From ef81e099e64abbc5d86875d7281809d7e35e50dc Mon Sep 17 00:00:00 2001
From: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 23 Jan 2009 11:45:38 +0000
Subject: [package] mac80211: update compat-wireless to 2009-01-23

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14154 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 package/mac80211/Makefile                          |   4 +-
 .../301-rt2x00-Implement-support-for-802.11n.patch |   4 +-
 ...02-rt2x00-Implement-support-for-rt2800pci.patch |   1 +
 .../304-rt2x00-Update-copyright-year-to-2009.patch | 319 ----------
 ...conf_tx-only-need-register-access-for-WMM.patch | 116 ----
 .../322-rt2x00-Add-LED_MODE_ASUS-support.patch     |  54 --
 ...2x00-Fix-TX-rate-short-preamble-detection.patch |  51 --
 .../325-rt2x00-rt2x00_rev-should-return-u32.patch  |  25 +
 ...2x00-Update-chipset-ID-handling-rt2800pci.patch |  96 +++
 ...7-rt2x00-Add-support-for-rt3070-rt2800usb.patch | 683 +++++++++++++++++++++
 ...d-support-for-2-firmware-file-lengths-rt2.patch |  58 ++
 .../400-ath9k-restore-ath9k_platform.h.patch       |  31 -
 12 files changed, 867 insertions(+), 575 deletions(-)
 mode change 100755 => 100644 package/mac80211/Makefile
 delete mode 100644 package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch
 delete mode 100644 package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch
 delete mode 100644 package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch
 delete mode 100644 package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch
 create mode 100644 package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch
 create mode 100644 package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch
 create mode 100644 package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch
 create mode 100644 package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch
 delete mode 100644 package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch

(limited to 'package/mac80211')

diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
old mode 100755
new mode 100644
index 8790e5542..bb0512386
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -12,11 +12,11 @@ PKG_NAME:=mac80211
 PKG_RELEASE:=1
 
 ifneq ($(CONFIG_LINUX_2_6_27)$(CONFIG_LINUX_2_6_28),)
-  PKG_VERSION:=2009-01-19
+  PKG_VERSION:=2009-01-23
   PKG_SOURCE_URL:= \
 	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/01 \
 	http://wireless.kernel.org/download/compat-wireless-2.6
-  PKG_MD5SUM:=2d1cc9dacd41cdd56694c030b1865228
+  PKG_MD5SUM:=f4c8df5e077432d7018112849e36f438
 else
   PKG_VERSION:=2008-08-06
   PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08
diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
index a6e76bce3..a21884688 100644
--- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
+++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
@@ -412,13 +412,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  #ifdef CONFIG_RT2X00_LIB_RFKILL
 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c
 +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -325,6 +325,7 @@ static void rt2x00queue_create_tx_descri
+@@ -326,6 +326,7 @@ static void rt2x00queue_create_tx_descri
  	 * Apply TX descriptor handling by components
  	 */
  	rt2x00crypto_create_tx_descriptor(entry, txdesc);
 +	rt2x00ht_create_tx_descriptor(entry, txdesc, rate);
  	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
- 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate);
+ 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
  }
 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h
 +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
index 6df88d1df..ed697bb7e 100644
--- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
+++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
@@ -20,6 +20,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  5 files changed, 4606 insertions(+), 0 deletions(-)
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
+
 --- a/drivers/net/wireless/rt2x00/Makefile
 +++ b/drivers/net/wireless/rt2x00/Makefile
 @@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00u
diff --git a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch b/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch
deleted file mode 100644
index 66eb553ba..000000000
--- a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From 9b9917b3acb758bb72c0e59b3f5b884ad6aec8cd Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 10 Jan 2009 14:03:40 +0100
-Subject: [PATCH] rt2x00: Update copyright year to 2009
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2400pci.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2400pci.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2500pci.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2500pci.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2500usb.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2500usb.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00.h         |    2 +-
- drivers/net/wireless/rt2x00/rt2x00config.c   |    2 +-
- drivers/net/wireless/rt2x00/rt2x00crypto.c   |    2 +-
- drivers/net/wireless/rt2x00/rt2x00debug.c    |    2 +-
- drivers/net/wireless/rt2x00/rt2x00debug.h    |    2 +-
- drivers/net/wireless/rt2x00/rt2x00dev.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00dump.h     |    2 +-
- drivers/net/wireless/rt2x00/rt2x00firmware.c |    2 +-
- drivers/net/wireless/rt2x00/rt2x00leds.c     |    2 +-
- drivers/net/wireless/rt2x00/rt2x00leds.h     |    2 +-
- drivers/net/wireless/rt2x00/rt2x00lib.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00link.c     |    2 +-
- drivers/net/wireless/rt2x00/rt2x00mac.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00pci.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00pci.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00queue.c    |    2 +-
- drivers/net/wireless/rt2x00/rt2x00queue.h    |    2 +-
- drivers/net/wireless/rt2x00/rt2x00reg.h      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00rfkill.c   |    2 +-
- drivers/net/wireless/rt2x00/rt2x00usb.c      |    2 +-
- drivers/net/wireless/rt2x00/rt2x00usb.h      |    2 +-
- drivers/net/wireless/rt2x00/rt61pci.c        |    2 +-
- drivers/net/wireless/rt2x00/rt61pci.h        |    2 +-
- drivers/net/wireless/rt2x00/rt73usb.c        |    2 +-
- drivers/net/wireless/rt2x00/rt73usb.h        |    2 +-
- 31 files changed, 31 insertions(+), 31 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2400pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500usb.h
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00config.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00debug.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00debug.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00dump.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00leds.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00leds.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00link.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00mac.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00reg.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00usb.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt61pci.h
-+++ b/drivers/net/wireless/rt2x00/rt61pci.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/rt2x00/rt73usb.c
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt73usb.h
-+++ b/drivers/net/wireless/rt2x00/rt73usb.h
-@@ -1,5 +1,5 @@
- /*
--	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- 	<http://rt2x00.serialmonkey.com>
- 
- 	This program is free software; you can redistribute it and/or modify
diff --git a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch b/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch
deleted file mode 100644
index c45416518..000000000
--- a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From bbb27190d504b453625d1a663124b2b1cec0fe8b Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 17 Jan 2009 20:25:27 +0100
-Subject: [PATCH] rt2x00: conf_tx() only need register access for WMM queues
-
-conf_tx() in rt61pci and rt73usb only have to check once
-if the queue_idx indicates a non-WMM queue and break of
-the function immediately if that is the case.
-
-Only the WMM queues need to have the TX configuration written
-to the registers.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt61pci.c |   30 +++++++++++++++---------------
- drivers/net/wireless/rt2x00/rt73usb.c |   30 +++++++++++++++---------------
- 2 files changed, 30 insertions(+), 30 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -2657,6 +2657,7 @@ static int rt61pci_conf_tx(struct ieee80
- 	struct rt2x00_field32 field;
- 	int retval;
- 	u32 reg;
-+	u32 offset;
- 
- 	/*
- 	 * First pass the configuration through rt2x00lib, that will
-@@ -2668,24 +2669,23 @@ static int rt61pci_conf_tx(struct ieee80
- 	if (retval)
- 		return retval;
- 
-+	/*
-+	 * We only need to perform additional register initialization
-+	 * for WMM queues/
-+	 */
-+	if (queue_idx >= 4)
-+		return 0;
-+
- 	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
- 
- 	/* Update WMM TXOP register */
--	if (queue_idx < 2) {
--		field.bit_offset = queue_idx * 16;
--		field.bit_mask = 0xffff << field.bit_offset;
--
--		rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
--		rt2x00_set_field32(&reg, field, queue->txop);
--		rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
--	} else if (queue_idx < 4) {
--		field.bit_offset = (queue_idx - 2) * 16;
--		field.bit_mask = 0xffff << field.bit_offset;
--
--		rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
--		rt2x00_set_field32(&reg, field, queue->txop);
--		rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
--	}
-+	offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
-+	field.bit_offset = (queue_idx & 1) * 16;
-+	field.bit_mask = 0xffff << field.bit_offset;
-+
-+	rt2x00pci_register_read(rt2x00dev, offset, &reg);
-+	rt2x00_set_field32(&reg, field, queue->txop);
-+	rt2x00pci_register_write(rt2x00dev, offset, reg);
- 
- 	/* Update WMM registers */
- 	field.bit_offset = queue_idx * 4;
---- a/drivers/net/wireless/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/rt2x00/rt73usb.c
-@@ -2180,6 +2180,7 @@ static int rt73usb_conf_tx(struct ieee80
- 	struct rt2x00_field32 field;
- 	int retval;
- 	u32 reg;
-+	u32 offset;
- 
- 	/*
- 	 * First pass the configuration through rt2x00lib, that will
-@@ -2191,24 +2192,23 @@ static int rt73usb_conf_tx(struct ieee80
- 	if (retval)
- 		return retval;
- 
-+	/*
-+	 * We only need to perform additional register initialization
-+	 * for WMM queues/
-+	 */
-+	if (queue_idx >= 4)
-+		return 0;
-+
- 	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
- 
- 	/* Update WMM TXOP register */
--	if (queue_idx < 2) {
--		field.bit_offset = queue_idx * 16;
--		field.bit_mask = 0xffff << field.bit_offset;
--
--		rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
--		rt2x00_set_field32(&reg, field, queue->txop);
--		rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
--	} else if (queue_idx < 4) {
--		field.bit_offset = (queue_idx - 2) * 16;
--		field.bit_mask = 0xffff << field.bit_offset;
--
--		rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
--		rt2x00_set_field32(&reg, field, queue->txop);
--		rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
--	}
-+	offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
-+	field.bit_offset = (queue_idx & 1) * 16;
-+	field.bit_mask = 0xffff << field.bit_offset;
-+
-+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-+	rt2x00_set_field32(&reg, field, queue->txop);
-+	rt2x00usb_register_write(rt2x00dev, offset, reg);
- 
- 	/* Update WMM registers */
- 	field.bit_offset = queue_idx * 4;
diff --git a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch b/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch
deleted file mode 100644
index c19edd9d4..000000000
--- a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From ac8402781662b40a9f69bc33a3ec20292331e940 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 17 Jan 2009 20:36:44 +0100
-Subject: [PATCH] rt2x00: Add LED_MODE_ASUS support
-
-When the led mode is asus, the activity led mode must
-be registered otherwise the second LED will not be enabled.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2400pci.c |    4 +++-
- drivers/net/wireless/rt2x00/rt2500pci.c |    4 +++-
- drivers/net/wireless/rt2x00/rt2500usb.c |    4 +++-
- 3 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
-@@ -1395,7 +1395,9 @@ static int rt2400pci_init_eeprom(struct 
- 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
- 
- 	rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
--	if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+	if (value == LED_MODE_TXRX_ACTIVITY ||
-+	    value == LED_MODE_DEFAULT ||
-+	    value == LED_MODE_ASUS)
- 		rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
- 				   LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
---- a/drivers/net/wireless/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
-@@ -1552,7 +1552,9 @@ static int rt2500pci_init_eeprom(struct 
- 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
- 
- 	rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
--	if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+	if (value == LED_MODE_TXRX_ACTIVITY ||
-+	    value == LED_MODE_DEFAULT ||
-+	    value == LED_MODE_ASUS)
- 		rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
- 				   LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
---- a/drivers/net/wireless/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
-@@ -1603,7 +1603,9 @@ static int rt2500usb_init_eeprom(struct 
- 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
- 
- 	rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
--	if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+	if (value == LED_MODE_TXRX_ACTIVITY ||
-+	    value == LED_MODE_DEFAULT ||
-+	    value == LED_MODE_ASUS)
- 		rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
- 				   LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
diff --git a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch b/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch
deleted file mode 100644
index 712dea64a..000000000
--- a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 4f9ea5700c714afce77e410d1c0c114c42d5a910 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 18 Jan 2009 20:17:10 +0100
-Subject: [PATCH] rt2x00: Fix TX rate short preamble detection
-
-Mac80211 provides 2 structures to handle bitrates, namely
-ieee80211_rate and ieee80211_tx_rate. To determine the short preamble
-mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE
-must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did).
-
-This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2x00queue.c |    9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -186,10 +186,11 @@ static void rt2x00queue_create_tx_descri
- 
- static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
- 						  struct txentry_desc *txdesc,
--						  struct ieee80211_rate *rate)
-+						  const struct rt2x00_rate *hwrate)
- {
- 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
--	const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value);
-+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
- 	unsigned int data_length;
- 	unsigned int duration;
- 	unsigned int residual;
-@@ -232,7 +233,7 @@ static void rt2x00queue_create_tx_descri
- 		 * When preamble is enabled we should set the
- 		 * preamble bit for the signal.
- 		 */
--		if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-+		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
- 			txdesc->signal |= 0x08;
- 	}
- }
-@@ -327,7 +328,7 @@ static void rt2x00queue_create_tx_descri
- 	rt2x00crypto_create_tx_descriptor(entry, txdesc);
- 	rt2x00ht_create_tx_descriptor(entry, txdesc, rate);
- 	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
--	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate);
-+	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
- }
- 
- static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
diff --git a/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch
new file mode 100644
index 000000000..0a14d9fa5
--- /dev/null
+++ b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch
@@ -0,0 +1,25 @@
+From 3dc31edfe4bad6048f097cd4a088499500db9a2e Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:01:56 +0100
+Subject: [PATCH] rt2x00: rt2x00_rev() should return u32
+
+The "rev" field in chipset definition is an u32,
+which means that rt2x00_rev() which returns that field
+should be of the same type.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2x00.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -878,7 +878,7 @@ static inline char rt2x00_rf(const struc
+ 	return (chipset->rf == chip);
+ }
+ 
+-static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset)
++static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
+ {
+ 	return chipset->rev;
+ }
diff --git a/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch
new file mode 100644
index 000000000..284ba04ff
--- /dev/null
+++ b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch
@@ -0,0 +1,96 @@
+From d2216933a12c38ab23ee1170c1c143002a825046 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:16:08 +0100
+Subject: [PATCH] rt2x00: Update chipset ID handling (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c |   22 ++++++++++++++++------
+ drivers/net/wireless/rt2x00/rt2800pci.h |    8 +++++---
+ 2 files changed, 21 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -984,7 +984,7 @@ static void rt2800pci_reset_tuner(struct
+ static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
+ 				 struct link_qual *qual, const u32 count)
+ {
+-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C)
++	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ 		return;
+ 
+ 	/*
+@@ -1272,7 +1272,11 @@ static int rt2800pci_init_registers(stru
+ 
+ 	rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
++	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
++	else
++		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+ 	rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+@@ -1523,12 +1527,12 @@ static int rt2800pci_init_bbp(struct rt2
+ 	rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
+ 	rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
+ 
+-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) {
++	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ 		rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+ 		rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
+ 	}
+ 
+-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_D)
++	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+ 		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+ 
+ 	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+@@ -1637,6 +1641,11 @@ static int rt2800pci_enable_radio(struct
+ 	/*
+ 	 * Enable RX.
+ 	 */
++	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
++	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
++	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++
+ 	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+ 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+@@ -2253,13 +2262,14 @@ static int rt2800pci_init_eeprom(struct 
+ 			     PCI_CONFIG_HEADER_DEVICE, &device);
+ 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+-	reg = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
+ 	rt2x00_set_chip(rt2x00dev, device, value, reg);
+ 
+ 	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ 	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ 	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+-	    !rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ 		return -ENODEV;
+ 	}
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -47,9 +47,11 @@
+ /*
+  * RT2860 version
+  */
+-#define RT2860_VERSION_C		0x0100
+-#define RT2860_VERSION_D		0x0101
+-#define RT2860_VERSION_E		0x0200
++#define RT2860C_VERSION			0x28600100
++#define RT2860D_VERSION			0x28600101
++#define RT2880E_VERSION			0x28720200
++#define RT2883_VERSION			0x28830300
++#define RT3070_VERSION			0x30700200
+ 
+ /*
+  * Signal information.
diff --git a/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch
new file mode 100644
index 000000000..e92bcd263
--- /dev/null
+++ b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch
@@ -0,0 +1,683 @@
+From 84706fce3026650c49c6290e0e6525b45795027c Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:16:46 +0100
+Subject: [PATCH] rt2x00: Add support for rt3070 (rt2800usb)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800usb.c |  384 +++++++++++++++++++++++++++----
+ drivers/net/wireless/rt2x00/rt2800usb.h |   57 +++++-
+ drivers/net/wireless/rt2x00/rt2x00.h    |    6 +
+ 3 files changed, 404 insertions(+), 43 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+@@ -59,6 +59,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
+  */
+ #define WAIT_FOR_BBP(__dev, __reg) \
+ 	rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+ #define WAIT_FOR_RF(__dev, __reg) \
+ 	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+ #define WAIT_FOR_MCU(__dev, __reg) \
+@@ -120,6 +122,61 @@ static void rt2800usb_bbp_read(struct rt
+ 	mutex_unlock(&rt2x00dev->csr_mutex);
+ }
+ 
++static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++				  const unsigned int word, const u8 value)
++{
++	u32 reg;
++
++	mutex_lock(&rt2x00dev->csr_mutex);
++
++	/*
++	 * Wait until the RFCSR becomes available, afterwards we
++	 * can safely write the new data into the register.
++	 */
++	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++		reg = 0;
++		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
++	}
++
++	mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++				 const unsigned int word, u8 *value)
++{
++	u32 reg;
++
++	mutex_lock(&rt2x00dev->csr_mutex);
++
++	/*
++	 * Wait until the RFCSR becomes available, afterwards we
++	 * can safely write the read request into the register.
++	 * After the data has been written, we wait until hardware
++	 * returns the correct value, if at any time the register
++	 * doesn't become available in time, reg will be 0xffffffff
++	 * which means we return 0xff to the caller.
++	 */
++	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++		reg = 0;
++		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
++		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
++
++		WAIT_FOR_RFCSR(rt2x00dev, &reg);
++	}
++
++	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++	mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
+ static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ 			       const unsigned int word, const u32 value)
+ {
+@@ -635,42 +692,24 @@ static void rt2800usb_config_lna_gain(st
+ 	rt2x00dev->lna_gain = lna_gain;
+ }
+ 
+-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
+-				     struct rf_channel *rf,
+-				     struct channel_info *info)
++static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++					  struct rf_channel *rf,
++					  struct channel_info *info)
+ {
+-	u32 reg;
+-	unsigned int tx_pin;
+ 	u16 eeprom;
+ 
+-	tx_pin = 0;
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+-
+ 	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+ 
+ 	/*
+ 	 * Determine antenna settings from EEPROM
+ 	 */
+ 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+-	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+ 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+-		/* Turn off unused PA or LNA when only 1T or 1R */
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
+-	}
+ 
+ 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+ 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+ 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+-		/* Turn off unused PA or LNA when only 1T or 1R */
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
+ 	} else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2)
+ 		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+ 
+@@ -698,15 +737,11 @@ static void rt2800usb_config_channel(str
+ 
+ 		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+ 				   TXPOWER_A_TO_DEV(info->tx_power2));
+-
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
+ 	} else {
+ 		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+ 				   TXPOWER_G_TO_DEV(info->tx_power1));
+ 		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+ 				   TXPOWER_G_TO_DEV(info->tx_power2));
+-
+-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ 	}
+ 
+ 	rt2x00_set_field32(&rf->rf4, RF4_BW40,
+@@ -730,6 +765,81 @@ static void rt2800usb_config_channel(str
+ 	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ 	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ 	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++					  struct rf_channel *rf,
++					  struct channel_info *info)
++{
++	u8 rfcsr;
++
++	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
++	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++	rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++	rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++	rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++			  TXPOWER_G_TO_DEV(info->tx_power1));
++	rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++	if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
++		rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40);
++	else
++		rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20);
++
++	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
++				     struct rf_channel *rf,
++				     struct channel_info *info)
++{
++	u32 reg;
++	unsigned int tx_pin;
++	u16 eeprom;
++
++	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++		rt2800usb_config_channel_rt2x(rt2x00dev, rf, info);
++	else
++		rt2800usb_config_channel_rt3x(rt2x00dev, rf, info);
++
++	tx_pin = 0;
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
++	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
++
++	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++	/* Turn off unused PA or LNA when only 1T or 1R */
++	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++		
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
++	}
++
++	/* Turn off unused PA or LNA when only 1T or 1R */
++	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
++	}
++
++	if (rf->channel > 14)
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
++	else
++		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ 
+ 	/*
+ 	 * Change BBP settings
+@@ -935,8 +1045,12 @@ static void rt2800usb_link_stats(struct 
+ 
+ static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+ {
+-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
+-		return 0x2e + rt2x00dev->lna_gain;
++	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
++		if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
++			return 0x1c + (2 * rt2x00dev->lna_gain);
++		else
++			return 0x2e + rt2x00dev->lna_gain;
++	}
+ 
+ 	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ 		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+@@ -964,7 +1078,7 @@ static void rt2800usb_reset_tuner(struct
+ static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+ 				 struct link_qual *qual, const u32 count)
+ {
+-	if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C)
++	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ 		return;
+ 
+ 	/*
+@@ -1145,8 +1259,14 @@ static int rt2800usb_init_registers(stru
+ 	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+ 	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ 
+-	rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
+-	rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
++		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
++		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
++	} else {
++		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
++		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++	}
+ 
+ 	rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+ 	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+@@ -1166,7 +1286,11 @@ static int rt2800usb_init_registers(stru
+ 
+ 	rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
++	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
++	else
++		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+ 	rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+@@ -1427,13 +1551,16 @@ static int rt2800usb_init_bbp(struct rt2
+ 	rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+ 	rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+ 
+-	if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) {
++	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ 		rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+ 		rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+ 	}
+ 
+-	if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D)
+-		rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
++	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++		rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
++		rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
++		rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
++	}
+ 
+ 	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ 		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+@@ -1448,6 +1575,134 @@ static int rt2800usb_init_bbp(struct rt2
+ 	return 0;
+ }
+ 
++static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++				   bool bw40, u8 rfcsr24, u8 filter_target)
++{
++	unsigned int i;
++	u8 bbp;
++	u8 rfcsr;
++	u8 passband;
++	u8 stopband;
++	u8 overtuned = 0;
++
++	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++	if (bw40) {
++		rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++		rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10);
++		rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++	}
++
++	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++	/*
++	 * Set power & frequency of passband test tone
++	 */
++	rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++	for (i = 0; i < 100; i++) {
++		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++		msleep(1);
++
++		rt2800usb_bbp_read(rt2x00dev, 55, &passband);
++		if (passband)
++			break;
++	}
++
++	/*
++	 * Set power & frequency of stopband test tone
++	 */
++	rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
++
++	for (i = 0; i < 100; i++) {
++		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++		msleep(1);
++
++		rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
++
++		if ((passband - stopband) <= filter_target) {
++			rfcsr24++;
++			overtuned += ((passband - stopband) == filter_target);
++		} else
++			break;
++
++		rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++	}
++
++	rfcsr24 -= !!overtuned;
++
++	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++	return rfcsr24;
++}
++
++static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++	u8 rfcsr;
++	u8 bbp;
++
++	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++		return 0;
++
++	/*
++	 * Init RF calibration.
++	 */
++	rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++	msleep(1);
++	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++	rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
++	rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
++	rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
++	rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
++	rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
++	rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
++	rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
++	rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
++	rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
++	rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
++	rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
++	rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
++	rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
++	rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
++	rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
++	rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
++	rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
++	rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
++	rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
++	rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
++
++	/*
++	 * Set RX Filter calibration for 20MHz and 40MHz
++	 */
++	rt2x00dev->calibration_bw20 =
++	    rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++	rt2x00dev->calibration_bw40 =
++	    rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++	/*
++	 * Set back to initial state
++	 */
++	rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++	/*
++	 * set BBP back to BW20
++	 */
++	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++
++	return 0;
++}
++
+ /*
+  * Device state switch handlers.
+  */
+@@ -1491,7 +1746,8 @@ static int rt2800usb_enable_radio(struct
+ 	 */
+ 	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+ 		     rt2800usb_init_registers(rt2x00dev) ||
+-		     rt2800usb_init_bbp(rt2x00dev)))
++		     rt2800usb_init_bbp(rt2x00dev) ||
++		     rt2800usb_init_rfcsr(rt2x00dev)))
+ 		return -EIO;
+ 
+ 	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+@@ -1982,7 +2238,6 @@ static int rt2800usb_validate_eeprom(str
+ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+ {
+ 	u32 reg;
+-	u16 rev;
+ 	u16 value;
+ 	u16 eeprom;
+ 
+@@ -1996,8 +2251,7 @@ static int rt2800usb_init_eeprom(struct 
+ 	 */
+ 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+-	rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
+-	rt2x00_set_chip(rt2x00dev, RT2870, value, rev);
++	rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+ 
+ 	/*
+ 	 * The check for rt2860 is not a typo, some rt2870 hardware
+@@ -2012,7 +2266,9 @@ static int rt2800usb_init_eeprom(struct 
+ 	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ 	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ 	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+-	    !rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++	    !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ 		return -ENODEV;
+ 	}
+@@ -2127,6 +2383,27 @@ static const struct rf_channel rf_vals[]
+ 	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+ };
+ 
++/*
++ * RF value list for rt3070
++ * Supports: 2.4 GHz
++ */
++static const struct rf_channel rf_vals_3070[] = {
++	{1,  241, 2, 2 },
++	{2,  241, 2, 7 },
++	{3,  242, 2, 2 },
++	{4,  242, 2, 7 },
++	{5,  243, 2, 2 },
++	{6,  243, 2, 7 },
++	{7,  244, 2, 2 },
++	{8,  244, 2, 7 },
++	{9,  245, 2, 2 },
++	{10, 245, 2, 7 },
++	{11, 246, 2, 2 },
++	{12, 246, 2, 7 },
++	{13, 247, 2, 2 },
++	{14, 248, 2, 4 },
++};
++
+ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+ {
+ 	struct hw_mode_spec *spec = &rt2x00dev->spec;
+@@ -2184,6 +2461,10 @@ static int rt2800usb_probe_hw_mode(struc
+ 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ 		spec->num_channels = ARRAY_SIZE(rf_vals);
+ 		spec->channels = rf_vals;
++	} else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
++		   rt2x00_rf(&rt2x00dev->chip, RF2020)) {
++		spec->num_channels = ARRAY_SIZE(rf_vals_3070);
++		spec->channels = rf_vals_3070;
+ 	}
+ 
+ 	/*
+@@ -2473,6 +2754,12 @@ static const struct rt2x00_ops rt2800usb
+  * rt2800usb module information.
+  */
+ static struct usb_device_id rt2800usb_device_table[] = {
++	/* Abocom */
++	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Amit */
+ 	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* ASUS */
+@@ -2483,9 +2770,12 @@ static struct usb_device_id rt2800usb_de
+ 	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Belkin */
+ 	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Conceptronic */
+ 	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+@@ -2494,9 +2784,12 @@ static struct usb_device_id rt2800usb_de
+ 	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* D-Link */
+ 	{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
++	/* Edimax */
++	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* EnGenius */
+ 	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+@@ -2507,13 +2800,21 @@ static struct usb_device_id rt2800usb_de
+ 	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Linksys */
+ 	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
++	/* Logitec */
++	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Philips */
+ 	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Planex */
+ 	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Ralink */
+ 	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++	/* Samsung */
++	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Siemens */
+ 	{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Sitecom */
+@@ -2533,6 +2834,9 @@ static struct usb_device_id rt2800usb_de
+ 	/* ZCOM */
+ 	{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
++	/* Zinwell */
++	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
++	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	/* Zyxel */
+ 	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+ 	{ 0, }
+--- a/drivers/net/wireless/rt2x00/rt2800usb.h
++++ b/drivers/net/wireless/rt2x00/rt2800usb.h
+@@ -47,9 +47,11 @@
+ /*
+  * RT2870 version
+  */
+-#define RT2870_VERSION_C		0x0100
+-#define RT2870_VERSION_D		0x0101
+-#define RT2870_VERSION_E		0x0200
++#define RT2860C_VERSION			0x28600100
++#define RT2860D_VERSION			0x28600101
++#define RT2880E_VERSION			0x28720200
++#define RT2883_VERSION			0x28830300
++#define RT3070_VERSION			0x30700200
+ 
+ /*
+  * Signal information.
+@@ -383,6 +385,15 @@
+ #define PBF_DBG				0x043c
+ 
+ /*
++ * RF registers
++ */
++#define	RF_CSR_CFG			0x0500
++#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
++
++/*
+  * MAC Control/Status Registers(CSR).
+  * Some values are set in TU, whereas 1 TU == 1024 us.
+  */
+@@ -1482,6 +1493,46 @@ struct hw_key_entry {
+ #define BBP3_RX_ANTENNA			FIELD8(0x18)
+ 
+ /*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_BANDWIDTH			FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R			FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING		FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER		FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
++
++/*
+  * RF registers
+  */
+ 
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -780,6 +780,12 @@ struct rt2x00_dev {
+ 	u8 freq_offset;
+ 
+ 	/*
++	 * Calibration information (for rt2800usb).
++	 */
++	u8 calibration_bw20;
++	u8 calibration_bw40;
++
++	/*
+ 	 * Low level statistics which will have
+ 	 * to be kept up to date while device is running.
+ 	 */
diff --git a/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch
new file mode 100644
index 000000000..b05843db8
--- /dev/null
+++ b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch
@@ -0,0 +1,58 @@
+From cac151e6e6aa50ecb5d965aa5e2840d0e69f8efa Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 22:02:32 +0100
+Subject: [PATCH] rt2x00: Add support for 2 firmware file lengths (rt2800usb)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800usb.c |   32 +++++++++++++++++++++++++++++-
+ 1 files changed, 30 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+@@ -1128,6 +1128,34 @@ static int rt2800usb_load_firmware(struc
+ 	unsigned int i;
+ 	int status;
+ 	u32 reg;
++	u32 offset;
++	u32 length;
++	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
++
++	/*
++	 * Firmware files:
++	 * There are 2 variations of the rt2870 firmware.
++	 * a) size: 4kb
++	 * b) size: 8kb
++	 * Note that (b) contains 2 seperate firmware blobs of 4k
++	 * within the file. The first blob is the same firmware as (a),
++	 * but the second blob is for the additional chipsets.
++	 */
++	if (len < 4096) {
++		ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len);
++		return -ENOENT;
++	}
++
++	if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) {
++		offset = 0;
++		length = 4096;
++	} else if (len == 8192) {
++		offset = 4096;
++		length = 4096;
++	} else {
++		ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len);
++		return -ENOENT;
++	}
+ 
+ 	/*
+ 	 * Wait for stable hardware.
+@@ -1150,8 +1178,8 @@ static int rt2800usb_load_firmware(struc
+ 	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ 					    USB_VENDOR_REQUEST_OUT,
+ 					    FIRMWARE_IMAGE_BASE,
+-					    data, len,
+-					    REGISTER_TIMEOUT32(len));
++					    data + offset, length,
++					    REGISTER_TIMEOUT32(length));
+ 
+ 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
diff --git a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch b/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch
deleted file mode 100644
index 6c7d29d04..000000000
--- a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- /dev/null
-+++ b/include/linux/ath9k_platform.h
-@@ -0,0 +1,28 @@
-+/*
-+ * Copyright (c) 2008 Atheros Communications Inc.
-+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _LINUX_ATH9K_PLATFORM_H
-+#define _LINUX_ATH9K_PLATFORM_H
-+
-+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
-+
-+struct ath9k_platform_data {
-+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
-+};
-+
-+#endif /* _LINUX_ATH9K_PLATFORM_H */
-- 
cgit v1.2.3