From 6623e9fd706ad3c7351e376b065b04c6e1595062 Mon Sep 17 00:00:00 2001
From: nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sun, 22 Mar 2009 20:19:23 +0000
Subject: atheros: in later kernels, vlan 0 no longer works as expected, switch
 to (1,2) instead of (0,1) for lan/wan

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 target/linux/atheros/base-files/etc/preinit.arch          | 6 +++---
 target/linux/atheros/base-files/etc/uci-defaults/network  | 4 ++--
 target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c | 8 +++++---
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/target/linux/atheros/base-files/etc/preinit.arch b/target/linux/atheros/base-files/etc/preinit.arch
index 26bbf2c52..9bda9cc75 100755
--- a/target/linux/atheros/base-files/etc/preinit.arch
+++ b/target/linux/atheros/base-files/etc/preinit.arch
@@ -4,8 +4,8 @@ grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
 	     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
 		vconfig set_name_type DEV_PLUS_VID_NO_PAD
 		ifconfig eth0 up
-		vconfig add eth0 0
-		ifname=eth0.0
+		vconfig add eth0 1
+		ifname=eth0.1
 	else
 		ifname=eth0
 	fi
@@ -15,7 +15,7 @@ grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
 	sleep 2
 	if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
 	     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-		vconfig rem eth0.0
+		vconfig rem eth0.1
 		ifconfig eth0 down
 	fi
 }
diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network
index 63bc5416b..fa9710940 100644
--- a/target/linux/atheros/base-files/etc/uci-defaults/network
+++ b/target/linux/atheros/base-files/etc/uci-defaults/network
@@ -2,9 +2,9 @@
 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
 	uci batch <<EOF
-set network.lan.ifname=eth0.0
+set network.lan.ifname=eth0.1
 set network.wan=interface
-set network.wan.ifname=eth0.1
+set network.wan.ifname=eth0.2
 set network.wan.proto=dhcp
 commit network
 EOF
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c b/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c
index 427bad405..9a85411e0 100644
--- a/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c
+++ b/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c
@@ -32,7 +32,7 @@
 
 /* Undefine this to use trailer mode instead.
  * I don't know if header mode works with all chips */
-#define HEADER_MODE	1
+//#define HEADER_MODE	1
 
 MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
 MODULE_AUTHOR("Felix Fietkau");
@@ -251,7 +251,7 @@ mvswitch_config_init(struct phy_device *pdev)
 
 	/* initialize default vlans */
 	for (i = 0; i < MV_PORTS; i++)
-		priv->vlans[(i == MV_WANPORT ? 1 : 0)] |= (1 << i);
+		priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
 
 	/* before entering reset, disable all ports */
 	for (i = 0; i < MV_PORTS; i++)
@@ -422,7 +422,9 @@ mvswitch_fixup(struct phy_device *dev)
 {
 	u16 reg;
 
-	/* look for the switch on the bus */
+	if (dev->addr != 0x10)
+		return 0;
+
 	reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
 	if (reg != MV_IDENT_VALUE)
 		return 0;
-- 
cgit v1.2.3