summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: rt305x: add kernel support for AirLive AIR3GIIjuhosg2012-12-296-1/+106
| | | | | | | | | | | | | | | | | | | | | | | AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for 3.7juhosg2012-12-2998-0/+9054
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34920 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Build the AP135 imagesjuhosg2012-12-292-0/+13
| | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34919 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add userspace support for AP135juhosg2012-12-294-1/+9
| | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34918 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AP135juhosg2012-12-291-0/+56
| | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34917 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use a backported patch to fix AR933x UART baud rate calculationjuhosg2012-12-291-2/+60
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, ↵nbd2012-12-281-4/+4
| | | | | | slightly improves performance and code size git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel ↵nbd2012-12-286-4/+26
| | | | | | size after lzma and ~12k squashfs size in the default configuration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34909 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashesnbd2012-12-272-236/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: bcma: correct M25P32 serial flash IDhauke2012-12-271-0/+11
| | | | | | | Thank you Rafał Miłecki. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc83xx: add support for 3.7juhosg2012-12-2611-0/+4544
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc83xx: nuke 3.3 supportjuhosg2012-12-2611-4548/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34891 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc83xx: switch to 3.6.11juhosg2012-12-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34890 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc83xx: add support for 3.6juhosg2012-12-2611-0/+4535
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34889 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc83xx: create package for the rbppc_cf modulejuhosg2012-12-261-0/+25
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34888 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: more missing symbols for 3.{6,7}juhosg2012-12-262-0/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34887 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for the AP136-020juhosg2012-12-261-1/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34886 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for AP136-020juhosg2012-12-264-1/+13
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34885 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the AP136-020 boardjuhosg2012-12-262-17/+52
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename AP136 to AP136-010juhosg2012-12-267-9/+24
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: dynamically set AR8327's PAD configuration on AP136juhosg2012-12-251-42/+40
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add sgmii_delay_en field to ar8327_platform_datajuhosg2012-12-253-0/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: show PHY interface mode in dmesgjuhosg2012-12-251-2/+24
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix ASUS WL-330N3G MAC addressjuhosg2012-12-241-3/+3
| | | | | | | | | | | | | | | The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix wifi EEPROM extraction on DIR-615-Dx modelsjuhosg2012-12-241-2/+2
| | | | | | | | Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: add nol2x0 cmdline to disable l2x0 cachekaloz2012-12-232-2/+47
| | | | | | | | | | | | L2 cache via L2X0 cache controller available on some ARM boards can provide a performance boost in some situations but decrease performance in others. This adds a kernel cmdline to disable L2X0 for cns3xxx based boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34874 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: don't use 0 as default VID on AR8327juhosg2012-12-221-1/+3
| | | | | | | | VID0 is reserved for priority-tagged packets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34862 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: more missing symbols for 3.{6,7}juhosg2012-12-222-0/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: unify eeprom file name for the built-in wireless MACjuhosg2012-12-224-6/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34860 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt3883: fix build errorjuhosg2012-12-221-1/+1
| | | | | | | | The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34859 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: register the second ethernet interface on the AP136juhosg2012-12-222-5/+27
| | | | | | | | | Also fix the default network configuration according to the new setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34854 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet device registration for QCA9558juhosg2012-12-222-5/+85
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34853 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename QCA9558 ETH_CFG bit definesjuhosg2012-12-222-4/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fixup allowed PHY interface types for QCA9558juhosg2012-12-221-2/+23
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't assign any MII bus device on QCA9558 by defaultjuhosg2012-12-221-1/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34850 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix mii_bus_dev sanity checkjuhosg2012-12-221-1/+1
| | | | | | | | | | The mii_bus device is not required if phy_mask is zero. The driver will use a fixed connection if it is not specified. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34849 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_devjuhosg2012-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trying to do that causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4 Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000000 00000001 $ 4 : 00000000 802e6390 ffff8f45 00000001 $ 8 : 804b5360 ffffff80 802f93bc 00000000 $12 : 802f93e8 00000000 00000000 00000000 $16 : 8381aba0 8381aba0 00000000 00000000 $20 : 8295eff0 00000032 80000000 004101b8 $24 : 00000000 777265b0 $28 : 82936000 82937cf0 00420000 801d18d4 Hi : 00000000 Lo : 00000001 epc : 801d170c ar7240sw_reset+0x1c/0x19c Tainted: G O ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0 Status: 1100fc03 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button _hotplug(O) Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750) Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000 8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0 8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c 8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c 8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348 ... Call Trace: [<801d170c>] ar7240sw_reset+0x1c/0x19c [<801d18d4>] ag71xx_ar7240_start+0x28/0xc0 [<801cf900>] ag71xx_open+0x1d0/0x258 [<801ec08c>] __dev_open+0xcc/0x130 [<801ec348>] __dev_change_flags+0xc0/0x160 [<801ec490>] dev_change_flags+0x20/0x6c [<801ec5c8>] dev_ifsioc+0xec/0x348 [<801ecdb8>] dev_ioctl+0x594/0x67c [<800ec00c>] do_vfs_ioctl+0x598/0x5ec [<800ec0b0>] sys_ioctl+0x50/0x90 [<8006a3c4>] stack_done+0x20/0x40 Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8316: allow to configure port 6 via platform data on AR8327juhosg2012-12-222-17/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_datajuhosg2012-12-2210-10/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for 3.7juhosg2012-12-2214-0/+785
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: convert to use {e,o}hci-platform driverjuhosg2012-12-228-525/+98
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/3.6: add platform specific power callbacks to {e,o}hci_platform driversjuhosg2012-12-224-0/+305
| | | | | | | | | | | | | Backport of upstream commits: 86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe 04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] ar9 did not load atm driver properlyblogic2012-12-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] dont use input layer for gpio buttonsblogic2012-12-211-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] default switch setup for WBMRblogic2012-12-211-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii ↵blogic2012-12-212-0/+98
| | | | | | | | | | seems to fix the communication issues with the ar8316 switch. (ticket #11143) Tested only on the wbmr-hp-g300h, could affect/break other devices. Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] adds script to set wps info on boards with a wps buttonblogic2012-12-211-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] minor tweaks to WBMR imageblogic2012-12-212-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] add missing PHY_BASIC_FEATURES to 100mbit physblogic2012-12-211-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fix typo inside fritz3370 devicetree fileblogic2012-12-211-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 14:21:49 +0000