 2; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - clear_c0_status(ST0_BEV); - - /* Install ISR for CPU Counter interrupt */ - setup_irq(ADM5120_IRQ_COUNTER, irq); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c deleted file mode 100644 index 941f30695..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#define PFX "trxsplit: " - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 -#define TRX_MAX_LEN 0x3A0000 -#define TRX_NO_HEADER 1 /* Do not write TRX header */ -#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -#define TRX_MAX_OFFSET 3 -#define TRX_MIN_KERNEL_SIZE 256*1024 - -struct trx_header { - u32 magic; /* "HDR0" */ - u32 len; /* Length of file including header */ - u32 crc32; /* 32-bit CRC from flag_version to end of file */ - u32 flag_version; /* 0:15 flags, 16:31 version */ - u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -}; - -#define BLOCK_LEN_MIN 0x10000 - -static struct mtd_info *trx_mtd = NULL; -static unsigned long trx_offset = 0; -static int trx_nr_parts = 0; -static struct mtd_partition trx_parts[TRX_MAX_OFFSET]; -static struct trx_header trx_hdr; - -static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset) -{ - size_t retlen; - int err; - - err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr); - if (err) { - printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name); - goto err_out; - } - - if (retlen != sizeof(trx_hdr)) { - printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name); - goto err_out; - } - - trx_hdr.magic = le32_to_cpu(trx_hdr.magic); - trx_hdr.len = le32_to_cpu(trx_hdr.len); - trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32); - trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version); - trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]); - trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]); - trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]); - - /* sanity checks */ - if (trx_hdr.magic != TRX_MAGIC) - goto err_out; - - if (trx_hdr.len > mtd->size - offset) - goto err_out; - - /* TODO: add crc32 checking too? */ - - return 0; - -err_out: - return -1; -} - -static int __init trxsplit_create_partitions(void) -{ - struct mtd_partition *part = trx_parts; - int ret = 0; - int i; - - if (trx_mtd == NULL) - goto out; - - printk(KERN_INFO PFX "creating TRX partitions in '%s' (%d,%d)\n", - trx_mtd->name, MTD_BLOCK_MAJOR, trx_mtd->index); - - for (i=0; ioffset = trx_offset + trx_hdr.offsets[i]; - trx_nr_parts++; - } - - for (i=0; isize - trx_parts[i].offset; - - i=0; - part = &trx_parts[i]; - if (part->size < TRX_MIN_KERNEL_SIZE) { - part->name = "loader"; - i++; - } - - part = &trx_parts[i]; - part->name = "kernel"; - i++; - - part = &trx_parts[i]; - part->name = "rootfs"; - - ret = add_mtd_partitions(trx_mtd, trx_parts, trx_nr_parts); - if (ret) { - printk(KERN_ALERT PFX "creating TRX partitions failed\n"); - } - -out: - return ret; -} - -static void __init trxsplit_add_mtd(struct mtd_info *mtd) -{ - unsigned long offset; - unsigned long blocklen; - int err; - - if (trx_mtd) - return; - - blocklen = mtd->erasesize; - if (blocklen < BLOCK_LEN_MIN) - blocklen = BLOCK_LEN_MIN; - - printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name); - - err = 0; - for (offset=0; offset < mtd->size; offset+=blocklen) { - err = trxsplit_checktrx(mtd, offset); - if (err == 0) - break; - } - - if (err) { - printk(KERN_ALERT PFX "no TRX header found\n"); - return; - } - - printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset); - - trx_mtd = mtd; - trx_offset = offset; -} - -static void __init trxsplit_remove_mtd(struct mtd_info *mtd) -{ - /* nothing to do */ -} - -static struct mtd_notifier trxsplit_notifier __initdata = { - .add = trxsplit_add_mtd, - .remove = trxsplit_remove_mtd, -}; - -static void __init trxsplit_find_trx(void) -{ - register_mtd_user(&trxsplit_notifier); - unregister_mtd_user(&trxsplit_notifier); -} - -static int __init trxsplit_init(void) -{ - int ret; - - trxsplit_find_trx(); - - ret = trxsplit_create_partitions(); - return ret; -} - -late_initcall(trxsplit_init); diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c deleted file mode 100644 index 59acf75c1..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific PCI fixups - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -struct adm5120_pci_irq { - u8 slot; - u8 func; - u8 pin; - unsigned irq; -}; - -#define PCIIRQ(s,f,p,i) { \ - .slot = (s), \ - .func = (f), \ - .pin = (p), \ - .irq = (i) \ - } - -static struct adm5120_pci_irq default_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -}; - -static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { - PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) -}; - -static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) -}; - -static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1), - PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) -}; - -#define GETMAP(n) do { \ - nr_irqs = ARRAY_SIZE(n ## _pci_irqs); \ - p = n ## _pci_irqs; \ - } while (0) - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - struct adm5120_pci_irq *p; - int nr_irqs; - int i; - int irq; - - irq = -1; - if (slot < 1 || slot > 3) { - printk(KERN_ALERT "PCI: slot number %u is not supported\n", - slot); - goto out; - } - - GETMAP(default); - - switch (mips_machtype) { - case MACH_ADM5120_RB_111: - case MACH_ADM5120_RB_112: - case MACH_ADM5120_RB_133: - case MACH_ADM5120_RB_133C: - case MACH_ADM5120_RB_153: - GETMAP(rb1xx); - break; - case MACH_ADM5120_NP28G: - GETMAP(np28g); - break; - case MACH_ADM5120_P335: - case MACH_ADM5120_P334WT: - /* using default mapping */ - break; - case MACH_ADM5120_CAS771: - GETMAP(cas771); - break; - - case MACH_ADM5120_NP27G: - case MACH_ADM5120_NP28GHS: - case MACH_ADM5120_WP54AG: - case MACH_ADM5120_WP54G: - case MACH_ADM5120_WP54G_WRT: - case MACH_ADM5120_WPP54AG: - case MACH_ADM5120_WPP54G: - default: - printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n"); - break; - } - - for (i=0; islot == slot) && (PCI_FUNC(dev->devfn) == p->func) && - (p->pin == pin)) { - irq = p->irq; - break; - } - } - - if (irq < 0) { - printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n", - pci_name(dev), pin); - } else { - printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n", - pci_name(dev), pin, irq); - } - -out: - return irq; -} - -static void adm5120_pci_fixup(struct pci_dev *dev) -{ - if (dev->devfn != 0) - return; - - /* setup COMMAND register */ - pci_write_config_word(dev, PCI_COMMAND, - (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)); - - /* setup CACHE_LINE_SIZE register */ - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); - - /* setting up BARS */ - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); - pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120, - adm5120_pci_fixup); - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c deleted file mode 100644 index 4a9bc999c..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific PCI operations - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include - -#define DEBUG 0 -#if DEBUG -#define DBG(f, ...) printk(f, ## __VA_ARGS__ ) -#else -#define DBG(f, ...) -#endif - -#define PCI_ENABLE 0x80000000 - -static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED; - -static inline void write_cfgaddr(u32 addr) -{ - *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR) = (addr | PCI_ENABLE); -} - -static inline void write_cfgdata(u32 data) -{ - *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA) = data; - -} - -static inline u32 read_cfgdata(void) -{ - return (*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA)); -} - -static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where) -{ - return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \ - (where & 0xFC)); -} - -static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - u32 data; - - spin_lock_irqsave(&pci_lock, flags); - write_cfgaddr(mkaddr(bus,devfn,where)); - data = read_cfgdata(); - - DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); - - switch (size) { - case 1: - if (where & 1) - data >>= 8; - if (where & 2) - data >>= 16; - data &= 0xFF; - break; - case 2: - if (where & 2) - data >>= 16; - data &= 0xFFFF; - break; - } - - *val = data; - DBG(", 0x%08X returned\n", data); - spin_unlock_irqrestore(&pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - unsigned long flags; - u32 data; - int s; - - spin_lock_irqsave(&pci_lock, flags); - write_cfgaddr(mkaddr(bus,devfn,where)); - data = read_cfgdata(); - - DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); - - switch (size) { - case 1: - s = ((where & 3) << 3); - data &= ~(0xFF << s); - data |= ((val & 0xFF) << s); - break; - case 2: - s = ((where & 2) << 4); - data &= ~(0xFFFF << s); - data |= ((val & 0xFFFF) << s); - break; - case 4: - data = val; - break; - } - - write_cfgdata(data); - DBG(", 0x%08X written\n", data); - spin_unlock_irqrestore(&pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops adm5120_pci_ops = { - .read = pci_config_read, - .write = pci_config_write, -}; diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c deleted file mode 100644 index 2a6477023..000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * $Id$ - * - * ADM5120 PCI Host Controller driver - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ -#include -#include -#include -#include - -#include -#include -#include - -extern struct pci_ops adm5120_pci_ops; - -static struct resource pci_io_resource = { - .name = "ADM5120 PCI I/O", - .start = ADM5120_PCIIO_BASE, - .end = ADM5120_PCICFG_ADDR-1, - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ADM5120 PCI MEM", - .start = ADM5120_PCIMEM_BASE, - .end = ADM5120_PCIIO_BASE-1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller adm5120_controller = { - .pci_ops = &adm5120_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -static int __init adm5120_pci_setup(void) -{ - int pci_bios; - - pci_bios = adm5120_has_pci(); - - printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no "); - if (pci_bios == 0) - return -1; - - /* Avoid ISA compat ranges. */ - PCIBIOS_MIN_IO = 0x00000000; - PCIBIOS_MIN_MEM = 0x00000000; - - /* Set I/O resource limits. */ - ioport_resource.end = 0x1fffffff; - iomem_resource.end = 0xffffffff; - - register_pci_controller(&adm5120_controller); - return 0; -} - -arch_initcall(adm5120_pci_setup); -- cgit v1.2.3