From dfe52f0a791b7f715dabfc7c64c08a7d2d423e8b Mon Sep 17 00:00:00 2001 From: nbd Date: Fri, 13 Oct 2006 22:41:34 +0000 Subject: add initial version of our new documentation - not too pretty yet, but will be improved git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5060 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- docs/network-scripts.txt | 52 ------------------------------------------------ 1 file changed, 52 deletions(-) delete mode 100644 docs/network-scripts.txt (limited to 'docs/network-scripts.txt') diff --git a/docs/network-scripts.txt b/docs/network-scripts.txt deleted file mode 100644 index 024161bde..000000000 --- a/docs/network-scripts.txt +++ /dev/null @@ -1,52 +0,0 @@ - Structure of the network scripts in buildroot-ng - - -1) Usage - -To be able to access the network functions, you need to include -the necessary shell scripts by running: - -. /etc/functions.sh # common functions -include /lib/network # include /lib/network/*.sh -scan_interfaces # read and parse the network config - -Some protocols, such as PPP might change the configured interface names -at run time (e.g. eth0 => ppp0 for PPPoE). That's why you have to run -scan_interfaces instead of reading the values from the config directly. -After running scan_interfaces, the 'ifname' option will always contain -the effective interface name (which is used for IP traffic) and if the -physical device name differs from it, it will be stored in the 'device' -option. -That means that running 'config_get lan ifname' after scan_interfaces -might not return the same result as running it before. - -After running scan_interfaces, the following functions are available: - -- find_config looks for a network configuration that includes - the specified network interface. - -- setup_interface [] [] will set up the - specified interface, optionally overriding the network configuration - name or the protocol that it uses. - - - -2) Writing protocol handlers - -You can add custom protocol handlers by adding shell scripts to -/lib/network. They provide the following two shell functions: - -scan_() { - local config="$1" - # change the interface names if necessary -} - -setup_interface_() { - local interface="$1" - local config="$2" - # set up the interface -} - -scan_ is optional and only necessary if your protocol -uses a custom device, e.g. a tunnel or a PPP device. - -- cgit v1.2.3