From 59dd24394e690fa61339531978df21e07b956153 Mon Sep 17 00:00:00 2001 From: juhosg Date: Mon, 4 Apr 2011 08:42:58 +0000 Subject: mac80211: add WLAN LED support for Ralink RT305x SoC Devices This patch adds WLAN LED support to the mac80211 driver for Ralink rt2x00/rt2800 (rt305x) SoC devices. The current driver in kmod-rt2800-lib is based upon PCI, not SoC. The WLAN LED drivers in rt2800lib.c set the LED brightness via an MCU request, but do nothing for SoC. This patch checks for SoC and sets the register to enable the WLAN LED (instead of an MCU request). This fixes the WLAN LED for RT305x devices (such as the HW550-3G). Signed-off-by: Layne Edwards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26463 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- mac80211/patches/620-rt2x00_soc_led_support.patch | 75 +++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 mac80211/patches/620-rt2x00_soc_led_support.patch (limited to 'mac80211/patches/620-rt2x00_soc_led_support.patch') diff --git a/mac80211/patches/620-rt2x00_soc_led_support.patch b/mac80211/patches/620-rt2x00_soc_led_support.patch new file mode 100644 index 000000000..2b87b346d --- /dev/null +++ b/mac80211/patches/620-rt2x00_soc_led_support.patch @@ -0,0 +1,75 @@ +--- a/drivers/net/wireless/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/rt2x00/rt2800lib.c +@@ -935,6 +935,7 @@ + static void rt2800_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) + { ++ u32 reg; + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; +@@ -947,24 +948,46 @@ + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + +- if (led->type == LED_TYPE_RADIO) { +- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, +- enabled ? 0x20 : 0); +- } else if (led->type == LED_TYPE_ASSOC) { +- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, +- enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); +- } else if (led->type == LED_TYPE_QUALITY) { +- /* +- * The brightness is divided into 6 levels (0 - 5), +- * The specs tell us the following levels: +- * 0, 1 ,3, 7, 15, 31 +- * to determine the level in a simple way we can simply +- * work with bitshifting: +- * (1 << level) - 1 +- */ +- rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, +- (1 << brightness / (LED_FULL / 6)) - 1, +- polarity); ++ /* Check for SoC (SOC devices don't support MCU requests) */ ++ if (rt2x00_is_soc(led->rt2x00dev)) { ++ rt2800_register_read(led->rt2x00dev, LED_CFG, ®); ++ ++ /* Set LED Polarity */ ++ rt2x00_set_field32(®, LED_CFG_LED_POLAR, polarity); ++ ++ /* Set LED Mode */ ++ if (led->type == LED_TYPE_RADIO) { ++ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, ++ enabled ? 3 : 0); ++ } else if (led->type == LED_TYPE_ASSOC) { ++ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, ++ enabled ? 3 : 0); ++ } else if (led->type == LED_TYPE_QUALITY) { ++ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, ++ enabled ? 3 : 0); ++ } ++ rt2800_register_write(led->rt2x00dev, LED_CFG, reg); ++ } ++ else { ++ if (led->type == LED_TYPE_RADIO) { ++ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, ++ enabled ? 0x20 : 0); ++ } else if (led->type == LED_TYPE_ASSOC) { ++ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, ++ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); ++ } else if (led->type == LED_TYPE_QUALITY) { ++ /* ++ * The brightness is divided into 6 levels (0 - 5), ++ * The specs tell us the following levels: ++ * 0, 1 ,3, 7, 15, 31 ++ * to determine the level in a simple way we can simply ++ * work with bitshifting: ++ * (1 << level) - 1 ++ */ ++ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, ++ (1 << brightness / (LED_FULL / 6)) - 1, ++ polarity); ++ } + } + } + -- cgit v1.2.3