summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* [brcm47xx]: ignore the last page on bcma based SoCshauke2012-09-301-0/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: Fix reading sprom from nvram without a prefixhauke2012-09-305-2/+1189
| | | | | | | | | | | The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: improve the check for the memory sizehauke2012-09-301-0/+42
| | | | | | | This will hopefully fix bug #9360 and #9097 in trunk. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] dont explicitly select wireless-tools. rely on the drivers that ↵blogic2012-09-2810-10/+10
| | | | | | need them to have the right dependency git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] add support for adm6996 phyblogic2012-09-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] tapi was not registeredproperly for most arcadyan boardsblogic2012-09-281-0/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add FIQ support for cns3xxxkaloz2012-09-282-1/+430
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Update board support for Gateworks Laguna Product familykaloz2012-09-281-8/+162
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* USB iso mode fixeskaloz2012-09-281-129/+234
| | | | | | | | | | | Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_macjuhosg2012-09-271-2/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: enable CONFIG_USB_EHCI_TT_NEWSCHEDjuhosg2012-09-271-1/+1
| | | | | | | | | | This feature was experimental in old kernels but that flag has been removed in 2.6.36. Additionally, the option is enabled by default since then. See: http://www.spinics.net/lists/linux-usb/msg31993.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add memory detection code for RT5350juhosg2012-09-272-1/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: allow to use custom code for memory size detectionjuhosg2012-09-272-6/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uml] include sys/resource.h in arch/um/os-Linux/start_up.c (#12155)florian2012-09-271-0/+10
| | | | | | Required for recent (e)glibc systems git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: fix ncores for single-core systems.kaloz2012-09-271-0/+109
| | | | | | | | | | | For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS shows which ones are active. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: add i2c retrieskaloz2012-09-271-0/+72
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: fix pcie abort handlingkaloz2012-09-271-0/+128
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove kmod-spi-bitbangflorian2012-09-262-2/+2
| | | | | | This is no longer a dependency of kmod-spi-bcm63xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add upstream commit id to codel patches and refresh thosejuhosg2012-09-268-34/+37
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] backport the upstream entropy changes (#11951)florian2012-09-263-8/+1334
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [targets] get rid of the IRQF_SAMPLE_RANDOM flagflorian2012-09-264-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add wmbus-repeater to the dLAN USB Extender profileflorian2012-09-251-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] enable multicast and advanced ip routers configsflorian2012-09-251-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profileflorian2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make uci-defaults switch detection work on rt5350blogic2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] add ethernet support for rt5350blogic2012-09-252-18/+106
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make ramips ethernet use a register mapping tableblogic2012-09-251-29/+79
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: activate failsafe on all ports of the switch and not just port 0.hauke2012-09-251-1/+1
| | | | | | | | | | | | Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boardsjuhosg2012-09-253-3/+198
| | | | | | | | | | | | | With these images, it is possible to use the 'unused' partition of the flash. The 'fat' images can be installed with the sysupgrade command. When a 'fat' image is installed from a regular one, the platform specific sysupgrade script copies the calibration data to the end of the flash. Likewise, when a regular image is installed from the 'fat' version the sysupgrade script copies the calibration data back to the original location. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: automatically find WLAN calibration data on TEW-673GRUjuhosg2012-09-251-18/+46
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: automatically find WLAN calibration data on DIR-825-B1juhosg2012-09-251-17/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing backslash to uci-defaults/leds (closes #12240)juhosg2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] unbreak port mapping detectionblogic2012-09-251-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use different machtype and setup for the TL-MR3040juhosg2012-09-247-16/+63
| | | | | | Should fix #12211. Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: avoid using grub prepare when using grub2nbd2012-09-231-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86-generic: enable a few more common kernel options/driversnbd2012-09-221-4/+70
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: increase log buffer sizenbd2012-09-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: enable usb storage support for the generic subtarget to support booting ↵nbd2012-09-221-0/+10
| | | | | | from usb devices git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: add support for building grub2 imagesnbd2012-09-224-3/+56
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: split generic image building into a separate scriptnbd2012-09-222-36/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: rename gen_image_x86.sh to gen_image_grub.shnbd2012-09-222-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: fix ethernet driver tx completion and queue stop/startnbd2012-09-221-0/+110
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: implement ethernet fraglist tx support for improved bridging ↵nbd2012-09-221-18/+191
| | | | | | performance with jumbo frames git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: move gpio stuff into the right filekaloz2012-09-212-111/+111
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.3]: refresh patcheskaloz2012-09-212-9/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: add a small optimization for rx offloadnbd2012-09-211-0/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: fix ethernet port lookup for multi-descriptor jumbo framesnbd2012-09-211-14/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: fix ethernet packet alignment issues (hw has an alignment ↵nbd2012-09-201-14/+18
| | | | | | requirement of 64), fix skb fragment chaining git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: enable perf events when enabling profiling, fixes oprofile on armnbd2012-09-201-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCshauke2012-09-201-0/+12
| | | | | | | | | | When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73