summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* build: add config symbols for different ARM arch levelsnbd2013-05-131-0/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move CONFIG_MIPS_SEAD3 to genericjogo2013-05-1216-13/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: don't build CRAMFSjogo2013-05-121-1/+0
| | | | | | | | | | | | Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36616 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] led and buttons support for board DWV-S0jogo2013-05-122-2/+99
| | | | | | | | Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36615 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: remove defconfig supportjogo2013-05-121-18/+0
| | | | | | | | All boards use uci-defaults, no need to keep defconfig support. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36610 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix CVE-2013-1763 in older kernelsjogo2013-05-122-0/+54
| | | | | | | | Newer kernels were already fixed by upstream. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36607 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as ↵nbd2013-05-091-2/+2
| | | | | | | | well, but helps a lot for 34K and 74K) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36600 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: make zlib and lzo modules selectablejogo2013-05-095-0/+115
| | | | | | | | Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36592 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: b53: use correct oops for bcm5365 switchhauke2013-05-091-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36589 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: allow building zsmalloc as a module againjogo2013-05-092-0/+18
| | | | | | | | | | | zsmalloc was changed to a bool because of missing exports in the kernel, but we already export the required symbol, so change it back to tristate. Closes #13481. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36587 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use combined kernel image in the CameoHornet templatejuhosg2013-05-081-6/+5
| | | | | | | | | | This allow us to increase the kernel partition size, and ensures, that the -factory image still usable via the original interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36584 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for the RNX-N360RT boardjuhosg2013-05-082-0/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36582 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space model detection for the RNX-N360RT boardjuhosg2013-05-081-1/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36581 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for Netgear WNDAP360juhosg2013-05-082-0/+14
| | | | | | | | | | [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for Netgear WNDAP360juhosg2013-05-085-0/+12
| | | | | | | | | | [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for Netgear WNDAP360juhosg2013-05-083-0/+150
| | | | | | | | | | | | Here is corrected version (only thing not working are wifi LEDs). [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36578 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.9 to 3.9.1juhosg2013-05-083-3/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36577 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.8 to 3.8.12juhosg2013-05-0834-176/+114
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36576 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix AP135 partition layoutjuhosg2013-05-081-2/+2
| | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: enable portmaps again and set max port to 2blogic2013-05-071-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36573 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: drop 3.7 supportblogic2013-05-07159-40087/+0
| | | | | | Signed-off-by; John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: properly setup the FEATURES variableblogic2013-05-072-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix memory detection rt5350blogic2013-05-061-1/+1
| | | | | | Signed-off-by: Felix Kaechele <felix@fetzig.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable dsp extensions for rt305x and rt3883blogic2013-05-062-2/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix fypo in ethernet driver rt288x, rt3883blogic2013-05-061-24/+44
| | | | | | Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Update ARC Freestation profileblogic2013-05-063-4/+45
| | | | | | | | | | | | | | | | | | | | | | | | These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support setting active_low in devicetree gpio-exportblogic2013-05-061-26/+63
| | | | | | | | Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36563 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: unbreak uart pinmux handlingblogic2013-05-061-8/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix gpio base numberingblogic2013-05-061-16/+32
| | | | | | | | make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36561 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add gpio base properties to dtsi filesblogic2013-05-066-0/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: unbreak rt2880 supportblogic2013-05-066-19/+336
| | | | | | Signed-off-by: John Crsipin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix DIR-602D1 flash sizeblogic2013-05-061-1/+1
| | | | | | | | Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36558 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: unbreak gpio handling for uart mux groupblogic2013-05-041-24/+33
| | | | | | | | this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* at91: build .dtb file for the CalAmp LMU500 boardjuhosg2013-05-031-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix AP135 PCIjuhosg2013-05-031-6/+18
| | | | | | | | | AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add an external reset callback for ar913x and use it in ath9k - ↵nbd2013-05-035-5/+36
| | | | | | | | should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is ↵nbd2013-05-024-52/+0
| | | | | | | | used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: split into two subtargets, generic and SMPjogo2013-05-0221-9/+158
| | | | | | | | Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36527 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add SMP support for BCM6362 and BCM6368jogo2013-05-0213-0/+1275
| | | | | | | | BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36526 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: generic: don't strip /proc/irq on SMPjogo2013-05-024-12/+12
| | | | | | | | /proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix hsspi flash registration for BCM6362jogo2013-05-022-3/+5
| | | | | | | | | Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36524 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix/enable livebox minipcijogo2013-05-021-1/+2
| | | | | | Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36523 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: remove static gpio_request() from board setup and include generic ↵jow2013-05-022-5/+3
| | | | | | | | | kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.8 to 3.8.11juhosg2013-05-0131-106/+35
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patchflorian2013-05-011-2/+4
| | | | | | | | | And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: add missing binary operands to BCM6345 ethernet patchflorian2013-05-011-3/+4
| | | | | | | | Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: remove 3.7 kernel supportflorian2013-05-01119-14640/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename WNR2000v3 support patchjuhosg2013-04-301-0/+0
| | | | | | | | | | Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/geos: switch to 3.8.10juhosg2013-04-302-1/+26
| | | | | | | | Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36496 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/3.9: implement pcibios_get_phb_of_node for MIPSjuhosg2013-04-302-0/+88
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36495 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 04:51:15 +0000