From 6f35f0363b0500981f09ea008859259815005f5c Mon Sep 17 00:00:00 2001
From: nico <nico@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 16 Dec 2005 12:00:19 +0000
Subject: port l2tpd fixes from changeset:2696 to trunk.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2697 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 package/l2tpd/files/l2tpd.conf    | 29 +++++++++++++++++++++++++++++
 package/l2tpd/files/l2tpd.init    | 21 +++++++++++++++++++++
 package/l2tpd/files/options.l2tpd | 17 +++++++++++++++++
 3 files changed, 67 insertions(+)
 create mode 100644 package/l2tpd/files/l2tpd.conf
 create mode 100644 package/l2tpd/files/l2tpd.init
 create mode 100644 package/l2tpd/files/options.l2tpd

(limited to 'package/l2tpd/files')

diff --git a/package/l2tpd/files/l2tpd.conf b/package/l2tpd/files/l2tpd.conf
new file mode 100644
index 000000000..2a9ba1cc6
--- /dev/null
+++ b/package/l2tpd/files/l2tpd.conf
@@ -0,0 +1,29 @@
+;
+; This is a minimal sample l2tpd configuration file for use
+; with L2TP over IPsec.
+;
+; The idea is to provide an L2TP daemon to which remote Windows L2TP/IPsec
+; clients connect. In this example, the internal (protected) network 
+; is 192.168.1.0/24.  A special IP range within this network is reserved
+; for the remote clients: 192.168.1.128/25
+; (i.e. 192.168.1.128 ... 192.168.1.254)
+;
+; The listen-addr parameter can be used if you want to bind the L2TP daemon
+; to a specific IP address instead of to all interfaces. For instance,
+; you could bind it to the interface of the internal LAN (e.g. 192.168.1.98
+; in the example below). Yet another IP address (local ip, e.g. 192.168.1.99)
+; will be used by l2tpd as its address on pppX interfaces.
+
+[global]
+; listen-addr = 192.168.1.98
+
+[lns default]
+ip range = 192.168.1.128-192.168.1.254
+local ip = 192.168.1.99
+require chap = yes
+refuse pap = yes
+require authentication = yes
+name = LinuxVPNserver
+ppp debug = yes
+pppoptfile = /etc/ppp/options.l2tpd
+length bit = yes
diff --git a/package/l2tpd/files/l2tpd.init b/package/l2tpd/files/l2tpd.init
new file mode 100644
index 000000000..f53175799
--- /dev/null
+++ b/package/l2tpd/files/l2tpd.init
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+BIN=l2tpd
+DEFAULT=/etc/default/$BIN
+RUN_D=/var/run
+PID_F=$RUN_D/$BIN.pid
+[ -f $DEFAULT ] && . $DEFAULT
+
+case $1 in
+ start)
+  $BIN $OPTIONS
+  ;;
+ stop)
+  [ -f $PID_F ] && kill $(cat $PID_F)
+  ;;
+ *)
+  echo "usage: $0 (start|stop)"
+  exit 1
+esac
+
+exit $?
diff --git a/package/l2tpd/files/options.l2tpd b/package/l2tpd/files/options.l2tpd
new file mode 100644
index 000000000..425a56e08
--- /dev/null
+++ b/package/l2tpd/files/options.l2tpd
@@ -0,0 +1,17 @@
+ipcp-accept-local
+ipcp-accept-remote
+ms-dns  192.168.1.1
+ms-dns  192.168.1.3
+ms-wins 192.168.1.2
+ms-wins 192.168.1.4
+noccp
+auth
+crtscts
+idle 1800
+mtu 1410
+mru 1410
+nodefaultroute
+debug
+lock
+proxyarp
+connect-delay 5000
-- 
cgit v1.2.3