From 195b21ed59f3a93659c747b979693085ad30bffb Mon Sep 17 00:00:00 2001 From: nbd Date: Mon, 30 May 2005 22:46:44 +0000 Subject: split kernel patches into board dependend and generic git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1122 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches/generic/202-pl2303_backport.patch | 738 +++++++++++++++++++++ 1 file changed, 738 insertions(+) create mode 100644 openwrt/target/linux/linux-2.4/patches/generic/202-pl2303_backport.patch (limited to 'openwrt/target/linux/linux-2.4/patches/generic/202-pl2303_backport.patch') diff --git a/openwrt/target/linux/linux-2.4/patches/generic/202-pl2303_backport.patch b/openwrt/target/linux/linux-2.4/patches/generic/202-pl2303_backport.patch new file mode 100644 index 000000000..8577499b0 --- /dev/null +++ b/openwrt/target/linux/linux-2.4/patches/generic/202-pl2303_backport.patch @@ -0,0 +1,738 @@ +diff -rNu linux-2.4.29.old/drivers/usb/serial/pl2303.c linux-2.4.29/drivers/usb/serial/pl2303.c +--- linux-2.4.29.old/drivers/usb/serial/pl2303.c 2005-03-22 14:48:04.000000000 +0100 ++++ linux-2.4.29/drivers/usb/serial/pl2303.c 2005-03-22 15:33:05.735943352 +0100 +@@ -1,7 +1,7 @@ + /* + * Prolific PL2303 USB to serial adaptor driver + * +- * Copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) ++ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2003 IBM Corp. + * + * Original driver for 2.2.x by anonymous +@@ -12,8 +12,16 @@ + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this driver +- * 2003_Apr_24 gkh +- * Added line error reporting support. Hopefully it is correct... ++ * ++ * ++ * 2005_Mar_05 grsch ++ * ported 2.6.8 pl2303.c to 2.4.20 format ++ * (HX model works fine now, ID table should be brought up to date) ++ * Gregor Schaffrath ++ * ++ * 2002_Mar_26 gkh ++ * allowed driver to work properly if there is no tty assigned to a port ++ * (this happens for serial console devices.) + * + * 2001_Oct_06 gkh + * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. +@@ -33,6 +41,9 @@ + * + */ + ++static int debug; ++ ++ + #include + #include + #include +@@ -46,43 +57,44 @@ + #include + #include + #include +- +-#ifdef CONFIG_USB_SERIAL_DEBUG +- static int debug = 1; +-#else +- static int debug; +-#endif +- + #include "usb-serial.h" + #include "pl2303.h" + + /* + * Version Information + */ +-#define DRIVER_VERSION "v0.10" ++#define DRIVER_VERSION "v0.11" + #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" + +- +- + static struct usb_device_id id_table [] = { + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, +- { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) }, + { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) }, +- { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, +- { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, +- { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) }, +- { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, +- { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, ++ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, ++ { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, ++ { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) }, ++ { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, ++ { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, ++ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, ++ { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, + { } /* Terminating entry */ + }; + + MODULE_DEVICE_TABLE (usb, id_table); + ++/* ++static struct usb_driver pl2303_driver = { ++ .owner = THIS_MODULE, ++ .name = "pl2303", ++ .probe = usb_serial_probe, ++ .disconnect = usb_serial_disconnect, ++ .id_table = id_table, ++}; ++*/ + + #define SET_LINE_REQUEST_TYPE 0x21 + #define SET_LINE_REQUEST 0x20 +@@ -130,6 +142,9 @@ + static int pl2303_write (struct usb_serial_port *port, int from_user, + const unsigned char *buf, int count); + static void pl2303_break_ctl(struct usb_serial_port *port,int break_state); ++static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file); ++static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, ++ unsigned int set, unsigned int clear); + static int pl2303_startup (struct usb_serial *serial); + static void pl2303_shutdown (struct usb_serial *serial); + +@@ -149,27 +164,48 @@ + .ioctl = pl2303_ioctl, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, ++ //.tiocmget = pl2303_tiocmget, ++ //.tiocmset = pl2303_tiocmset, + .read_bulk_callback = pl2303_read_bulk_callback, + .read_int_callback = pl2303_read_int_callback, + .write_bulk_callback = pl2303_write_bulk_callback, ++ //.attach = pl2303_startup, + .startup = pl2303_startup, + .shutdown = pl2303_shutdown, + }; + ++enum pl2303_type { ++ type_0, /* don't know the difference between type 0 and */ ++ type_1, /* type 1, until someone from prolific tells us... */ ++ HX, /* HX version of the pl2303 chip */ ++}; ++ + struct pl2303_private { + spinlock_t lock; + wait_queue_head_t delta_msr_wait; + u8 line_control; + u8 line_status; + u8 termios_initialized; ++ enum pl2303_type type; + }; + + + static int pl2303_startup (struct usb_serial *serial) + { + struct pl2303_private *priv; ++ enum pl2303_type type = type_0; + int i; + ++ if (serial->dev->descriptor.bDeviceClass == 0x02) ++ type = type_0; ++ else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) ++ type = HX; ++ else if (serial->dev->descriptor.bDeviceClass == 0x00) ++ type = type_1; ++ else if (serial->dev->descriptor.bDeviceClass == 0xFF) ++ type = type_1; ++ dbg("device type: %d", type); ++ + for (i = 0; i < serial->num_ports; ++i) { + priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL); + if (!priv) +@@ -177,7 +213,8 @@ + memset (priv, 0x00, sizeof (struct pl2303_private)); + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); +- usb_set_serial_port_data(&serial->port[i], priv); ++ priv->type = type; ++ serial->port[i].private = priv; + } + return 0; + } +@@ -215,13 +252,13 @@ + memcpy (port->write_urb->transfer_buffer, buf, count); + } + +- usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer); ++ usb_serial_debug_data(__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer); + + port->write_urb->transfer_buffer_length = count; + port->write_urb->dev = port->serial->dev; + result = usb_submit_urb (port->write_urb); + if (result) +- err("%s - failed submitting write urb, error %d", __FUNCTION__, result); ++ err("%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + else + result = count; + +@@ -233,7 +270,7 @@ + static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios) + { + struct usb_serial *serial = port->serial; +- struct pl2303_private *priv = usb_get_serial_port_data(port); ++ struct pl2303_private *priv = port->private; + unsigned long flags; + unsigned int cflag; + unsigned char *buf; +@@ -241,8 +278,7 @@ + int i; + u8 control; + +- dbg("%s - port %d, initialized = %d", __FUNCTION__, port->number, +- priv->termios_initialized); ++ dbg("%s - port %d", __FUNCTION__, port->number); + + if ((!port->tty) || (!port->tty->termios)) { + dbg("%s - no tty structures", __FUNCTION__); +@@ -269,7 +305,7 @@ + + buf = kmalloc (7, GFP_KERNEL); + if (!buf) { +- err("%s - out of memory.", __FUNCTION__); ++ err("%s - out of memory.\n", __FUNCTION__); + return; + } + memset (buf, 0x00, 0x07); +@@ -311,7 +347,7 @@ + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; + default: +- err ("pl2303 driver does not support the baudrate requested (fix it)"); ++ err("pl2303 driver does not support the baudrate requested (fix it)\n"); + break; + } + dbg("%s - baud = %d", __FUNCTION__, baud); +@@ -380,26 +416,30 @@ + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + + if (cflag & CRTSCTS) { +- i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), +- VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, +- 0x0, 0x41, NULL, 0, 100); +- dbg ("0x40:0x1:0x0:0x41 %d", i); ++ __u16 index; ++ if (priv->type == HX) ++ index = 0x61; ++ else ++ index = 0x41; ++ i = usb_control_msg(serial->dev, ++ usb_sndctrlpipe(serial->dev, 0), ++ VENDOR_WRITE_REQUEST, ++ VENDOR_WRITE_REQUEST_TYPE, ++ 0x0, index, NULL, 0, 100); ++ dbg ("0x40:0x1:0x0:0x%x %d", index, i); + } + + kfree (buf); +-} +- ++} + + static int pl2303_open (struct usb_serial_port *port, struct file *filp) + { + struct termios tmp_termios; + struct usb_serial *serial = port->serial; ++ struct pl2303_private *priv = port->private; + unsigned char *buf; + int result; + +- if (port_paranoia_check (port, __FUNCTION__)) +- return -ENODEV; +- + dbg("%s - port %d", __FUNCTION__, port->number); + + usb_clear_halt(serial->dev, port->write_urb->pipe); +@@ -427,6 +467,18 @@ + SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1); + FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0); + FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0); ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1); ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0); ++ ++ if (priv->type == HX) { ++ /* HX chip */ ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44); ++ /* reset upstream data pipes */ ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0); ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0); ++ } else { ++ SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24); ++ } + + kfree(buf); + +@@ -441,7 +493,7 @@ + port->read_urb->dev = serial->dev; + result = usb_submit_urb (port->read_urb); + if (result) { +- err("%s - failed submitting read urb, error %d", __FUNCTION__, result); ++ err("%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + pl2303_close (port, NULL); + return -EPROTO; + } +@@ -450,7 +502,7 @@ + port->interrupt_in_urb->dev = serial->dev; + result = usb_submit_urb (port->interrupt_in_urb); + if (result) { +- err("%s - failed submitting interrupt urb, error %d", __FUNCTION__, result); ++ err("%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result); + pl2303_close (port, NULL); + return -EPROTO; + } +@@ -460,125 +512,103 @@ + + static void pl2303_close (struct usb_serial_port *port, struct file *filp) + { +- struct usb_serial *serial; + struct pl2303_private *priv; + unsigned long flags; + unsigned int c_cflag; + int result; + +- if (port_paranoia_check (port, __FUNCTION__)) +- return; +- serial = get_usb_serial (port, __FUNCTION__); +- if (!serial) +- return; +- + dbg("%s - port %d", __FUNCTION__, port->number); + +- if (serial->dev) { +- if (port->tty) { +- c_cflag = port->tty->termios->c_cflag; +- if (c_cflag & HUPCL) { +- /* drop DTR and RTS */ +- priv = usb_get_serial_port_data(port); +- spin_lock_irqsave(&priv->lock, flags); +- priv->line_control = 0; +- spin_unlock_irqrestore (&priv->lock, flags); +- set_control_lines (port->serial->dev, 0); +- } +- } ++ /* shutdown our urbs */ ++ dbg("%s - shutting down urbs", __FUNCTION__); ++ result = usb_unlink_urb (port->write_urb); ++ if (result) ++ dbg("%s - usb_unlink_urb (write_urb)" ++ " failed with reason: %d", __FUNCTION__, ++ result); + +- /* shutdown our urbs */ +- dbg("%s - shutting down urbs", __FUNCTION__); +- result = usb_unlink_urb (port->write_urb); +- if (result) +- dbg("%s - usb_unlink_urb (write_urb)" +- " failed with reason: %d", __FUNCTION__, +- result); ++ result = usb_unlink_urb (port->read_urb); ++ if (result) ++ dbg("%s - usb_unlink_urb (read_urb) " ++ "failed with reason: %d", __FUNCTION__, ++ result); + +- result = usb_unlink_urb (port->read_urb); +- if (result) +- dbg("%s - usb_unlink_urb (read_urb) " +- "failed with reason: %d", __FUNCTION__, +- result); ++ result = usb_unlink_urb (port->interrupt_in_urb); ++ if (result) ++ dbg("%s - usb_unlink_urb (interrupt_in_urb)" ++ " failed with reason: %d", __FUNCTION__, ++ result); + +- result = usb_unlink_urb (port->interrupt_in_urb); +- if (result) +- dbg("%s - usb_unlink_urb (interrupt_in_urb)" +- " failed with reason: %d", __FUNCTION__, +- result); ++ if (port->tty) { ++ c_cflag = port->tty->termios->c_cflag; ++ if (c_cflag & HUPCL) { ++ /* drop DTR and RTS */ ++ priv = port->private; ++ spin_lock_irqsave(&priv->lock, flags); ++ priv->line_control = 0; ++ spin_unlock_irqrestore (&priv->lock, flags); ++ set_control_lines (port->serial->dev, 0); ++ } + } ++ + } + ++/* taken from 2.4.20 driver */ + static int set_modem_info (struct usb_serial_port *port, unsigned int cmd, unsigned int *value) + { +- struct pl2303_private *priv = usb_get_serial_port_data(port); +- unsigned long flags; +- unsigned int arg; +- u8 control; +- +- if (copy_from_user(&arg, value, sizeof(int))) +- return -EFAULT; +- +- spin_lock_irqsave (&priv->lock, flags); +- switch (cmd) { +- case TIOCMBIS: +- if (arg & TIOCM_RTS) +- priv->line_control |= CONTROL_RTS; +- if (arg & TIOCM_DTR) +- priv->line_control |= CONTROL_DTR; +- break; +- +- case TIOCMBIC: +- if (arg & TIOCM_RTS) +- priv->line_control &= ~CONTROL_RTS; +- if (arg & TIOCM_DTR) +- priv->line_control &= ~CONTROL_DTR; +- break; ++ struct pl2303_private *priv = port->private; ++ unsigned int arg; + +- case TIOCMSET: +- /* turn off RTS and DTR and then only turn +- on what was asked to */ +- priv->line_control &= ~(CONTROL_RTS | CONTROL_DTR); +- priv->line_control |= ((arg & TIOCM_RTS) ? CONTROL_RTS : 0); +- priv->line_control |= ((arg & TIOCM_DTR) ? CONTROL_DTR : 0); +- break; +- } +- control = priv->line_control; +- spin_unlock_irqrestore (&priv->lock, flags); +- +- return set_control_lines (port->serial->dev, control); ++ if (copy_from_user(&arg, value, sizeof(int))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case TIOCMBIS: ++ if (arg & TIOCM_RTS) ++ priv->line_control |= CONTROL_RTS; ++ if (arg & TIOCM_DTR) ++ priv->line_control |= CONTROL_DTR; ++ break; ++ ++ case TIOCMBIC: ++ if (arg & TIOCM_RTS) ++ priv->line_control &= ~CONTROL_RTS; ++ if (arg & TIOCM_DTR) ++ priv->line_control &= ~CONTROL_DTR; ++ break; ++ ++ case TIOCMSET: ++ /* turn off RTS and DTR and then only turn ++ on what was asked to */ ++ priv->line_control &= ~(CONTROL_RTS | CONTROL_DTR); ++ priv->line_control |= ((arg & TIOCM_RTS) ? CONTROL_RTS : 0); ++ priv->line_control |= ((arg & TIOCM_DTR) ? CONTROL_DTR : 0); ++ break; ++ } ++ ++ return set_control_lines (port->serial->dev, priv->line_control); + } + + static int get_modem_info (struct usb_serial_port *port, unsigned int *value) + { +- struct pl2303_private *priv = usb_get_serial_port_data(port); +- unsigned long flags; +- unsigned int mcr; +- unsigned int status; +- unsigned int result; +- +- spin_lock_irqsave (&priv->lock, flags); +- mcr = priv->line_control; +- status = priv->line_status; +- spin_unlock_irqrestore (&priv->lock, flags); +- +- result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) +- | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) +- | ((status & UART_CTS) ? TIOCM_CTS : 0) +- | ((status & UART_DSR) ? TIOCM_DSR : 0) +- | ((status & UART_RING) ? TIOCM_RI : 0) +- | ((status & UART_DCD) ? TIOCM_CD : 0); +- +- dbg("%s - result = %x", __FUNCTION__, result); +- +- if (copy_to_user(value, &result, sizeof(int))) +- return -EFAULT; +- return 0; ++ struct pl2303_private *priv = port->private; ++ unsigned int mcr = priv->line_control; ++ unsigned int result; ++ ++ result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) ++ | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0); ++ ++ dbg("%s - result = %x", __FUNCTION__, result); ++ ++ if (copy_to_user(value, &result, sizeof(int))) ++ return -EFAULT; ++ return 0; + } ++/* end of 2.4.20 kernel part - grsch */ + + static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) + { +- struct pl2303_private *priv = usb_get_serial_port_data(port); ++ struct pl2303_private *priv = port->private; + unsigned long flags; + unsigned int prevstatus; + unsigned int status; +@@ -617,21 +647,10 @@ + dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd); + + switch (cmd) { +- +- case TIOCMGET: +- dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); +- return get_modem_info (port, (unsigned int *)arg); +- +- case TIOCMBIS: +- case TIOCMBIC: +- case TIOCMSET: +- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, port->number); +- return set_modem_info(port, cmd, (unsigned int *) arg); +- + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + return wait_modem_info(port, arg); +- ++ + default: + dbg("%s not supported = 0x%04x", __FUNCTION__, cmd); + break; +@@ -652,7 +671,7 @@ + state = BREAK_OFF; + else + state = BREAK_ON; +- dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); ++ dbg("%s - turning break %s", state==BREAK_OFF ? "off" : "on", __FUNCTION__); + + result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), + BREAK_REQUEST, BREAK_REQUEST_TYPE, state, +@@ -669,8 +688,8 @@ + dbg("%s", __FUNCTION__); + + for (i = 0; i < serial->num_ports; ++i) { +- kfree (usb_get_serial_port_data(&serial->port[i])); +- usb_set_serial_port_data(&serial->port[i], NULL); ++ kfree (serial->port[i].private); ++ serial->port[i].private = NULL; + } + } + +@@ -678,16 +697,14 @@ + static void pl2303_read_int_callback (struct urb *urb) + { + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; +- struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); +- struct pl2303_private *priv = usb_get_serial_port_data(port); ++ struct pl2303_private *priv = port->private; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; ++ int status; + u8 uart_state; + + dbg("%s (%d)", __FUNCTION__, port->number); + +- /* ints auto restart... */ +- + switch (urb->status) { + case 0: + /* success */ +@@ -700,17 +717,14 @@ + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); +- return; ++ goto exit; + } + +- if (!serial) { +- return; +- } + +- usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer); ++ usb_serial_debug_data(__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer); + + if (urb->actual_length < UART_STATE) +- return; ++ goto exit; + + /* Save off the uart status for others to look at */ + uart_state = data[UART_STATE]; +@@ -718,17 +732,19 @@ + uart_state |= (priv->line_status & UART_STATE_TRANSIENT_MASK); + priv->line_status = uart_state; + spin_unlock_irqrestore(&priv->lock, flags); +- wake_up_interruptible (&priv->delta_msr_wait); +- +- return; ++ ++exit: ++ status = usb_submit_urb (urb); ++ if (status) ++ err("%s - usb_submit_urb failed with result %d\n", ++ __FUNCTION__, status); + } + + + static void pl2303_read_bulk_callback (struct urb *urb) + { + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; +- struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); +- struct pl2303_private *priv = usb_get_serial_port_data(port); ++ struct pl2303_private *priv = port->private; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; +@@ -737,16 +753,8 @@ + u8 status; + char tty_flag; + +- if (port_paranoia_check (port, __FUNCTION__)) +- return; +- + dbg("%s - port %d", __FUNCTION__, port->number); + +- if (!serial) { +- dbg("%s - bad serial pointer, exiting", __FUNCTION__); +- return; +- } +- + if (urb->status) { + dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + if (!port->open_count) { +@@ -757,17 +765,17 @@ + /* PL2303 mysteriously fails with -EPROTO reschedule the read */ + dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); + urb->status = 0; +- urb->dev = serial->dev; ++ urb->dev = port->serial->dev; + result = usb_submit_urb(urb); + if (result) +- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); ++ err("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + return; + } + dbg("%s - unable to handle the error, exiting.", __FUNCTION__); + return; + } + +- usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data); ++ usb_serial_debug_data(__FILE__, __FUNCTION__, urb->actual_length, data); + + /* get tty_flag from status */ + tty_flag = TTY_NORMAL; +@@ -776,7 +784,7 @@ + status = priv->line_status; + priv->line_status &= ~UART_STATE_TRANSIENT_MASK; + spin_unlock_irqrestore(&priv->lock, flags); +- wake_up_interruptible (&priv->delta_msr_wait); //AF from 2.6 ++ wake_up_interruptible (&priv->delta_msr_wait); + + /* break takes precedence over parity, */ + /* which takes precedence over framing errors */ +@@ -805,10 +813,10 @@ + + /* Schedule the next read _if_ we are still open */ + if (port->open_count) { +- urb->dev = serial->dev; ++ urb->dev = port->serial->dev; + result = usb_submit_urb(urb); + if (result) +- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); ++ err("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + } + + return; +@@ -821,44 +829,32 @@ + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + int result; + +- if (port_paranoia_check (port, __FUNCTION__)) +- return; +- + dbg("%s - port %d", __FUNCTION__, port->number); + + if (urb->status) { + /* error in the urb, so we have to resubmit it */ +- if (serial_paranoia_check (port->serial, __FUNCTION__)) { +- return; +- } + dbg("%s - Overflow in write", __FUNCTION__); + dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + port->write_urb->transfer_buffer_length = 1; + port->write_urb->dev = port->serial->dev; + result = usb_submit_urb (port->write_urb); + if (result) +- err("%s - failed resubmitting write urb, error %d", __FUNCTION__, result); ++ err("%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result); + + return; + } + +- queue_task(&port->tqueue, &tq_immediate); +- mark_bh(IMMEDIATE_BH); + +- return; ++ queue_task(&port->tqueue, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); + } + + + static int __init pl2303_init (void) + { +- int retval; +- retval = usb_serial_register(&pl2303_device); +- if (retval) +- goto failed_usb_serial_register; ++ usb_serial_register(&pl2303_device); + info(DRIVER_DESC " " DRIVER_VERSION); + return 0; +-failed_usb_serial_register: +- return retval; + } + + +@@ -877,3 +873,4 @@ + MODULE_PARM(debug, "i"); + MODULE_PARM_DESC(debug, "Debug enabled or not"); + ++//this is an error +diff -rNu linux-2.4.29.old/drivers/usb/serial/pl2303.h linux-2.4.29/drivers/usb/serial/pl2303.h +--- linux-2.4.29.old/drivers/usb/serial/pl2303.h 2005-03-22 14:48:04.000000000 +0100 ++++ linux-2.4.29/drivers/usb/serial/pl2303.h 2005-03-22 15:33:05.758939856 +0100 +@@ -41,3 +41,12 @@ + + #define SITECOM_VENDOR_ID 0x6189 + #define SITECOM_PRODUCT_ID 0x2068 ++ ++/* Alcatel OT535/735 USB cable */ ++#define ALCATEL_VENDOR_ID 0x11f7 ++#define ALCATEL_PRODUCT_ID 0x02df ++ ++/* Samsung I330 phone cradle */ ++#define SAMSUNG_VENDOR_ID 0x04e8 ++#define SAMSUNG_PRODUCT_ID 0x8001 ++ -- cgit v1.2.3