summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: fix GMAC1 interface speed on the DB120 boardjuhosg2011-12-151-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix switch port setup for AR934Xjuhosg2011-12-151-11/+41
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934Xjuhosg2011-12-152-4/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: setup switch interface mode on AR934Xjuhosg2011-12-151-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: detect the built-in switch of the AR934X SoCsjuhosg2011-12-151-12/+36
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to attach the internal switch for AR934xjuhosg2011-12-151-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: introduce ar71xx_switch_datajuhosg2011-12-155-8/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build images for TL-WR741N/ND v2juhosg2011-12-151-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71x: use raw squashfs images for TP-Link boardsjuhosg2011-12-151-20/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create a template for using unpadded squashfs imagesjuhosg2011-12-151-1/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: put squash image right after the kernel on TP-Link boardsjuhosg2011-12-151-4/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: tplinkpart: allow to detect JFFS2 as welljuhosg2011-12-151-3/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: check PHY IDs before accessing the switch registersjuhosg2011-12-151-9/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724xjuhosg2011-12-151-13/+25
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: nuke ar7240sw_initjuhosg2011-12-151-6/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix mac addresses on jjPlus devicesjuhosg2011-12-152-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for the Hornet-UB boardjuhosg2011-12-141-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ALFA Network's Hornet-UB boardjuhosg2011-12-149-0/+160
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GPIO function bit defines for AR933Xjuhosg2011-12-141-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Omnima MiniEMBWiFi boardjuhosg2011-12-1411-1/+140
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix gpio count for ar7241/ar7242nbd2011-12-142-2/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: register extra leds behind the wireless mac on wzr-hp-g450hnbd2011-12-143-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: add support for registering extra leds connected to the wmac gpio linesnbd2011-12-141-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: get rid of squashfs-4k imagesjuhosg2011-12-131-11/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: disable 'small sector' erase in m25p80 driverjuhosg2011-12-136-0/+126
| | | | | | | | This fixes the issues with the jffs2 images on various boards. Using JFFS2 on devices with 4KiB erase sectors is not safe: http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move linux/ath9k_platform.h to generic files so that it can be ↵nbd2011-12-131-0/+0
| | | | | | reused from other targets git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix wireless led on wzr-hp-g450hnbd2011-12-131-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable AR9341 support at setup.cjuhosg2011-12-131-0/+6
| | | | | | Patch-by: dyq <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2juhosg2011-12-135-5/+8
| | | | | | | | | | | | | | | | | | | The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add gpios and usb for wzr-hp-g450hnbd2011-12-131-2/+73
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use RedBoot parser on PB44juhosg2011-12-111-0/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] convert to gpiolibblogic2011-12-092-0/+536
| | | | | | Signed-off-by: karlp@tweak.net.au git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WNDR3x00 factory image generationjuhosg2011-12-071-2/+2
| | | | | | | | | | | | | | | | | Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs for the device: field in their DNI tags, not WNDR3700. This regressed in r29434, which redid WNDR3x00 model detection. The sixth parameter to Image/Build/Netgear is only used as the -B argument to mkdniimg, which is used to set the device: field. In r29434, this was erroneously changed to be WNDR3700 for all models. The tools to flash factory images (U-Boot's TFTP server and the factory software's upgrade utility) may refuse to honor images with incorrect device: fields in their DNI tags. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WNDR3x00 model detectionjuhosg2011-12-071-14/+17
| | | | | | | | | | | | | | | | | | | | Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix mac addresses on the DIR-300/600 boardsjuhosg2011-12-062-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: update 3.1 to 3.1.4jogo2011-12-0610-486/+248
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: update 3.0 to 3.0.12jogo2011-12-068-8/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create firmware image for the TL-WR740N/ND v4 boardsjuhosg2011-12-061-0/+2
| | | | | | Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfwjuhosg2011-12-061-27/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix TL-MR3x20 profile names in image/Makefilejuhosg2011-12-061-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: cleanup TP-Link profilesjuhosg2011-12-062-211/+96
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-Link board detectionjuhosg2011-12-051-1/+54
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use correct mac on the lan interface on several TP-LINK devicesjuhosg2011-12-053-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to pass negative offset values for ar71xx_init_macjuhosg2011-12-052-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not setjuhosg2011-12-051-2/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: verify hardware id of firmware images on TP-Link boardsjuhosg2011-12-052-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: set mac addresses for the NBG-419Njuhosg2011-12-052-1/+7
| | | | | | Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: set preinit interface mac on the hw550-3g boardjuhosg2011-12-051-0/+4
| | | | | | Based on a patch by Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use ramips_get_mac_* functions in the preinit scriptjuhosg2011-12-051-18/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move ramips_get_mac_* functions to lib/ramips.shjuhosg2011-12-052-33/+37
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 03:44:21 +0000