From c4ce6af0a07a0ef041fcfd09125cc0557894722d Mon Sep 17 00:00:00 2001 From: nbd Date: Fri, 2 Mar 2007 15:48:29 +0000 Subject: add support for static routes - based on the patch from #1365 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6457 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- docs/network.tex | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'docs/network.tex') diff --git a/docs/network.tex b/docs/network.tex index 41febef8a..7d811ba7f 100644 --- a/docs/network.tex +++ b/docs/network.tex @@ -54,6 +54,24 @@ PPP based protocols (\texttt{pppoe}, \texttt{pptp}, ...) accept these options: For all protocol types, you can also specify the MTU by using the \texttt{mtu} option. +\subsubsection{Setting up static routes} + +You can set up static routes for a specific interface that will be brought up +after the interface is configured. + +Simply add a config section like this: + +\begin{Verbatim} +config route foo + option interface lan + option target 1.1.1.0 + option netmask 255.255.255.0 + option gateway 192.168.1.1 +\end{Verbatim} + +The name for the route section is optional, the \texttt{interface}, \texttt{target} and +\texttt{gateway} options are mandatory. +Leaving out the \texttt{netmask} option will turn the route into a host route. \subsubsection{Setting up the switch (currently broadcom only)} -- cgit v1.2.3