From e2b4e6a9873d6e53d5b51e527b58ea3a1aa60532 Mon Sep 17 00:00:00 2001 From: nbd Date: Wed, 20 Sep 2006 16:51:34 +0000 Subject: remove old junk from docs/, add some info about the network config format git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4805 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt | 117 ---------------------- 1 file changed, 117 deletions(-) delete mode 100644 docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt (limited to 'docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt') diff --git a/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt b/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt deleted file mode 100644 index ee7151d22..000000000 --- a/docs/hardware/linksys/wrt54g_v22/dmesg-2_4_29.txt +++ /dev/null @@ -1,117 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 -Determined physical RAM map: -memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.06 BogoMIPS -Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x2000,blocks=8 -1: offset=0x10000,size=0x10000,blocks=63 -Using word write method -Flash device: 0x400000 at 0x1c000000 -Physically mapped flash: squashfs filesystem found at block 946 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000ec990-0x001ceb48 : "rootfs" -mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only -0x003f0000-0x00400000 : "nvram" -0x001d0000-0x003f0000 : "OpenWrt" -sflash: found no supported devices -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000708 -using v1 hardware -led -> 00 -led -> 01 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=0 -5325E VLAN programming for BCM5325E-MDIO I/F switch -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -1:(0x13) value=0x001e -2:(0x13) value=0x001e -1:(0x00) value=0x0000 -2:(0x00) value=0x0000 -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: Setting MAC address to 00 12 17 cc cd 25. -vlan1: add 01:00:5e:00:00:01 mcast address to master interface -led -> 00 - -- cgit v1.2.3