From 2cea1e6b9aa20af4040e87e88f9d4d2017cc2233 Mon Sep 17 00:00:00 2001 From: wbx Date: Wed, 16 Mar 2005 13:50:00 +0000 Subject: add all source code from linksys/broadcom which is free, to cvs for better maintainence inside openwrt. this gives us the ability to better support different hardware models, without changing any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@379 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../package/linux/kernel-source/include/sbpcmcia.h | 139 +++++++++++++++++++++ 1 file changed, 139 insertions(+) create mode 100644 openwrt/package/linux/kernel-source/include/sbpcmcia.h (limited to 'openwrt/package/linux/kernel-source/include/sbpcmcia.h') diff --git a/openwrt/package/linux/kernel-source/include/sbpcmcia.h b/openwrt/package/linux/kernel-source/include/sbpcmcia.h new file mode 100644 index 000000000..2493d8c7a --- /dev/null +++ b/openwrt/package/linux/kernel-source/include/sbpcmcia.h @@ -0,0 +1,139 @@ +/* + * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. + * + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ + +#ifndef _SBPCMCIA_H +#define _SBPCMCIA_H + + +/* All the addresses that are offsets in attribute space are divided + * by two to account for the fact that odd bytes are invalid in + * attribute space and our read/write routines make the space appear + * as if they didn't exist. Still we want to show the original numbers + * as documented in the hnd_pcmcia core manual. + */ + +/* PCMCIA Function Configuration Registers */ +#define PCMCIA_FCR (0x700 / 2) + +#define FCR0_OFF 0 +#define FCR1_OFF (0x40 / 2) +#define FCR2_OFF (0x80 / 2) +#define FCR3_OFF (0xc0 / 2) + +#define PCMCIA_FCR0 (0x700 / 2) +#define PCMCIA_FCR1 (0x740 / 2) +#define PCMCIA_FCR2 (0x780 / 2) +#define PCMCIA_FCR3 (0x7c0 / 2) + +/* Standard PCMCIA FCR registers */ + +#define PCMCIA_COR 0 + +#define COR_RST 0x80 +#define COR_LEV 0x40 +#define COR_IRQEN 0x04 +#define COR_BLREN 0x01 +#define COR_FUNEN 0x01 + + +#define PCICIA_FCSR (2 / 2) +#define PCICIA_PRR (4 / 2) +#define PCICIA_SCR (6 / 2) +#define PCICIA_ESR (8 / 2) + + +#define PCM_MEMOFF 0x0000 +#define F0_MEMOFF 0x1000 +#define F1_MEMOFF 0x2000 +#define F2_MEMOFF 0x3000 +#define F3_MEMOFF 0x4000 + +/* Memory base in the function fcr's */ +#define MEM_ADDR0 (0x728 / 2) +#define MEM_ADDR1 (0x72a / 2) +#define MEM_ADDR2 (0x72c / 2) + +/* PCMCIA base plus Srom access in fcr0: */ +#define PCMCIA_ADDR0 (0x072e / 2) +#define PCMCIA_ADDR1 (0x0730 / 2) +#define PCMCIA_ADDR2 (0x0732 / 2) + +#define MEM_SEG (0x0734 / 2) +#define SROM_CS (0x0736 / 2) +#define SROM_DATAL (0x0738 / 2) +#define SROM_DATAH (0x073a / 2) +#define SROM_ADDRL (0x073c / 2) +#define SROM_ADDRH (0x073e / 2) + +/* Values for srom_cs: */ +#define SROM_IDLE 0 +#define SROM_WRITE 1 +#define SROM_READ 2 +#define SROM_WEN 4 +#define SROM_WDS 7 +#define SROM_DONE 8 + +/* CIS stuff */ + +/* The CIS stops where the FCRs start */ +#define CIS_SIZE PCMCIA_FCR + +/* Standard tuples we know about */ + +#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ +#define CISTPL_FUNCE 0x22 /* Function extensions */ +#define CISTPL_CFTABLE 0x1b /* Config table entry */ + +/* Function extensions for LANs */ + +#define LAN_TECH 1 /* Technology type */ +#define LAN_SPEED 2 /* Raw bit rate */ +#define LAN_MEDIA 3 /* Transmission media */ +#define LAN_NID 4 /* Node identification (aka MAC addr) */ +#define LAN_CONN 5 /* Connector standard */ + + +/* CFTable */ +#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ +#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ +#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ + +/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll + * take one for HNBU, and use "extensions" (a la FUNCE) within it. + */ + +#define CISTPL_BRCM_HNBU 0x80 + +/* Subtypes of BRCM_HNBU: */ + +#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & + * device id and chiprev + */ +#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ +#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */ +#define HNBU_OEM 0x04 /* Eight bytes OEM data */ +#define HNBU_CC 0x05 /* Default country code */ +#define HNBU_AA 0x06 /* Antennas available */ +#define HNBU_AG 0x07 /* Antenna gain */ +#define HNBU_BOARDFLAGS 0x08 /* board flags */ +#define HNBU_LED 0x09 /* LED set */ + + +/* sbtmstatelow */ +#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ +#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ + +/* sbtmstatehigh */ +#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ + +#endif /* _SBPCMCIA_H */ -- cgit v1.2.3