From bccc5a230c0fbc1a21bef9c318c47812e8f7dde3 Mon Sep 17 00:00:00 2001 From: luka Date: Thu, 22 Nov 2012 21:16:04 +0000 Subject: [boot] uboot-kirkwood: update to 2012.10 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34303 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files/board/iomega/iconnect/kwbimage.cfg | 165 --------------------- 1 file changed, 165 deletions(-) delete mode 100644 package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg (limited to 'package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg') diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg deleted file mode 100644 index dee546a52..000000000 --- a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg +++ /dev/null @@ -1,165 +0,0 @@ -# -# (C) Copyright 2009-2012 -# Wojciech Dubowik -# Luka Perkov -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xffd100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xffd01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -# bit23-14: 0x0, -# bit24: 0x1, enable exit self refresh mode on DDR access -# bit25: 0x1, required -# bit29-26: 0x0, -# bit31-30: 0x1, - -DATA 0xffd01404 0x37543000 # DDR Controller Control Low -# bit4: 0x0, addr/cmd in smame cycle -# bit5: 0x0, clk is driven during self refresh, we don't care for APX -# bit6: 0x0, use recommended falling edge of clk for addr/cmd -# bit14: 0x0, input buffer always powered up -# bit18: 0x1, cpu lock transaction enabled -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 0x3, required -# bit31: 0x0, no additional STARTBURST delay - -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11-8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: 0x0, required - -DATA 0xffd01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width (x8) -# bit3-2: 11, Cs0size (1Gb) -# bit5-4: 00, Cs1width (x8) -# bit7-6: 11, Cs1size (1Gb) -# bit9-8: 00, Cs2width (nonexistent) -# bit11-10: 00, Cs2size (nonexistent) -# bit13-12: 00, Cs3width (nonexistent) -# bit15-14: 00, Cs3size (nonexistent) -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0x0, required - -DATA 0xffd01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0x0, required - -DATA 0xffd01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0x0, required - -DATA 0xffd0141c 0x00000c52 # DDR Mode -# bit2-0: 0x2, BurstLen=2 required -# bit3: 0x0, BurstType=0 required -# bit6-4: 0x4, CL=5 -# bit7: 0x0, TestMode=0 normal -# bit8: 0x0, DLL reset=0 normal -# bit11-9: 0x6, auto-precharge write recovery ???????????? -# bit12: 0x0, PD must be zero -# bit31-13: 0x0, required - -DATA 0xffd01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 0x0, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 0x0, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0x0, required - -DATA 0xffd01424 0x0000f17f # DDR Controller Control High -# bit2-0: 0x7, required -# bit3: 0x1, MBUS Burst Chop disabled -# bit6-4: 0x7, required -# bit7: 0x0, -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9: 0x0, no half clock cycle addition to dataout -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -# bit15-12: 0xf, required -# bit31-16: 0x0, required - -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -# bit0: 0x1, Window enabled -# bit1: 0x0, Write Protect disabled -# bit3-2: 0x0, CS0 hit selected -# bit23-4: 0xfffff, required -# bit31-24: 0x0f, Size (i.e. 256MB) - -DATA 0xffd01508 0x00000000 # CS[1]n Base address to 256Mb -DATA 0xffd0150c 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled - -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -# bit3-2: 0x1, ODT1 active NEVER! -# bit31-4: 0x0, required - -DATA 0xffd0149c 0x0000e803 # CPU ODT Control -DATA 0xffd01480 0x00000001 # DDR Initialization Control -# bit0: 0x1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 -- cgit v1.2.3