summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* generic: rtl8366: add rtl8366_smi_write_reg_noack helperjuhosg2012-01-214-6/+28
| | | | | | | | | After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add support for pcie host controller on bcma based SoCs.hauke2012-01-2111-18/+3794
| | | | | | | This also adds minimal support for the BCMA43224 pcie wireless card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: sysupgrade for ESR-9753juhosg2012-01-201-0/+1
| | | | | | | | This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix OCF for linux 3.2jogo2012-01-198-10/+19
| | | | | | Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [adm5120] add missing kernel symbolsjow2012-01-192-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Make the grub timeout configurable on x86 targetsjow2012-01-193-1/+11
| | | | | | Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/config-3.2: add linux-3.2 symbols for x86jow2012-01-192-0/+3
| | | | | | | | The following symbols are missing for x86, in sorted order. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix thinko in 102-ehci_hcd_ignore_oc patchflorian2012-01-184-8/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] gigaset 76xblogic2012-01-172-21/+17
| | | | | | | | | | | * fixes leds * adds all leds found on the sx763 board * removes board_config from flash layout because wireless data is stored in kernel (ath5k) * fix button handling Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Rework ramips_eth to not require irqsave locking anymoreblogic2012-01-171-6/+9
| | | | | | | | | | | | | | | | | Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add support for kernel 3.2hauke2012-01-1547-0/+7484
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: run kernel_oldconfighauke2012-01-151-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [target/omap4]: add support for OMAP4 based boards, starting with the PandaBoardkaloz2012-01-148-0/+658
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.2]: fixup arm xz support with recent changeskaloz2012-01-141-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.2]: add missing symbolskaloz2012-01-141-1/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable bridge igmp snooping in 3.2 as wellnbd2012-01-141-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable bridge igmp snooping by default to avoid multicast issuesnbd2012-01-146-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: ppc40x: ppc44x: add missing kernel config symboljogo2012-01-143-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update usb driverhauke2012-01-132-99/+113
| | | | | | | | | | | | | | | | | | Add workarround for BCM5357 and BCM4749. This patch contains the following fixes from George Kashperko: * separate subroutines for controller initialization workarounds - following CodingStyle recommendations; * __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG; * fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being kmalloc'ed is never freed anywhere while platform_device_add_resources will kmemdup resources right away; * fix compilation error in ssb_hcd_resume - it will fail as soon as CONFIG_PM is selected. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic] rtl8366: fix rtl8366_smi_detect() after r29677jow2012-01-131-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: add support for linux 3.2jogo2012-01-1339-0/+5195
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add support for linux 3.2.1jogo2012-01-13125-0/+66387
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport overlayfs v11 to 3.0 and 2.6.39jogo2012-01-132-1868/+2307
| | | | | | Should fix whiteout issues and missing files when using extroot. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.1 to 3.1.9jogo2012-01-1323-60/+41
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.0 to 3.0.17jogo2012-01-1328-68/+48
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: use vlan configuration for connecting ports (forced to be untagged) ↵nbd2012-01-121-1/+7
| | | | | | | | even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: do not strip vlan tags when running with vlan_enable=0nbd2012-01-121-3/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move irq_to_gpio and gpio_to_irq into gpio.cjuhosg2012-01-112-12/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 ↵cshore2012-01-1113-40/+25
| | | | | | isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable ath79 in order to get rid of Kconfig warningsjuhosg2012-01-111-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: pb44_spi: add shutdown handlerjuhosg2012-01-111-0/+10
| | | | | | This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/removejuhosg2012-01-111-6/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpersjuhosg2012-01-111-8/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar71xx_spi: add shutdown handlerjuhosg2012-01-111-0/+10
| | | | | | This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar71xx_spi: save and restore regs from probe/removejuhosg2012-01-111-17/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar71xx_wdt: add shutdown handlerjuhosg2012-01-111-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesjuhosg2012-01-072-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a profile and build images for the TL-WR2543N/NDjuhosg2012-01-072-0/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add initial support for the TL-WR2543N/ND boardjuhosg2012-01-0710-1/+164
| | | | | | The WLAN LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to specify max read size for m25p80juhosg2012-01-071-0/+112
| | | | | | | | | | | | | | | Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add driver for the RTL8367R/M switchesjuhosg2012-01-078-0/+1955
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rtl8366: preparing for RTL8367 supportjuhosg2012-01-074-9/+17
| | | | | | | | * make clock delay configurable * make read,write commands configurable * use u16 for member and untag fields git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rtl8366_smi: add timeout messagejuhosg2012-01-071-2/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: local mac support on the wndr3700juhosg2012-01-071-2/+13
| | | | | | | | | | | | | | The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: improve MIPS kexec supportjuhosg2012-01-0719-1/+3553
| | | | | | | | | | | | | It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boardsjuhosg2012-01-061-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Redwave RW2458Njuhosg2012-01-0610-0/+143
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix RB-750 network configurationjuhosg2012-01-061-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sections mismatch warnings in the nand driversjuhosg2012-01-052-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix LED configuration on the RB-750juhosg2012-01-051-1/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 13:43:05 +0000