summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* [ep93xx] switch to 2.6.38florian2011-05-116-1/+1590
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] add missing 2.6.38 touchscreen config symbolsflorian2011-05-111-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FCblogic2011-05-0910-44/+791
| | | | | | | | | | | | | | | | | | | | | This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: populate LED3 on the JA76PF boardjuhosg2011-05-081-0/+5
| | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci config for the WLAN LED on the WRT160NLjuhosg2011-05-081-0/+11
| | | | | | Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use phy0tpt trigger for the WLAN LEDsjuhosg2011-05-082-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove superfluous fifo_cfg overridesjuhosg2011-05-081-6/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH] ipv6: restore correct ECN handling on TCP xmitthepeople2011-05-082-0/+50
| | | | | | Thanks Dave Taht git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: make switch register access atomicjuhosg2011-05-081-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix section mismatch warningsjuhosg2011-05-082-2/+2
| | | | | | | | | | | | | | | | | | The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix build error if debugfs is enabledjuhosg2011-05-081-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update patcheshauke2011-05-0714-36/+74
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add debugfs entry for [rt]x_ringjuhosg2011-05-071-0/+92
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add timestamps to ag71xx_bufjuhosg2011-05-072-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use dynamically allocated buffer for napi_statsjuhosg2011-05-071-9/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use debugfs_remove_recursivejuhosg2011-05-072-28/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: override wmac device name for the AR934x SoCsjuhosg2011-05-071-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar7] remove useless patchesflorian2011-05-062-29/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fill maintainer infos for a couple of targetsflorian2011-05-0611-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [malta] update to 2.6.38.2florian2011-05-053-193/+47
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] add missing 2.6.38 symbolsflorian2011-05-051-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: when detecting a ssb pci device without an own sprom write the ↵hauke2011-05-056-50/+38
| | | | | | sprom data from the platform device to the correct pointer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix typo in patchhauke2011-05-052-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add some missing symbols for nand/yaffs targetsacoul2011-05-051-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/generic: port yaffs to 2.6.39acoul2011-05-041-0/+147
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/rb532: use kernel and initramfs tags on image generationacoul2011-05-041-4/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH] geos: remove unneeded modulesjow2011-05-031-2/+2
| | | | | | | The via-sata and gpio-nsc modules are both unneeded on the Geos platform. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uml] update to 2.6.38florian2011-05-028-1/+74
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: remove one of the dma cache patches, it causes a regression in the ↵nbd2011-05-021-67/+0
| | | | | | ethernet driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26802 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add fallback sprom for pci devices without an own sprom.hauke2011-05-0124-72/+976
| | | | | | | | | | | | | | If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu ↵nbd2011-05-012-0/+88
| | | | | | - fixes some issues with ath9k git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26797 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the ar8316 switch driver on the PB92 board and add a matching ↵nbd2011-04-283-8/+37
| | | | | | default network config git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8316: automatically detect whether port4 is used as PHY or as a switch portnbd2011-04-281-32/+61
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26778 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)nbd2011-04-282-25/+63
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: support AR8316 rev 0 devicesnbd2011-04-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26776 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/atheros: add 2.6.38 preliminary support acoul2011-04-2714-0/+6616
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26772 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCKnbd2011-04-261-1/+1
| | | | | | | | | SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed in 2.6.39, so replace it with DEFINE_SPINLOCK(). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/adm5120: update wget2nand scriptacoul2011-04-211-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26748 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: update wget2nand scriptacoul2011-04-211-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add 2.6.38 preliminary support acoul2011-04-2134-0/+1141
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uml: fix the kernel config name overridenbd2011-04-171-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove 2.6.35 patchesnbd2011-04-173-123/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26710 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: remove patches/configs for 2.6.35nbd2011-04-1736-5855/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* au1000: remove patches/configs for 2.6.35nbd2011-04-174-248/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26708 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar7: remove patches/configs for old kernel versionsnbd2011-04-1726-3303/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26707 3c298f89-4303-0410-b956-a3cf2f4a3e73
* adm5120: remove patches/configs for unused kernel versionsnbd2011-04-1762-4726/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26706 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs.nbd2011-04-177-29/+43
| | | | | | | | | | Use offset from struct mtd_part instead of struct mtd_partition for defining the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in struct mtd_partition. Signed-off-by: Jochen Friedrich <jochen@scram.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Remove 2.6.35. It's not used anymore.nbd2011-04-17123-43410/+0
| | | | | | Signed-off-by: Jochen Friedrich <jochen@scram.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26704 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... ↵cshore2011-04-172-0/+108
| | | | | | subdir instead if target.... in trunk branch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: backport an upstream commit to fix gspca compile errors triggered by ↵nbd2011-04-161-0/+70
| | | | | | the buildbot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26698 3c298f89-4303-0410-b956-a3cf2f4a3e73