summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
...
* rootfs_split fixesjuhosg2007-07-192-16/+13
* Include kmod-via-rhine by default for rb532florian2007-07-191-0/+1
* Convert the NAND driver to platform_driver, allow tgz image to be built corre...florian2007-07-193-53/+137
* Add wget2nand, this should allow netboot installation directly to nandflorian2007-07-191-0/+65
* Really add the LED driver :)florian2007-07-191-0/+29
* disable ipt_quota on linux 2.4 - iptables user space no longer compiles with itnbd2007-07-191-1/+1
* Put the init flag in the structureflorian2007-07-191-3/+4
* rb532 has pci support and should build tgz images by defaultflorian2007-07-191-1/+1
* Allow the redboot supplied command line to be append (#2089)florian2007-07-191-0/+4
* clean of the rootfs_split patchjuhosg2007-07-1910-128/+288
* Replace hardcoded values with their correct definitionsflorian2007-07-182-2/+2
* Convert the nand driver to a platform_device, should only allow routerboards ...florian2007-07-184-56/+162
* Fix the tgz image buildflorian2007-07-181-0/+2
* The RB1xx profile should only provide tgz image and pci supportflorian2007-07-181-1/+1
* Add a USES_TGZ config.in variable, so that RB1xx profiles can use itflorian2007-07-181-0/+1
* Add an ar7 tnetd7200 fix by DerAgo, thanks !florian2007-07-182-36/+144
* add missing config symbolsnbd2007-07-182-0/+4
* Resync x86_64 kernel config and make uml build ext2 images by defaultflorian2007-07-182-4/+4
* Upgrade uml to 2.6.22.1florian2007-07-181-1/+1
* Load the appropriate MTD driver if we were booted from NOR/NAND only, use the...florian2007-07-182-5/+15
* disable a few things that are not packaged yetnbd2007-07-182-6/+6
* dynamically enable/disable kernel config options for kmod packages based on b...nbd2007-07-183-19/+18
* [adm5120] restore support for Infineon's EASY 5120 boardsjuhosg2007-07-175-20/+94
* Preliminary support to bcm6358florian2007-07-171-9/+19
* bump brcm63xx to 2.6.22.1, tookaloz2007-07-174-20/+20
* Add diagnostic stuff to rb500florian2007-07-171-0/+19
* Upgrade rb500 to .22.1, add the LED driver from #986florian2007-07-174-20/+97
* Add ipt_random moduleflorian2007-07-171-0/+318
* Adm5120 NAPI polling support and fixes by Thomas Langer and Friedrich Beckmannflorian2007-07-172-126/+230
* Fix warningsflorian2007-07-172-6/+7
* better support for handling various jffs2 eraseblock sizesnbd2007-07-161-0/+2
* Remove the bogus pciutils dependencyflorian2007-07-161-1/+0
* fix ipp2pnbd2007-07-162-2/+4
* add kernel_oldconfig targetnbd2007-07-161-1/+1
* ixp4xx/fsg3: Enabled the Winbond W83782D sensor for Freecom FSG-3 temperature...rwhitby2007-07-161-1/+1
* disable __must_check by defaultnbd2007-07-162-2/+2
* Set ixp4xx network config to static 192.168.1.1rwhitby2007-07-161-0/+13
* ixp4xx/NSLU2: Added devio to the NSLU2 profile (required for reflashing the k...rwhitby2007-07-161-1/+1
* ixp4xx-2.6: Removed the network config override file, cause we agreed that ix...rwhitby2007-07-161-11/+0
* ixp4xx-2.6: Remove the inadequate netconfig script (which doesn't work on the...rwhitby2007-07-162-89/+0
* ixp4xx-2.6/config: Removed the disabling of swap so that the generic enabling...rwhitby2007-07-161-1/+0
* [adm5120] fix of the board specific initialization of the GPIO pinsjuhosg2007-07-154-1/+13
* [adm5120] refresh patches for 2.6.22.1 using quiltjuhosg2007-07-1512-81/+81
* [adm5120] lzma-loader improvementsjuhosg2007-07-158-452/+784
* ixp4xx-2.6/config: Removed the PPP config override to allow PPP modules to be...rwhitby2007-07-131-1/+0
* [adm5120] flash driver shows the correct chip size from nowjuhosg2007-07-131-1/+1
* Fix the section mismatch on the serial driver (#2076), thanks Thomas !florian2007-07-131-1/+1
* sync avr32 to 2.6.22.atmel.2kaloz2007-07-132-87/+1419
* fix layer7 for 2.6.21nbd2007-07-121-1/+2
* upgrade AVR32 to 2.6.22.1kaloz2007-07-123-6850/+6965