summaryrefslogtreecommitdiffstats
path: root/tools/firmware-utils/src
Commit message (Collapse)AuthorAgeFilesLines
* [ramips] Add Netgear WNCE2001 (OF version)blogic2013-04-091-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: Add support for MR3420v2juhosg2013-03-111-0/+6
| | | | | | | | Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3441/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35963 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boardsjuhosg2013-02-251-0/+12
| | | | | | | Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35787 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1juhosg2013-02-131-0/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 supportjuhosg2013-02-021-0/+6
| | | | | | | | | AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35448 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools/firmware-utils] adds support for Edimax BR-6524Nblogic2013-01-062-0/+2
| | | | | | | | fixes #12754 Signed-off-by: <rq@akl.lt> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35019 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TL-MR3220 v2juhosg2012-12-191-0/+6
| | | | | | | | | | Based on the following patch: http://patchwork.openwrt.org/patch/3043/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34781 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mkfwimage2: allow to use numbers in partition namesjuhosg2012-12-171-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34729 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1juhosg2012-12-071-0/+6
| | | | | | | Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-WA7510Njuhosg2012-11-131-0/+6
| | | | | | | | | [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34189 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: new tool for fixing U-Media firmware headersjuhosg2012-10-181-0/+354
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add seama tooljuhosg2012-10-182-0/+637
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: move bcm_tag.h herejogo2012-10-081-1/+70
| | | | | | | Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add a new tool for TEW-712BR firmware generationjuhosg2012-08-221-0/+405
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33233 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] tools/firmware-utils/ptgen option to use MB roundingblogic2012-08-221-4/+18
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33218 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add tool for DIR-651-H1 firmware generationjuhosg2012-08-171-0/+410
| | | | | | Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33204 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] adds mkdapimgblogic2012-07-241-0/+191
| | | | | | Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32822 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: allow to specify firmware versionjuhosg2012-07-051-2/+23
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32616 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: imagetag: add parameter for padding imagesjogo2012-05-274-2/+64
| | | | | | | Allow images to be padded to a certain size. This prevents CFE from flashing them to the second image offset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31875 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TL-WR1041N v2juhosg2012-05-051-0/+6
| | | | | | Patch-by: Vince Huang <axishero@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31609 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mkfwimage: allow to override firmware magicjuhosg2012-02-181-5/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic2012-02-142-0/+351
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mkmylofw: add WPE72 supportjuhosg2012-01-262-0/+4
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firware-utils/mktplinkfw: add TL-WR2543N/ND supportjuhosg2012-01-071-0/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-WA701N/NDjuhosg2012-01-041-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-MR3020juhosg2012-01-041-0/+6
| | | | | | Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the imagejuhosg2011-12-151-1/+45
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layoutjuhosg2011-12-061-89/+125
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29466 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundaryjuhosg2011-12-051-14/+45
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29445 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: fix combined image creationjuhosg2011-12-031-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29409 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinfw: use htonl/ntohljuhosg2011-11-241-44/+39
| | | | | | Based on a patch by Adrian Chadd <adrian@freebsd.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29327 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add TL-WR741ND v4juhosg2011-11-011-0/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28707 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] Add firmware tool for generating factory images for Edimax devicesacinonyx2011-10-301-0/+259
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28688 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3juhosg2011-10-261-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28602 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-WR703N v1juhosg2011-09-211-0/+9
| | | | | | Patch-by: dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28278 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-WR743ND v1juhosg2011-09-211-0/+9
| | | | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28270 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for TL-WR740N v3juhosg2011-09-211-0/+9
| | | | | | Signed-off-by: Martin Raykov <martin.raykov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28268 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: rename the devname variable in mkwrgimg to avoid a clash ↵nbd2011-07-081-4/+4
| | | | | | with a BSD stdlib function git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add yet another buffalo tooljuhosg2011-07-061-0/+179
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27475 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: allow to create buffalo image from two filesjuhosg2011-07-062-17/+111
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: allow to create buffalo tags w/o hw versionjuhosg2011-07-061-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add new firmware tool for the DIR-300-B1 boardjuhosg2011-07-041-0/+240
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27438 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: fix build on big endian systemshauke2011-06-211-1/+1
| | | | | | | This closes #9446 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27255 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: fix buffalo csum calculationjuhosg2011-06-132-2/+4
| | | | | | Also print an error message if decryption fails. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27167 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add support for hd_id tag into mkdniimgjuhosg2011-05-311-4/+13
| | | | | | Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/firmware-utils: add buffalo specific fw toolsjuhosg2011-05-314-0/+1175
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27050 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add firmware helpers for T-Home Speedport W 303Vflorian2011-05-112-0/+377
| | | | | | | | | Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Move the OpenWrt rootfs length fieldcshore2011-04-154-35/+2
| | | | | | | | | | | | | | | | Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: fix endianness bugs in firmware generation program.hauke2011-04-091-12/+29
| | | | | | | | | Should make it work on big endian systems again, I do not have such a system. This closes #9093. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 boardjuhosg2011-03-131-0/+9
| | | | | | Patch-by: Jonathan Benett <jbscience87@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26118 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:48:03 +0000