From 8a4bc2d124378688101735af8717104409685ac7 Mon Sep 17 00:00:00 2001 From: kaloz Date: Fri, 20 May 2005 14:03:03 +0000 Subject: added Linksys WRT54GS v1.1 docs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@988 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt (limited to 'openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt') diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt new file mode 100644 index 000000000..325f4cd73 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt @@ -0,0 +1,21 @@ +Linksys WRT54GS v1.1 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 + +CPU: BCM4712 at 216 MHz +RAM: 32 MB +Flash: 8 MB +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +serial port possible +JTAG interface + +List of files: +nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed +cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30) +pci.txt: contents of /proc/pci (2.4.30) +dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg) + +Notes: +CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load. -- cgit v1.2.3