From 233a4cab5d3391af36717a57e79f1cfba3c3f9ea Mon Sep 17 00:00:00 2001 From: florian Date: Fri, 20 May 2011 10:06:22 +0000 Subject: [brcm63xx] add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/defconfig/D-4P-W/network | 14 +++++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 5 ++ target/linux/brcm63xx/image/Makefile | 4 +- .../patches-2.6.37/421-board-D4PW_correction.patch | 70 ++++++++++++++++++++++ 4 files changed, 91 insertions(+), 2 deletions(-) create mode 100644 target/linux/brcm63xx/base-files/etc/defconfig/D-4P-W/network create mode 100644 target/linux/brcm63xx/patches-2.6.37/421-board-D4PW_correction.patch diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/D-4P-W/network b/target/linux/brcm63xx/base-files/etc/defconfig/D-4P-W/network new file mode 100644 index 000000000..fa4844d1a --- /dev/null +++ b/target/linux/brcm63xx/base-files/etc/defconfig/D-4P-W/network @@ -0,0 +1,14 @@ +# Copyright (C) 2010 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 2c62928a5..d2ffabd17 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -59,6 +59,11 @@ brcm63xx_detect() { brcm63xx_has_reset_button="true" ifname=eth0 ;; + "bcm63xx/D-4P-W "*) + status_led="power:green" + brcm63xx_has_reset_button="true" + ifname=eth0 + ;; *) ;; esac diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index f1fa4f540..8b1577110 100644 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -189,8 +189,8 @@ define Image/Build $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN) # Belkin f5d7633 $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633) - # D-Link DSL-2640B - $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B) + # D-Link DSL-2640B, rev B2 + $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2) # D-Link DSL-2740B/DSL-2741B, rev C2 $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2) # D-Link DSL-2740B/DSL-2741B, rev C3 diff --git a/target/linux/brcm63xx/patches-2.6.37/421-board-D4PW_correction.patch b/target/linux/brcm63xx/patches-2.6.37/421-board-D4PW_correction.patch new file mode 100644 index 000000000..540626a0b --- /dev/null +++ b/target/linux/brcm63xx/patches-2.6.37/421-board-D4PW_correction.patch @@ -0,0 +1,70 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -522,42 +522,48 @@ static struct board_info __initdata boar + .name = "D-4P-W", + .expected_cpu_id = 0x6348, + +- .has_enet0 = 1, +- .has_enet1 = 1, ++ .has_enet1 = 1, + .has_pci = 1, +- +- .enet0 = { +- .has_phy = 1, +- .use_internal_phy = 1, +- }, ++ .has_uart0 = 1, ++ + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, +- }, +- +- .has_ohci0 = 1, +- .has_ehci0 = 1, ++ }, + + .leds = { + { +- .name = "ppp", ++ .name = "power:green", ++ .gpio = 0, ++ .active_low = 1, ++ }, ++ { ++ .name = "status", ++ .gpio = 3, ++ .active_low = 1, ++ }, ++ { ++ .name = "internet:green", + .gpio = 4, + .active_low = 1, + }, + { +- .name = "ppp-fail", ++ .name = "internet:red", + .gpio = 5, + .active_low = 1, +- }, ++ }, ++ }, ++ ++ .buttons = { + { +- .name = "power", +- .gpio = 0, ++ .desc = "reset", ++ .gpio = 7, + .active_low = 1, +- .default_trigger = "default-on", +- ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .threshold = 3, + }, + }, +- + }; + + static struct board_info __initdata board_spw500v = { -- cgit v1.2.3