From f75a1c7f05a837f5d9ff3319353c12c81f8289b0 Mon Sep 17 00:00:00 2001 From: blogic Date: Wed, 3 Apr 2013 09:59:51 +0000 Subject: [ramips] add new image/Makefile Signed-off-by: John Crispin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36169 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/image/Makefile | 803 +++++++++++++------------------------ 1 file changed, 277 insertions(+), 526 deletions(-) diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 6ff1bb1bd..bb889219b 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -17,14 +17,16 @@ endef VMLINUX:=$(IMG_PREFIX)-vmlinux UIMAGE:=$(IMG_PREFIX)-uImage -fs_squash:=squashfs-only + ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - fs_squash:=initramfs - VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs - UIMAGE:=$(IMG_PREFIX)-uImage-initramfs +VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs +UIMAGE:=$(IMG_PREFIX)-uImage-initramfs +define Image/Build/Initramfs + $(call Image/Build/Profile/$(PROFILE),initramfs) +endef endif -ifeq ($(CONFIG_RALINK_RT288X),y) +ifeq ($(CONFIG_SOC_RT288X),y) define kernel_entry -a 0x88000000 -e 0x88000000 endef @@ -34,32 +36,6 @@ define kernel_entry endef endif -define mkcmdline -board=$(1) console=$(2),$(3) -endef - -define CompressLzma - $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2) -endef - -define PatchKernelLzma - cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))' - $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma) -endef - -define MkImage - $(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION))) - -mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\ - -n "$(imagename)" \ - -d $(2) $(3) -endef - -define MkImageLzma - $(call PatchKernelLzma,$(1),$(2)) - $(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3)) -endef - define MkCombineduImage $(call PatchKernelLzma,$(2),$(3)) if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \ @@ -72,269 +48,120 @@ define MkCombineduImage $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6)) endef -define CatFiles - if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ - echo "Warning: $(1) is too big" >&2; \ - else if [ `stat -c%s $(3)` -gt $(4) ]; then \ - echo "Warning: $(3) is too big" >&2; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - fi; fi -endef - -define Sysupgrade/KRuImage - $(eval output_name=$(if $(5),$(call imgname,$(1),$(2))-$(5),$(call sysupname,$(1),$(2)))) - $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(output_name)) -endef - -define mkmtd -mtdparts=$(1):$(2) -endef - -define mkmtd/phys -$(call mkmtd,physmap-flash.0,$(1)) -endef - -define mkmtd/spi -$(call mkmtd,spi0.0,$(1)) -endef - -define Image/BuildKernel - cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf - cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin - $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) - $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma) - cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin - $(call Image/Build/Initramfs) -endef - -define BuildFirmware/Generic - $(call MkImageLzma,$(2),$(3),$(6)) - $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5),$(7)) -endef - -define BuildFirmware/Generic/initramfs - $(call MkImageLzma,$(2),$(3)) - $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin -endef -mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) -define BuildFirmware/GENERIC_4M - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120,$(7),$(8)) -endef - -define BuildFirmware/GENERIC_4M/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M))) -endef - -mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) -kernel_size_8M=917504 -rootfs_size_8M=7143424 -define BuildFirmware/GENERIC_8M - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7),$(8)) -endef - -define BuildFirmware/GENERIC_8M/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M))) -endef - -define BuildFirmware/UIMAGE_8M - $(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7)) -endef - -mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware) -define BuildFirmware/3G6200N - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048) -endef - -mtdlayout_allnet_all5002=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),31424k(rootfs),32448k@0x50000(firmware) -define BuildFirmware/ALL5002 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002)),1048576,32178176) -endef - -define BuildFirmware/ALL5002/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002))) -endef - -mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) -mtd_argus_atp52b_kernel_part_size=1179648 -mtd_argus_atp52b_rootfs_part_size=6815744 -define BuildFirmware/ARGUS_ATP52B - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) -endef +# +# The real magic happens inside these templates +# -# djh - Note all of these are marked Read-Only for now -mtdlayout_broadway=192k(bootloader)ro,64k(config)ro,64k(factory)ro,1024k(kernel)ro,6720k(rootfs),7744k@0x50000(firmware) -mtd_broadway_kernel_part_size=1048576 -mtd_broadway_rootfs_part_size=6881280 -define BuildFirmware/BROADWAY - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)),$(mtd_broadway_kernel_part_size),$(mtd_broadway_rootfs_part_size),Broadway Kernel Image,factory.bin) - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)),$(mtd_broadway_kernel_part_size),$(mtd_broadway_rootfs_part_size)) +define MkImage + $(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION))) + -mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\ + -n "$(imagename)" \ + -d $(2) $(3) endef -define BuildFirmware/BROADWAY/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway))) +define CompressLzma + $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2) endef -define BuildFirmware/Buffalo - $(call MkImageLzma,$(2),$(3)) - $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - buffalo-enc -p $(3) -v 1.76 \ - -i $(KDIR)/vmlinux-$(2).uImage \ - -o $(KDIR)/vmlinux-$(2).uImage.enc; \ - buffalo-enc -p $(3) -v 1.76 \ - -i $(KDIR)/root.$(1) \ - -o $(KDIR)/root.$(2).enc; \ - buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \ - -l mlang8 -f 1 -r EU \ - -i $(KDIR)/vmlinux-$(2).uImage.enc \ - -i $(KDIR)/root.$(2).enc \ - -o $(call imgname,$(1),$(2))-factory-EU.bin; \ +define MkImageSysupgrade/squashfs + $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin) + cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name) + $(call prepare_generic_squashfs,$(KDIR)/$(output_name)) + if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \ + echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \ + else \ + $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \ fi endef - -define BuildFirmware/Buffalo2 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6)) -endef - -mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) -mtd_dir300b1_kernel_part_size=917504 -mtd_dir300b1_rootfs_part_size=2949120 -define BuildFirmware/DIR300B1 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) - -mkwrgimg -s $(4) -d /dev/mtdblock/2 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.bin -endef - -define BuildFirmware/DIR300B1/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) -endef - -mtdlayout_dir615h1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) -define BuildFirmware/DIR615H1 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)),917504,2949120) - -mkdir615h1 -e $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.bin -endef - -define BuildFirmware/DIR615H1/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1))) +define PatchKernelLzmaDtb + cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1) + $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts + $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(2).dtb + $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma) endef -mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware) -mtd_dap1350_kernel_part_size=1114112 -mtd_dap1350_rootfs_part_size=6553600 -define BuildFirmware/DAP1350 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size)) - -mkdapimg -s $(4) \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.bin +define MkImageLzmaDtb + $(call PatchKernelLzmaDtb,$(1),$(2)) + $(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3)) endef -define BuildFirmware/DAP1350/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size)) +define BuildFirmware/OF + $(call MkImageLzmaDtb,$(2),$(3),$(5)) + $(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6)) endef -mtdlayout_dir620a1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) -kernel_size_dir620a1=917504 -rootfs_size_dir620a1=7143424 -define BuildFirmware/DIR620A1 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1),DIR_620) +define BuildFirmware/OF/initramfs + $(call MkImageLzmaDtb,$(2),$(3)) + $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin endef -define BuildFirmware/DIR620A1/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1)) -endef -define BuildFirmware/Edimax +# Build images for default ralink layout for 4MB flash +# kernel + roots = 0x3b0000 +# $(1) = squashfs/initramfs +# $(2) = lowercase board name +# $(3) = dts file +ralink_default_fw_size_4M=3866624 +BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M)) +BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) + +# Build images for default ralink layout for 8MB flash +# kernel + roots = 0x7b0000 +# $(1) = squashfs/initramfs +# $(2) = lowercase board name +# $(3) = dts file +ralink_default_fw_size_8M=8060928 +BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M)) +BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) + +# Build images for a custom sized flash layout +# $(1) = squashfs/initramfs +# $(2) = lowercase board name +# $(3) = dts file +# $(4) = kernel + rootfs size +BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6)) +BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) + +# wrappers for boards that have 4MB and 8MB versions +define BuildFirmware/DefaultDualSize/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M) + $(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M) +endef +define BuildFirmware/DefaultDualSize/initramfs + $(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M) + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M) +endef + +# Some boards need a special header inside the uImage to make them bootable +define BuildFirmware/CustomFlashFactory/squashfs + $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4)) + $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6)) +endef +BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) + +# sign an image to make it work with edimax tftp recovery +define BuildFirmware/Edimax/squashfs + $(call BuildFirmware/OF,$(1),$(2),$(3),$(4)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkedimaximg -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin \ - -s $(3) -m $(4) -f $(5) -S $(6); \ + -s $(5) -m $(6) -f $(7) -S $(8); \ fi endef +BuildFirmware/Edimax/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) -define BuildFirmware/BR6524N - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917484,2949120) - $(call BuildFirmware/Edimax,$(1),br6524n,CSYS,WNRA,0x50000,0xc00000) -endef - -mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware) -mtd_f5d8235_kernel_part_size=1572864 -mtd_f5d8235_rootfs_part_size=6356992 -define BuildFirmware/F5D8235 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) -endef - -define BuildFirmware/FONERA20N - $(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys) - $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000) -endef - -define BuildFirmware/FONERA20N/initramfs - $(call BuildFirmware/GENERIC_8M/initramfs,$(1),fonera20n,FONERA20N,ttyS1,57600,phys) -endef - -define BuildFirmware/RT-N13U - $(call BuildFirmware/GENERIC_8M,$(1),rt-n13u,RT-N13U,ttyS1,57600,phys) -endef - -mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware) -kernel_size_nw718=917504 -rootfs_size_nw718=2883584 -cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718)) -define BuildFirmware/NW718 - $(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718),ARA1B4NCRNW718;1,factory.bin) - $(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718)) -endef - -mtdlayout_omniembhpm=192k(u-boot)ro,64k(config)ro,64k(factory)ro,1024k(kernel),15040k(rootfs),16064k@0x50000(firmware) -kernel_size_omniembhpm=1048576 -rootfs_size_omniembhpm=15400960 -define BuildFirmware/OMNIEMBHPM - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/spi,$(mtdlayout_omniembhpm)),$(kernel_size_omniembhpm),$(rootfs_size_omniembhpm)) -endef - -define BuildFirmware/OMNIEMBHPM/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/spi,$(mtdlayout_omniembhpm))) -endef - -mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) -mtd_rtg32b1_kernel_part_size=917504 -mtd_rtg32b1_rootfs_part_size=2949120 -define BuildFirmware/RTG32B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size)) -endef - -mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) -mtd_rtn10plus_kernel_part_size=917504 -mtd_rtn10plus_rootfs_part_size=2949120 -define BuildFirmware/RTN10PLUS - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size)) -endef - -define BuildFirmware/Seama - $(call PatchKernelLzma,$(2),$(3)) - if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt $(4) ]; then \ - echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \ - else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(5) ]; then \ - echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \ +# build Seama header images +define BuildFirmware/Seama/squashfs + $(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M)) + cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp + if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt 8060864 ]; then \ + echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \ else \ + dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \ ( \ - dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=$(4) count=1 conv=sync; \ - ) > $(KDIR)/vmlinux-$(2).tmp; \ - $(STAGING_DIR_HOST)/bin/seama \ - -i $(KDIR)/vmlinux-$(2).tmp \ - -m "dev=/dev/mtdblock/2" -m "type=firmware"; \ - ( \ - dd if=$(KDIR)/vmlinux-$(2).tmp.seama; \ - dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ - ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \ - ( \ - dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=$(4) count=1 conv=sync; \ + dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ ) > $(KDIR)/vmlinux-$(2).tmp; \ $(STAGING_DIR_HOST)/bin/seama \ @@ -342,121 +169,59 @@ define BuildFirmware/Seama -m "dev=/dev/mtdblock/2" -m "type=firmware"; \ $(STAGING_DIR_HOST)/bin/seama \ -s $(call imgname,$(1),$(2))-factory.bin \ - -m "signature=$(6)" \ + -m "signature=$(4)" \ -i $(KDIR)/vmlinux-$(2).tmp.seama; \ - fi; fi -endef - -mtdlayout_dir645a1=192k(u-boot)ro,16k(u-boot-env)ro,16k(factory)ro,32k(nvram)ro,64k(devdata)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) -define BuildFirmware/DIR645 - $(call BuildFirmware/Seama,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir645a1)),917440,7143424,$(7)) + fi endef +BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) -define BuildFirmware/DIR645/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir645a1))) +# sign Buffalo images +define BuildFirmware/Buffalo + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + buffalo-enc -p $(3) -v 1.76 \ + -i $(KDIR)/vmlinux-$(2).uImage \ + -o $(KDIR)/vmlinux-$(2).uImage.enc; \ + buffalo-enc -p $(3) -v 1.76 \ + -i $(KDIR)/root.$(1) \ + -o $(KDIR)/root.$(2).enc; \ + buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \ + -l mlang8 -f 1 -r EU \ + -i $(KDIR)/vmlinux-$(2).uImage.enc \ + -i $(KDIR)/root.$(2).enc \ + -o $(call imgname,$(1),$(2))-factory-EU.bin; \ + fi endef -define BuildFirmware/UMedia - $(call BuildFirmware/GENERIC_8M,$(1),$(2),$(3),ttyS1,57600,phys) +# sign trednet / UMedia images +define BuildFirmware/UMedia/squashfs + $(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ fix-u-media-header -T 0x46 -B $(4) \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin; \ fi endef +BuildFirmware/UMedia/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) -define BuildFirmware/UMedia/initramfs - $(call BuildFirmware/GENERIC_8M/initramfs,$(1),$(2),$(3),ttyS1,57600,phys) -endef - -mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) -define BuildFirmware/WHRG300N - $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys) - $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088) - ( \ - echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ - dd bs=512 count=1 conv=sync; \ - dd if=$(call sysupname,$(1),whr-g300n); \ - ) > $(KDIR)/whr-g300n-tftp.tmp - buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \ - -o $(call imgname,$(1),whr-g300n)-tftp.bin -endef - -mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash) -kernel_size_wl341v3=917504 -rootfs_size_wl341v3=2949120 -define BuildFirmware/WL341V3 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - dd if=/dev/zero bs=195936 count=1; \ - echo "1.01"; \ - dd if=/dev/zero bs=581 count=1; \ - echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ - dd if=/dev/zero bs=65552 count=1; \ - dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ - dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ - echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ - ) > $(call imgname,$(1),$(2))-factory.bin; \ - fi -endef - -mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware) -define BuildFirmware/WLITX4AG300N - $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584) -endef - -mtdlayout_mzkw300nh2=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2816k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware) -kernel_size_mzkw300nh2=851968 -rootfs_size_mzkw300nh2=2883584 -define BuildFirmware/MZKW300NH2 - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_mzkw300nh2)),$(kernel_size_mzkw300nh2),$(rootfs_size_mzkw300nh2)) - $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,`expr $(kernel_size_mzkw300nh2) - 20`,$(KDIR)/root.$(1),$(rootfs_size_mzkw300nh2),$(call imgname,$(1),$(2))-factory.bin) - -mkedimaximg -i $(call imgname,$(1),$(2))-factory.bin \ - -o $(call imgname,$(1),$(2))-factory.bin \ - -s CSYS -m RN52 -f 0x50000 -S 0xc0000; -endef - -define BuildFirmware/MZKW300NH2/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_mzkw300nh2))) -endef - -# -# Templates -# -define Image/Build/Template/initramfs/initramfs - $(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8)) -endef -define Image/Build/Template/squashfs-only/squashfs - $(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8)) -endef # # RT288X Profiles # -define Image/Build/Profile/F5D8235V1 - $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1) -endef -define Image/Build/Profile/BR6524N - $(call Image/Build/Template/$(fs_squash)/$(1),BR6524N,br6524n,BR6524N,ttyS1,57600,phys) -endef +# 0x790000 +belkin_f5d8235v1_mtd_size=7929856 +Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size)) -define Image/Build/Profile/RTN15 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys) -endef +Image/Build/Profile/BR6524N=$(call BuildFirmware/Edimax/$(1),$(1),br6524n,BR6524N,$(ralink_default_fw_size_4M),CSYS,WNRA,0x50000,0xc0000) -define Image/Build/Profile/V11STFE - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys) -endef +Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RTN15) -define Image/Build/Profile/WLITX4AG300N - $(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N) -endef +Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE) + +Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N) -ifeq ($(CONFIG_RALINK_RT288X),y) +ifeq ($(SUBTARGET),rt288x) define Image/Build/Profile/Default $(call Image/Build/Profile/F5D8235V1,$(1)) $(call Image/Build/Profile/BR6524N,$(1)) @@ -466,190 +231,170 @@ define Image/Build/Profile/Default endef endif + + # # RT305X Profiles # -define Image/Build/Profile/3G6200N - $(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys) -endef -define Image/Build/Profile/3G300M - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,3g300m,3G300M,ttyS1,57600,spi,3G150M_SPI Kernel Image,factory.bin) - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,3g300m,3G300M,ttyS1,57600,spi) -endef +edimax_3g6200n_mtd_size=3735552 +Image/Build/Profile/3G6200N=$(call BuildFirmware/CustomFlash/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size)) -define Image/Build/Profile/AIR3GII - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,air3gii,AIR3GII,ttyS1,57600,spi) -endef +Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory) + +Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII) +define BuildFirmware/UIMAGE_8M + $(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7)) +endef define Image/Build/Profile/ALL02393G - $(call Image/Build/Template/$(fs_squash)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys) + $(call Image/Build/Template/$(image_type)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys) endef -define Image/Build/Profile/ALL0256N - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi) - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,all0256n-8M,ALL0256N,ttyS1,57600,spi) -endef +Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0256n,ALL0256N) -define Image/Build/Profile/ALL5002 - $(call Image/Build/Template/$(fs_squash)/$(1),ALL5002,all5002,ALL5002,ttyS1,57600,spi) -endef +allnet_all5002_mtd_size=33226752 +Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size)) -define Image/Build/Profile/ARGUS_ATP52B - $(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B) -endef +argus_atp52b_mtd_size=7995392 +Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size)) -define Image/Build/Profile/BC2 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys) -endef +Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2) -define Image/Build/Profile/BROADWAY - $(call Image/Build/Template/$(fs_squash)/$(1),BROADWAY,broadway,BROADWAY,ttyS1,57600,phys) -endef +broadway_mtd_size=7929856 +Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),broadway,BROADWAY,$(broadway_mtd_size),Broadway Kernel Image,factory) -define Image/Build/Profile/CARAMBOLA - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,carambola,CARAMBOLA,ttyS1,115200,phys) -endef +Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA) -define Image/Build/Profile/DIR300B1 - $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) - $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) - $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b) - $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d) - $(call Image/Build/Template/$(fs_squash)/$(1),DIR620A1,dir-620-a1,DIR-620-A1) +define BuildFirmware/DIR300B1/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) + -mkwrgimg -s $(4) -d /dev/mtdblock/2 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.bin endef +BuildFirmware/DIR300B1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) +Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) +Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) +Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b) +Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d) -define Image/Build/Profile/DIR615H1 - $(call Image/Build/Template/$(fs_squash)/$(1),DIR615H1,dir-615-h1,DIR-615-H1,ttyS1,57600,spi) -endef +Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1) -define Image/Build/Profile/DAP1350 - $(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3) +define BuildFirmware/DIR615H1/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1) + -mkdir615h1 -e $(call sysupname,$(1),dir-615-h1) \ + -o $(call imgname,$(1),dir-615-h1)-factory.bin endef +BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1) +Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1)) -define Image/Build/Profile/ESR9753 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys) +dap1350_mtd_size=7667712 +define BuildFirmware/DAP1350/squashfs + $(call BuildFirmware/CustomFlash/$(1),$(1),dap-1350,DAP-1350,$(dap1350_mtd_size)) + -mkdapimg -s $(4) \ + -i $(call sysupname,$(1),dap-1350) \ + -o $(call imgname,$(1),dap-1350)-factory.bin endef +BuildFirmware/DAP1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dap-1350,DAP-1350) +Image/Build/Profile/DAP1350=$(call BuildFirmware/DAP1350/$(1),$(1),) -define Image/Build/Profile/HW5503G - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys) -endef +Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753) -define Image/Build/Profile/F5D8235V2 - $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2) -endef +Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G) -define Image/Build/Profile/FONERA20N - $(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N) -endef +belkin_f5d8235v2_mtd_size=7929856 +Image/Build/Profile/F5D8235V2=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v2,F5D8235_V2,$(belkin_f5d8235v2_mtd_size)) -define Image/Build/Profile/RT-N13U - $(call Image/Build/Template/$(fs_squash)/$(1),RT-N13U) -endef +Image/Build/Profile/FONERA20N=$(call BuildFirmware/Edimax/$(1),$(1),fonera20n,FONERA20N,$(ralink_default_fw_size_8M),RSDK,NL1T,0x50000,0xc0000) -define Image/Build/Profile/FREESTATION5 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,freestation5,FREESTATION5,ttyS1,115200,phys) -endef +Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U) -define Image/Build/Profile/MOFI35003GN - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys) -endef +Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5) -define Image/Build/Profile/NBG419N - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG-419N,ttyS1,57600,phys) -endef +Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN) -define Image/Build/Profile/MZKW3000NH2 - $(call Image/Build/Template/$(fs_squash)/$(1),MZKW300NH2,mzk-w300nh2,MZK-W300NH2,ttyS1,57600,phys) -endef +Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N) -define Image/Build/Profile/NW718 - $(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718) -endef +Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000) -define Image/Build/Profile/OMNIEMB - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys) -endef +nw718_mtd_size=3801088 +Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) -define Image/Build/Profile/PSR680W - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,psr-680w,PSR-680W,ttyS1,115200,phys) -endef +Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB) -define Image/Build/Profile/PWH2004 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys) -endef +Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W) -define Image/Build/Profile/RTG32B1 - $(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1) -endef +Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004) -define Image/Build/Profile/RTN10PLUS - $(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS) -endef +Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1) -define Image/Build/Profile/SLR7205 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys) -endef +Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS) -define Image/Build/Profile/V22RW2X2 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys) -endef +Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205) -define Image/Build/Profile/W306R_V20 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys,linkn Kernel Image,factory.bin) - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) -endef +Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2) -define Image/Build/Profile/W502U - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys) -endef +Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory) -define Image/Build/Profile/WCR150GN - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys) -endef +Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U) -define Image/Build/Profile/WHRG300N - $(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N) -endef +Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN) -define Image/Build/Profile/WL_330N - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi) +buffalo_whrg300n_mtd_size=3801088 +define BuildFirmware/WHRG300N/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N) + # the following line has a bad argument 3 ... the old Makefile was already broken + $(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n) + ( \ + echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ + dd bs=512 count=1 conv=sync; \ + dd if=$(call sysupname,$(1),whr-g300n); \ + ) > $(KDIR)/whr-g300n-tftp.tmp + buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \ + -o $(call imgname,$(1),whr-g300n)-tftp.bin endef +BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N) +Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1)) -define Image/Build/Profile/WL_330N3G - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi) -endef +Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N) -define Image/Build/Profile/WL341V3 - $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3) -endef +Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G) -define Image/Build/Profile/WL351 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys) +kernel_size_wl341v3=917504 +rootfs_size_wl341v3=2949120 +define BuildFirmware/WL341V3/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),wl341v3,WL341V3) + # This code looks broken and really needs to be converted to C + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + dd if=/dev/zero bs=195936 count=1; \ + echo "1.01"; \ + dd if=/dev/zero bs=581 count=1; \ + echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ + dd if=/dev/zero bs=65552 count=1; \ + dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \ + dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ + dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ + echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ + ) > $(call imgname,$(1),$(2))-factory.bin; \ + fi endef +BuildFirmware/WL341V3/initramfs=$(call BuildFirmware/OF/initramfs,$(1),wl341v3,WL341V3) +Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1)) -define Image/Build/Profile/WR5123GN - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys) - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys) -endef +Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351) -define Image/Build/Profile/UPVEL_326 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,ur-326n4g,UR-326N4G,ttyS1,57600,phys) -endef +Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN) -define Image/Build/Profile/UPVEL - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,ur-336un,UR-336UN,ttyS1,57600,phys) -endef +Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G) -define Image/Build/Profile/WR6202 - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys) -endef +Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN) -define Image/Build/Profile/XDXRN502J - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys) -endef +Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202) + +Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J) -ifeq ($(CONFIG_RALINK_RT305X),y) +ifeq ($(SUBTARGET),rt305x) define Image/Build/Profile/Default $(call Image/Build/Profile/3G6200N,$(1)) $(call Image/Build/Profile/3G300M,$(1)) @@ -661,27 +406,31 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/BROADWAY,$(1)) $(call Image/Build/Profile/CARAMBOLA,$(1)) - $(call Image/Build/Profile/DIR300B1,$(1)) + $(call Image/Build/Profile/DIR-300-B1,$(1)) + $(call Image/Build/Profile/DIR-600-B1,$(1)) + $(call Image/Build/Profile/DIR-600-B2,$(1)) + $(call Image/Build/Profile/DIR-615-D,$(1)) + $(call Image/Build/Profile/DIR-620-A1,$(1)) $(call Image/Build/Profile/DIR615H1,$(1)) $(call Image/Build/Profile/DAP1350,$(1)) - $(call Image/Build/Profile/ESR9753,$(1)) + $(call Image/Build/Profile/ESR-9753,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) - $(call Image/Build/Profile/RTN10PLUS,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) - $(call Image/Build/Profile/RT-N13U,$(1)) $(call Image/Build/Profile/FREESTATION5,$(1)) - $(call Image/Build/Profile/HW5503G,$(1)) - $(call Image/Build/Profile/MOFI35003GN,$(1)) - $(call Image/Build/Profile/MZKW3000NH2,$(1)) - $(call Image/Build/Profile/NBG419N,$(1)) + $(call Image/Build/Profile/HW550-3G,$(1)) + $(call Image/Build/Profile/MOFI3500-3GN,$(1)) + $(call Image/Build/Profile/MZKW300NH2,$(1)) + $(call Image/Build/Profile/NBG-419N,$(1)) $(call Image/Build/Profile/NW718,$(1)) - $(call Image/Build/Profile/OMNIEMB,$(1)) - $(call Image/Build/Profile/UPVEL_326,$(1)) - $(call Image/Build/Profile/PSR680W,$(1)) + $(call Image/Build/Profile/OMNI-EMB,$(1)) + $(call Image/Build/Profile/PSR-680W,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) - $(call Image/Build/Profile/SLR7205,$(1)) - $(call Image/Build/Profile/V22RW2X2,$(1)) + $(call Image/Build/Profile/RTN10PLUS,$(1)) + $(call Image/Build/Profile/RT-N13U,$(1)) + $(call Image/Build/Profile/SL-R7205,$(1)) + $(call Image/Build/Profile/UR-326N4G,$(1)) + $(call Image/Build/Profile/V22RW-2X2,$(1)) $(call Image/Build/Profile/W306R_V20,$(1)) $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) @@ -689,37 +438,30 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WL_330N,$(1)) $(call Image/Build/Profile/WL_330N3G,$(1)) $(call Image/Build/Profile/WL341V3,$(1)) - $(call Image/Build/Profile/WL351,$(1)) - $(call Image/Build/Profile/WR5123GN,$(1)) + $(call Image/Build/Profile/WL-351,$(1)) + $(call Image/Build/Profile/WR512-3GN,$(1)) $(call Image/Build/Profile/WR6202,$(1)) $(call Image/Build/Profile/XDXRN502J,$(1)) endef endif + + # # RT3662/RT3883 Profiles # -define Image/Build/Profile/DIR645 - $(call Image/Build/Template/$(fs_squash)/$(1),DIR645,dir-645,DIR-645,ttyS1,57600,spi,wrgn39_dlob.hans_dir645) -endef +Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645) -define Image/Build/Profile/OMNIEMBHPM - $(call Image/Build/Template/$(fs_squash)/$(1),OMNIEMBHPM,omni-emb-hpm,OMNI-EMB-HPM) -endef +omniembhpm_mtd_size=16449536 +Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size)) -define Image/Build/Profile/RTN56U - $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,rt-n56u,RT-N56U,ttyS1,57600,phys) -endef +Image/Build/Profile/RTN56U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U) -define Image/Build/Profile/TEW691GR - $(call Image/Build/Template/$(fs_squash)/$(1),UMedia,tew-691gr,TEW-691GR,0x026910) -endef +Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910) -define Image/Build/Profile/TEW692GR - $(call Image/Build/Template/$(fs_squash)/$(1),UMedia,tew-692gr,TEW-692GR,0x026920) -endef +#Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920) -ifeq ($(CONFIG_RALINK_RT3883),y) +ifeq ($(SUBTARGET),rt3883) define Image/Build/Profile/Default $(call Image/Build/Profile/DIR645,$(1)) $(call Image/Build/Profile/OMNIEMBHPM,$(1)) @@ -729,14 +471,23 @@ define Image/Build/Profile/Default endef endif -define Image/Build/Initramfs - $(call Image/Build/Profile/$(PROFILE),initramfs) -endef +# +# Generic Targets +# define Image/Build/squashfs $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) endef +define Image/BuildKernel + cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf + cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin + $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) + $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma) + cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin + $(call Image/Build/Initramfs) +endef + define Image/Build $(call Image/Build/$(1)) dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -- cgit v1.2.3