summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
...
* [lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic2012-02-143-7/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: extract eeprom for the PCIe wlan module on the RT-N56Ujuhosg2012-02-141-4/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt3883: enable PCI on the RT-N56U boardjuhosg2012-02-141-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt3883: add PCI supportjuhosg2012-02-148-1/+548
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt3883: sync 2.6.39 configjuhosg2012-02-141-7/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use SoC specific irq.hjuhosg2012-02-143-3/+36
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fixes irq locking in ethernet driverblogic2012-02-141-0/+71
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fixes gpio_export patchblogic2012-02-141-8/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ltq-dsl] add annex selection support to ltq_dsl packageblogic2012-02-142-5/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsjuhosg2012-02-132-0/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add model detection for TL-WR842N/NDjuhosg2012-02-131-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [malta] update to 3.2florian2012-02-131-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar7] fix titan gpio register sizeflorian2012-02-131-0/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt3883: update package list in the default profilejuhosg2012-02-131-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary support for the Asus RT-N56U boardjuhosg2012-02-1311-0/+174
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: enable MDIO code for RT3883juhosg2012-02-131-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary support for the RT3662/RT3883 SoCsjuhosg2012-02-1340-9/+2286
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [malta] add support for 3.2florian2012-02-131-0/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.hauke2012-02-122-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: activate config bug to show warningshauke2012-02-122-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use GENERIC_{4,8}M image template for WR5123GNjuhosg2012-02-121-5/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: pass MTD partition map to the ALL0256N via cmdlinejuhosg2012-02-121-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: refresh patcheshauke2012-02-128-31/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update usb driver for brcm47xx.hauke2012-02-128-390/+280
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add initial support for 3.2juhosg2012-02-1213-1/+607
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: include 'linux/module.h' in the ramips_spi driverjuhosg2012-02-121-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt288x: remove per-board physmap_flash_data instancesjuhosg2012-02-126-28/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: remove per-board physmap_flash_data instancesjuhosg2012-02-1221-120/+93
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: enable another l2 cache errate on newer kernelskaloz2012-02-121-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: load gpio-polled keys modulejuhosg2012-02-111-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30463 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove yet another CONFIG_MTD_PARTITION ifdefjuhosg2012-02-111-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use gpio-keys-polled instead of gpio-buttonsjuhosg2012-02-1127-138/+159
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.3]: add some missing symbolskaloz2012-02-111-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30460 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add MIPS platform filejuhosg2012-02-112-29/+29
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/2.6.39: refresh patchesjuhosg2012-02-119-10/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.3]: refresh patches to -rc3kaloz2012-02-116-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30456 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add MDIO bus support for RT288Xjuhosg2012-02-112-2/+154
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels ↵kaloz2012-02-1114-0/+0
| | | | | | as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: rename 2.6.39 patches directorykaloz2012-02-1115-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Belkin F5D8235-v2 VLAN setupjuhosg2012-02-111-4/+10
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: make debugging messages configurablejuhosg2012-02-114-4/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: use device pointer in DMA API callsjuhosg2012-02-111-11/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: add netdev pointer to private structurejuhosg2012-02-112-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmitjuhosg2012-02-111-5/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30447 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: unmap rx DMA address in ramips_cleanup_dmajuhosg2012-02-111-1/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30446 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: add rx_dma array to store the DMA address of the rx packetsjuhosg2012-02-112-10/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30445 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: use dma_addr_t for the descriptorsjuhosg2012-02-112-9/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: unmap DMA memory when a packet is receivedjuhosg2012-02-111-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30443 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: add a temporary pktlen variablejuhosg2012-02-111-3/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30442 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: raeth: protect macro parametersjuhosg2012-02-111-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30441 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 02:37:49 +0000