From 4b191d9789dca901687e6ce441a363ce56132408 Mon Sep 17 00:00:00 2001 From: nbd Date: Thu, 1 Feb 2007 21:06:24 +0000 Subject: update d80211 to latest wireless-dev version git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6241 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/d80211/src/include/net/d80211.h | 154 ++++++++++---------------------- 1 file changed, 46 insertions(+), 108 deletions(-) (limited to 'package/d80211/src/include/net/d80211.h') diff --git a/package/d80211/src/include/net/d80211.h b/package/d80211/src/include/net/d80211.h index 30980e11e..65a5d3681 100644 --- a/package/d80211/src/include/net/d80211.h +++ b/package/d80211/src/include/net/d80211.h @@ -15,7 +15,7 @@ #include #include #include -#include "d80211_shared.h" +#include /* Note! Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be * called in hardware interrupt context. The low-level driver must not call any @@ -46,6 +46,10 @@ #define IEEE80211_VERSION 2 +#define IEEE80211_CHAN_W_SCAN 0x00000001 +#define IEEE80211_CHAN_W_ACTIVE_SCAN 0x00000002 +#define IEEE80211_CHAN_W_IBSS 0x00000004 + /* Channel information structure. Low-level driver is expected to fill in chan, * freq, and val fields. Other fields will be filled in by 80211.o based on * hostapd information and low-level driver does not need to use them. The @@ -60,6 +64,22 @@ struct ieee80211_channel { unsigned char antenna_max; }; +#define IEEE80211_RATE_ERP 0x00000001 +#define IEEE80211_RATE_BASIC 0x00000002 +#define IEEE80211_RATE_PREAMBLE2 0x00000004 +#define IEEE80211_RATE_SUPPORTED 0x00000010 +#define IEEE80211_RATE_OFDM 0x00000020 +#define IEEE80211_RATE_CCK 0x00000040 +#define IEEE80211_RATE_TURBO 0x00000080 +#define IEEE80211_RATE_MANDATORY 0x00000100 + +#define IEEE80211_RATE_CCK_2 (IEEE80211_RATE_CCK | IEEE80211_RATE_PREAMBLE2) +#define IEEE80211_RATE_MODULATION(f) \ +(f & (IEEE80211_RATE_CCK | IEEE80211_RATE_OFDM)) + +/* Low-level driver should set PREAMBLE2, OFDM, CCK, and TURBO flags. + * BASIC, SUPPORTED, ERP, and MANDATORY flags are set in 80211.o based on the + * configuration. */ struct ieee80211_rate { int rate; /* rate in 100 kbps */ int val; /* hw specific value for the rate */ @@ -76,12 +96,25 @@ struct ieee80211_rate { * optimizing channel utilization estimates */ }; -struct ieee80211_hw_modes { - int mode; - int num_channels; - struct ieee80211_channel *channels; - int num_rates; - struct ieee80211_rate *rates; +/* 802.11g is backwards-compatible with 802.11b, so a wlan card can + * actually be both in 11b and 11g modes at the same time. */ +enum { + MODE_IEEE80211A = 0 /* IEEE 802.11a */, + MODE_IEEE80211B = 1 /* IEEE 802.11b only */, + MODE_ATHEROS_TURBO = 2 /* Atheros Turbo mode (2x.11a at 5 GHz) */, + MODE_IEEE80211G = 3 /* IEEE 802.11g (and 802.11b compatibility) */, + MODE_ATHEROS_TURBOG = 4 /* Atheros Turbo mode (2x.11g at 2.4 GHz) */, + NUM_IEEE80211_MODES = 5 +}; + +struct ieee80211_hw_mode { + int mode; /* MODE_IEEE80211... */ + int num_channels; /* Number of channels (below) */ + struct ieee80211_channel *channels; /* Array of supported channels */ + int num_rates; /* Number of rates (below) */ + struct ieee80211_rate *rates; /* Array of supported rates */ + + struct list_head list; /* Internal, don't touch */ }; struct ieee80211_tx_queue_params { @@ -135,7 +168,6 @@ struct ieee80211_low_level_stats { #define HW_KEY_IDX_INVALID -1 struct ieee80211_tx_control { - enum { PKT_NORMAL = 0, PKT_PROBE_RESP } pkt_type; int tx_rate; /* Transmit rate, given as the hw specific value for the * rate (from struct ieee80211_rate) */ int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw @@ -420,9 +452,7 @@ typedef enum { SET_KEY, DISABLE_KEY, REMOVE_ALL_KEYS, } set_key_cmd; -/* This is driver-visible part of the per-hw state the stack keeps. - * If you change something in here, call ieee80211_update_hw() to - * notify the stack about the change. */ +/* This is driver-visible part of the per-hw state the stack keeps. */ struct ieee80211_hw { /* these are assigned by d80211, don't write */ int index; @@ -512,9 +542,6 @@ struct ieee80211_hw { /* This is maximum value for rssi reported by this device */ int maxssi; - int num_modes; - struct ieee80211_hw_modes *modes; - /* Number of available hardware TX queues for data packets. * WMM requires at least four queues. */ int queues; @@ -713,11 +740,11 @@ struct ieee80211_ops { * priv_data_len. */ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, - struct ieee80211_ops *ops); + const struct ieee80211_ops *ops); /* Register hardware device to the IEEE 802.11 code and kernel. Low-level * drivers must call this function before using any other IEEE 802.11 - * function. */ + * function except ieee80211_register_hwmode. */ int ieee80211_register_hw(struct ieee80211_hw *hw); /* driver can use this and ieee80211_get_rx_led_name to get the @@ -750,9 +777,9 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) #endif } -/* Call this function if you changed the hardware description after - * ieee80211_register_hw */ -int ieee80211_update_hw(struct ieee80211_hw *hw); +/* Register a new hardware PHYMODE capability to the stack. */ +int ieee80211_register_hwmode(struct ieee80211_hw *hw, + struct ieee80211_hw_mode *mode); /* Unregister a hardware device. This function instructs 802.11 code to free * allocated resources and unregister netdevices from the kernel. */ @@ -936,95 +963,6 @@ enum { IEEE80211_TEST_PARAM_TX_ANT_SEL_RAW = 5, }; -/* IEEE 802.11 defines */ - -#define FCS_LEN 4 - -#define IEEE80211_DATA_LEN 2304 -/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. - - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - -#define IEEE80211_FCTL_VERS 0x0003 -#define IEEE80211_FCTL_FTYPE 0x000c -#define IEEE80211_FCTL_STYPE 0x00f0 -#define IEEE80211_FCTL_TODS 0x0100 -#define IEEE80211_FCTL_FROMDS 0x0200 -#define IEEE80211_FCTL_MOREFRAGS 0x0400 -#define IEEE80211_FCTL_RETRY 0x0800 -#define IEEE80211_FCTL_PM 0x1000 -#define IEEE80211_FCTL_MOREDATA 0x2000 -#define IEEE80211_FCTL_PROTECTED 0x4000 -#define IEEE80211_FCTL_ORDER 0x8000 - -#define IEEE80211_SCTL_FRAG 0x000F -#define IEEE80211_SCTL_SEQ 0xFFF0 - -#define IEEE80211_FTYPE_MGMT 0x0000 -#define IEEE80211_FTYPE_CTL 0x0004 -#define IEEE80211_FTYPE_DATA 0x0008 - -/* management */ -#define IEEE80211_STYPE_ASSOC_REQ 0x0000 -#define IEEE80211_STYPE_ASSOC_RESP 0x0010 -#define IEEE80211_STYPE_REASSOC_REQ 0x0020 -#define IEEE80211_STYPE_REASSOC_RESP 0x0030 -#define IEEE80211_STYPE_PROBE_REQ 0x0040 -#define IEEE80211_STYPE_PROBE_RESP 0x0050 -#define IEEE80211_STYPE_BEACON 0x0080 -#define IEEE80211_STYPE_ATIM 0x0090 -#define IEEE80211_STYPE_DISASSOC 0x00A0 -#define IEEE80211_STYPE_AUTH 0x00B0 -#define IEEE80211_STYPE_DEAUTH 0x00C0 -#define IEEE80211_STYPE_ACTION 0x00D0 - -/* control */ -#define IEEE80211_STYPE_PSPOLL 0x00A0 -#define IEEE80211_STYPE_RTS 0x00B0 -#define IEEE80211_STYPE_CTS 0x00C0 -#define IEEE80211_STYPE_ACK 0x00D0 -#define IEEE80211_STYPE_CFEND 0x00E0 -#define IEEE80211_STYPE_CFENDACK 0x00F0 - -/* data */ -#define IEEE80211_STYPE_DATA 0x0000 -#define IEEE80211_STYPE_DATA_CFACK 0x0010 -#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 -#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 -#define IEEE80211_STYPE_NULLFUNC 0x0040 -#define IEEE80211_STYPE_CFACK 0x0050 -#define IEEE80211_STYPE_CFPOLL 0x0060 -#define IEEE80211_STYPE_CFACKPOLL 0x0070 -#define IEEE80211_STYPE_QOS_DATA 0x0080 -#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 -#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 -#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 -#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 -#define IEEE80211_STYPE_QOS_CFACK 0x00D0 -#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 -#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 - - -/* miscellaneous IEEE 802.11 constants */ -#define IEEE80211_MAX_FRAG_THRESHOLD 2346 -#define IEEE80211_MAX_RTS_THRESHOLD 2347 -#define IEEE80211_MAX_AID 2007 -#define IEEE80211_MAX_TIM_LEN 251 - -struct ieee80211_hdr { - __le16 frame_control; - __le16 duration_id; - u8 addr1[6]; - u8 addr2[6]; - u8 addr3[6]; - __le16 seq_ctrl; - u8 addr4[6]; -} __attribute__ ((packed)); - /* return a pointer to the source address (SA) */ static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) { -- cgit v1.2.3