From 8b22e86996d8fad13401da097cc5335097620fac Mon Sep 17 00:00:00 2001 From: kaloz Date: Wed, 10 Nov 2010 12:26:18 +0000 Subject: add a patch to fixup pcie reset on kirkwood - also fixes the boot issue on the wrt350n v2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23939 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../989-kirkwood_pcie_reset_fixup.patch | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 target/linux/generic/patches-2.6.36/989-kirkwood_pcie_reset_fixup.patch diff --git a/target/linux/generic/patches-2.6.36/989-kirkwood_pcie_reset_fixup.patch b/target/linux/generic/patches-2.6.36/989-kirkwood_pcie_reset_fixup.patch new file mode 100644 index 000000000..f8ecc303d --- /dev/null +++ b/target/linux/generic/patches-2.6.36/989-kirkwood_pcie_reset_fixup.patch @@ -0,0 +1,86 @@ +From 3924996bab2845bdf9a9d16ff7c20445de1ab55d Mon Sep 17 00:00:00 2001 +From: Nicolas Pitre +Date: Thu, 21 Oct 2010 15:48:33 -0400 +Subject: [PATCH] [ARM] Kirkwood: restrict the scope of the PCIe reset workaround + +Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the +reset of the PCIe unit unconditional. While this may fix problems on some +targets, this also causes problems on other targets. + +Saeed Bishara said about the original problem: "We +couln't pinpoint the root cause of this issue, actually we failed to +reproduce that issue." + +So let's restrict the reset of the PCIe unit only to the target where +the original problem was observed. + +Signed-off-by: Nicolas Pitre +--- + arch/arm/mach-kirkwood/ts41x-setup.c | 14 +++++++++++++- + arch/arm/plat-orion/include/plat/pcie.h | 3 +++ + arch/arm/plat-orion/pcie.c | 5 ----- + 3 files changed, 16 insertions(+), 6 deletions(-) + +--- a/arch/arm/mach-kirkwood/ts41x-setup.c ++++ b/arch/arm/mach-kirkwood/ts41x-setup.c +@@ -27,6 +27,10 @@ + #include "mpp.h" + #include "tsx1x-common.h" + ++/* for the PCIe reset workaround */ ++#include ++ ++ + #define QNAP_TS41X_JUMPER_JP1 45 + + static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { +@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void) + + static int __init ts41x_pci_init(void) + { +- if (machine_is_ts41x()) ++ if (machine_is_ts41x()) { ++ /* ++ * Without this explicit reset, the PCIe SATA controller ++ * (Marvell 88sx7042/sata_mv) is known to stop working ++ * after a few minutes. ++ */ ++ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); ++ + kirkwood_pcie_init(KW_PCIE0); ++ } + + return 0; + } +--- a/arch/arm/plat-orion/include/plat/pcie.h ++++ b/arch/arm/plat-orion/include/plat/pcie.h +@@ -11,12 +11,15 @@ + #ifndef __PLAT_PCIE_H + #define __PLAT_PCIE_H + ++struct pci_bus; ++ + u32 orion_pcie_dev_id(void __iomem *base); + u32 orion_pcie_rev(void __iomem *base); + int orion_pcie_link_up(void __iomem *base); + int orion_pcie_x4_mode(void __iomem *base); + int orion_pcie_get_local_bus_nr(void __iomem *base); + void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); ++void orion_pcie_reset(void __iomem *base); + void orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram); + int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, +--- a/arch/arm/plat-orion/pcie.c ++++ b/arch/arm/plat-orion/pcie.c +@@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iome + u32 mask; + + /* +- * soft reset PCIe unit +- */ +- orion_pcie_reset(base); +- +- /* + * Point PCIe unit MBUS decode windows to DRAM space. + */ + orion_pcie_setup_wins(base, dram); -- cgit v1.2.3