From 6d574c2b2436ceda00d004b7e0aaf2cba45b0d95 Mon Sep 17 00:00:00 2001 From: nbd Date: Tue, 20 Jul 2010 01:54:01 +0000 Subject: mac80211: update to wireless-testing 2010-07-16 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22301 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches/526-ath9k_improve_nf_cal.patch | 399 --------------------- 1 file changed, 399 deletions(-) delete mode 100644 package/mac80211/patches/526-ath9k_improve_nf_cal.patch (limited to 'package/mac80211/patches/526-ath9k_improve_nf_cal.patch') diff --git a/package/mac80211/patches/526-ath9k_improve_nf_cal.patch b/package/mac80211/patches/526-ath9k_improve_nf_cal.patch deleted file mode 100644 index 2bc11a1d2..000000000 --- a/package/mac80211/patches/526-ath9k_improve_nf_cal.patch +++ /dev/null @@ -1,399 +0,0 @@ ---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -1518,77 +1518,6 @@ static void ar5008_hw_do_getnf(struct at - nfarray[5] = sign_extend(nf, 9); - } - --static void ar5008_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) --{ -- struct ath9k_nfcal_hist *h; -- int i, j; -- int32_t val; -- const u32 ar5416_cca_regs[6] = { -- AR_PHY_CCA, -- AR_PHY_CH1_CCA, -- AR_PHY_CH2_CCA, -- AR_PHY_EXT_CCA, -- AR_PHY_CH1_EXT_CCA, -- AR_PHY_CH2_EXT_CCA -- }; -- u8 chainmask, rx_chain_status; -- -- rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK); -- if (AR_SREV_9285(ah) || AR_SREV_9271(ah)) -- chainmask = 0x9; -- else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) { -- if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4)) -- chainmask = 0x1B; -- else -- chainmask = 0x09; -- } else { -- if (rx_chain_status & 0x4) -- chainmask = 0x3F; -- else if (rx_chain_status & 0x2) -- chainmask = 0x1B; -- else -- chainmask = 0x09; -- } -- -- h = ah->nfCalHist; -- -- for (i = 0; i < NUM_NF_READINGS; i++) { -- if (chainmask & (1 << i)) { -- val = REG_READ(ah, ar5416_cca_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) (h[i].privNF) << 1) & 0x1ff); -- REG_WRITE(ah, ar5416_cca_regs[i], val); -- } -- } -- -- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -- AR_PHY_AGC_CONTROL_ENABLE_NF); -- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -- AR_PHY_AGC_CONTROL_NO_UPDATE_NF); -- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -- -- for (j = 0; j < 5; j++) { -- if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & -- AR_PHY_AGC_CONTROL_NF) == 0) -- break; -- udelay(50); -- } -- -- ENABLE_REGWRITE_BUFFER(ah); -- -- for (i = 0; i < NUM_NF_READINGS; i++) { -- if (chainmask & (1 << i)) { -- val = REG_READ(ah, ar5416_cca_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) (-50) << 1) & 0x1ff); -- REG_WRITE(ah, ar5416_cca_regs[i], val); -- } -- } -- -- REGWRITE_BUFFER_FLUSH(ah); -- DISABLE_REGWRITE_BUFFER(ah); --} -- - /* - * Initialize the ANI register values with default (ini) values. - * This routine is called during a (full) hardware reset after -@@ -1666,6 +1595,14 @@ static void ar5008_hw_set_nf_limits(stru - void ar5008_hw_attach_phy_ops(struct ath_hw *ah) - { - struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -+ const u32 ar5416_cca_regs[6] = { -+ AR_PHY_CCA, -+ AR_PHY_CH1_CCA, -+ AR_PHY_CH2_CCA, -+ AR_PHY_EXT_CCA, -+ AR_PHY_CH1_EXT_CCA, -+ AR_PHY_CH2_EXT_CCA -+ }; - - priv_ops->rf_set_freq = ar5008_hw_set_channel; - priv_ops->spur_mitigate_freq = ar5008_hw_spur_mitigate; -@@ -1685,7 +1622,6 @@ void ar5008_hw_attach_phy_ops(struct ath - priv_ops->restore_chainmask = ar5008_restore_chainmask; - priv_ops->set_diversity = ar5008_set_diversity; - priv_ops->do_getnf = ar5008_hw_do_getnf; -- priv_ops->loadnf = ar5008_hw_loadnf; - - if (modparam_force_new_ani) { - priv_ops->ani_control = ar5008_hw_ani_control_new; -@@ -1701,4 +1637,5 @@ void ar5008_hw_attach_phy_ops(struct ath - priv_ops->compute_pll_control = ar5008_hw_compute_pll_control; - - ar5008_hw_set_nf_limits(ah); -+ memcpy(ah->nf_regs, ar5416_cca_regs, sizeof(ah->nf_regs)); - } ---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -1050,106 +1050,6 @@ static void ar9003_hw_set_nf_limits(stru - } - - /* -- * Find out which of the RX chains are enabled -- */ --static u32 ar9003_hw_get_rx_chainmask(struct ath_hw *ah) --{ -- u32 chain = REG_READ(ah, AR_PHY_RX_CHAINMASK); -- /* -- * The bits [2:0] indicate the rx chain mask and are to be -- * interpreted as follows: -- * 00x => Only chain 0 is enabled -- * 01x => Chain 1 and 0 enabled -- * 1xx => Chain 2,1 and 0 enabled -- */ -- return chain & 0x7; --} -- --static void ar9003_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) --{ -- struct ath9k_nfcal_hist *h; -- unsigned i, j; -- int32_t val; -- const u32 ar9300_cca_regs[6] = { -- AR_PHY_CCA_0, -- AR_PHY_CCA_1, -- AR_PHY_CCA_2, -- AR_PHY_EXT_CCA, -- AR_PHY_EXT_CCA_1, -- AR_PHY_EXT_CCA_2, -- }; -- u8 chainmask, rx_chain_status; -- struct ath_common *common = ath9k_hw_common(ah); -- -- rx_chain_status = ar9003_hw_get_rx_chainmask(ah); -- -- chainmask = 0x3F; -- h = ah->nfCalHist; -- -- for (i = 0; i < NUM_NF_READINGS; i++) { -- if (chainmask & (1 << i)) { -- val = REG_READ(ah, ar9300_cca_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) (h[i].privNF) << 1) & 0x1ff); -- REG_WRITE(ah, ar9300_cca_regs[i], val); -- } -- } -- -- /* -- * Load software filtered NF value into baseband internal minCCApwr -- * variable. -- */ -- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -- AR_PHY_AGC_CONTROL_ENABLE_NF); -- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -- AR_PHY_AGC_CONTROL_NO_UPDATE_NF); -- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -- -- /* -- * Wait for load to complete, should be fast, a few 10s of us. -- * The max delay was changed from an original 250us to 10000us -- * since 250us often results in NF load timeout and causes deaf -- * condition during stress testing 12/12/2009 -- */ -- for (j = 0; j < 1000; j++) { -- if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & -- AR_PHY_AGC_CONTROL_NF) == 0) -- break; -- udelay(10); -- } -- -- /* -- * We timed out waiting for the noisefloor to load, probably due to an -- * in-progress rx. Simply return here and allow the load plenty of time -- * to complete before the next calibration interval. We need to avoid -- * trying to load -50 (which happens below) while the previous load is -- * still in progress as this can cause rx deafness. Instead by returning -- * here, the baseband nf cal will just be capped by our present -- * noisefloor until the next calibration timer. -- */ -- if (j == 1000) { -- ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf " -- "to load: AR_PHY_AGC_CONTROL=0x%x\n", -- REG_READ(ah, AR_PHY_AGC_CONTROL)); -- return; -- } -- -- /* -- * Restore maxCCAPower register parameter again so that we're not capped -- * by the median we just loaded. This will be initial (and max) value -- * of next noise floor calibration the baseband does. -- */ -- for (i = 0; i < NUM_NF_READINGS; i++) { -- if (chainmask & (1 << i)) { -- val = REG_READ(ah, ar9300_cca_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) (-50) << 1) & 0x1ff); -- REG_WRITE(ah, ar9300_cca_regs[i], val); -- } -- } --} -- --/* - * Initialize the ANI register values with default (ini) values. - * This routine is called during a (full) hardware reset after - * all the registers are initialised from the INI. -@@ -1216,6 +1116,14 @@ static void ar9003_hw_ani_cache_ini_regs - void ar9003_hw_attach_phy_ops(struct ath_hw *ah) - { - struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -+ const u32 ar9300_cca_regs[6] = { -+ AR_PHY_CCA_0, -+ AR_PHY_CCA_1, -+ AR_PHY_CCA_2, -+ AR_PHY_EXT_CCA, -+ AR_PHY_EXT_CCA_1, -+ AR_PHY_EXT_CCA_2, -+ }; - - priv_ops->rf_set_freq = ar9003_hw_set_channel; - priv_ops->spur_mitigate_freq = ar9003_hw_spur_mitigate; -@@ -1232,10 +1140,10 @@ void ar9003_hw_attach_phy_ops(struct ath - priv_ops->set_diversity = ar9003_hw_set_diversity; - priv_ops->ani_control = ar9003_hw_ani_control; - priv_ops->do_getnf = ar9003_hw_do_getnf; -- priv_ops->loadnf = ar9003_hw_loadnf; - priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs; - - ar9003_hw_set_nf_limits(ah); -+ memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs)); - } - - void ar9003_hw_bb_watchdog_config(struct ath_hw *ah) ---- a/drivers/net/wireless/ath/ath9k/calib.c -+++ b/drivers/net/wireless/ath/ath9k/calib.c -@@ -167,6 +167,100 @@ void ath9k_hw_start_nfcal(struct ath_hw - REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); - } - -+void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) -+{ -+ struct ath9k_nfcal_hist *h; -+ unsigned i, j; -+ int32_t val; -+ u8 chainmask; -+ struct ath_common *common = ath9k_hw_common(ah); -+ -+ if (AR_SREV_9300_20_OR_LATER(ah)) -+ chainmask = 0x3F; -+ else if (AR_SREV_9285(ah) || AR_SREV_9271(ah)) -+ chainmask = 0x9; -+ else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) { -+ if ((ah->rxchainmask & 0x2) || (ah->rxchainmask & 0x4)) -+ chainmask = 0x1B; -+ else -+ chainmask = 0x09; -+ } else { -+ if (ah->rxchainmask & 0x4) -+ chainmask = 0x3F; -+ else if (ah->rxchainmask & 0x2) -+ chainmask = 0x1B; -+ else -+ chainmask = 0x09; -+ } -+ h = ah->nfCalHist; -+ -+ for (i = 0; i < NUM_NF_READINGS; i++) { -+ if (chainmask & (1 << i)) { -+ val = REG_READ(ah, ah->nf_regs[i]); -+ val &= 0xFFFFFE00; -+ val |= (((u32) (h[i].privNF) << 1) & 0x1ff); -+ REG_WRITE(ah, ah->nf_regs[i], val); -+ } -+ } -+ -+ /* -+ * Load software filtered NF value into baseband internal minCCApwr -+ * variable. -+ */ -+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -+ AR_PHY_AGC_CONTROL_ENABLE_NF); -+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, -+ AR_PHY_AGC_CONTROL_NO_UPDATE_NF); -+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -+ -+ /* -+ * Wait for load to complete, should be fast, a few 10s of us. -+ * The max delay was changed from an original 250us to 10000us -+ * since 250us often results in NF load timeout and causes deaf -+ * condition during stress testing 12/12/2009 -+ */ -+ for (j = 0; j < 1000; j++) { -+ if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & -+ AR_PHY_AGC_CONTROL_NF) == 0) -+ break; -+ udelay(10); -+ } -+ -+ /* -+ * We timed out waiting for the noisefloor to load, probably due to an -+ * in-progress rx. Simply return here and allow the load plenty of time -+ * to complete before the next calibration interval. We need to avoid -+ * trying to load -50 (which happens below) while the previous load is -+ * still in progress as this can cause rx deafness. Instead by returning -+ * here, the baseband nf cal will just be capped by our present -+ * noisefloor until the next calibration timer. -+ */ -+ if (j == 1000) { -+ ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf " -+ "to load: AR_PHY_AGC_CONTROL=0x%x\n", -+ REG_READ(ah, AR_PHY_AGC_CONTROL)); -+ return; -+ } -+ -+ /* -+ * Restore maxCCAPower register parameter again so that we're not capped -+ * by the median we just loaded. This will be initial (and max) value -+ * of next noise floor calibration the baseband does. -+ */ -+ ENABLE_REGWRITE_BUFFER(ah); -+ for (i = 0; i < NUM_NF_READINGS; i++) { -+ if (chainmask & (1 << i)) { -+ val = REG_READ(ah, ah->nf_regs[i]); -+ val &= 0xFFFFFE00; -+ val |= (((u32) (-50) << 1) & 0x1ff); -+ REG_WRITE(ah, ah->nf_regs[i], val); -+ } -+ } -+ REGWRITE_BUFFER_FLUSH(ah); -+ DISABLE_REGWRITE_BUFFER(ah); -+} -+ -+ - static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf) - { - struct ath_common *common = ath9k_hw_common(ah); ---- a/drivers/net/wireless/ath/ath9k/calib.h -+++ b/drivers/net/wireless/ath/ath9k/calib.h -@@ -109,6 +109,7 @@ struct ath9k_pacal_info{ - - bool ath9k_hw_reset_calvalid(struct ath_hw *ah); - void ath9k_hw_start_nfcal(struct ath_hw *ah); -+void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan); - int16_t ath9k_hw_getnf(struct ath_hw *ah, - struct ath9k_channel *chan); - void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah); ---- a/drivers/net/wireless/ath/ath9k/hw-ops.h -+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h -@@ -264,12 +264,6 @@ static inline void ath9k_hw_do_getnf(str - ath9k_hw_private_ops(ah)->do_getnf(ah, nfarray); - } - --static inline void ath9k_hw_loadnf(struct ath_hw *ah, -- struct ath9k_channel *chan) --{ -- ath9k_hw_private_ops(ah)->loadnf(ah, chan); --} -- - static inline bool ath9k_hw_init_cal(struct ath_hw *ah, - struct ath9k_channel *chan) - { ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -510,7 +510,6 @@ struct ath_gen_timer_table { - * AR_RTC_PLL_CONTROL for a given channel - * @setup_calibration: set up calibration - * @iscal_supported: used to query if a type of calibration is supported -- * @loadnf: load noise floor read from each chain on the CCA registers - * - * @ani_reset: reset ANI parameters to default values - * @ani_lower_immunity: lower the noise immunity level. The level controls -@@ -564,7 +563,6 @@ struct ath_hw_private_ops { - bool (*ani_control)(struct ath_hw *ah, enum ath9k_ani_cmd cmd, - int param); - void (*do_getnf)(struct ath_hw *ah, int16_t nfarray[NUM_NF_READINGS]); -- void (*loadnf)(struct ath_hw *ah, struct ath9k_channel *chan); - - /* ANI */ - void (*ani_reset)(struct ath_hw *ah, bool is_scanning); -@@ -658,6 +656,7 @@ struct ath_hw { - bool need_an_top2_fixup; - u16 tx_trig_level; - -+ u32 nf_regs[6]; - struct ath_nf_limits nf_2g; - struct ath_nf_limits nf_5g; - u16 rfsilent; -- cgit v1.2.3