summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
* ramips: rt288x: don't register the PCI controller on each boardjuhosg2012-02-163-3/+8
* ramips: raeth: separate ring allocation and setupjuhosg2012-02-161-44/+90
* generic: add SND_PPC symboljuhosg2012-02-163-0/+3
* [ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include ...cshore2012-02-161-0/+11
* [ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory i...cshore2012-02-162-0/+19
* [ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is biggercshore2012-02-161-4/+4
* [ar71xx] image: For Cameo-based board fix adding mtd layout to kernel command...cshore2012-02-161-1/+1
* linux 3.2: missing generic symbolsjow2012-02-151-0/+2
* ramips: rt288x: fix PCI resource conflictjuhosg2012-02-151-0/+8
* [ramips] correct PCI IO/Mem resource swappingflorian2012-02-151-4/+4
* [ramips] add Ralink V11ST-FE board supportflorian2012-02-1511-0/+134
* ramips: raeth: add a helper function for skb allocationjuhosg2012-02-151-6/+16
* ramips: raeth: use netdev_alloc_skbjuhosg2012-02-151-2/+3
* ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor struct...juhosg2012-02-151-2/+2
* ramips: raeth: use 're' instead of 'priv' everywherejuhosg2012-02-151-73/+73
* ramips: raeth: force link down in ramips_phy_stopjuhosg2012-02-151-7/+6
* ramips: raeth: serialize ramips_link_adjust callsjuhosg2012-02-151-0/+8
* ramips: raeth: add PHYLIB supportjuhosg2012-02-155-10/+229
* linux-atm: update solos-pci driver to upstreamblogic2012-02-143-0/+1044
* linux-atm: headroom/padding fixesblogic2012-02-143-0/+249
* [lantiq] generate uboot environment data in targetblogic2012-02-141-0/+32
* [lantiq] fix compile error in previous commitblogic2012-02-141-10/+10
* [lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic2012-02-143-7/+158
* ramips: extract eeprom for the PCIe wlan module on the RT-N56Ujuhosg2012-02-141-4/+12
* ramips: rt3883: enable PCI on the RT-N56U boardjuhosg2012-02-141-0/+16
* ramips: rt3883: add PCI supportjuhosg2012-02-148-1/+548
* ramips: rt3883: sync 2.6.39 configjuhosg2012-02-141-7/+3
* ramips: use SoC specific irq.hjuhosg2012-02-143-3/+36
* [lantiq] fixes irq locking in ethernet driverblogic2012-02-141-0/+71
* [lantiq] fixes gpio_export patchblogic2012-02-141-8/+8
* [ltq-dsl] add annex selection support to ltq_dsl packageblogic2012-02-142-5/+27
* ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsjuhosg2012-02-132-0/+17
* ar71xx: add model detection for TL-WR842N/NDjuhosg2012-02-131-0/+3
* [malta] update to 3.2florian2012-02-131-1/+1
* [ar7] fix titan gpio register sizeflorian2012-02-131-0/+33
* ramips: rt3883: update package list in the default profilejuhosg2012-02-131-1/+1
* ramips: add preliminary support for the Asus RT-N56U boardjuhosg2012-02-1311-0/+174
* ramips: raeth: enable MDIO code for RT3883juhosg2012-02-131-2/+2
* ramips: add preliminary support for the RT3662/RT3883 SoCsjuhosg2012-02-1340-9/+2286
* [malta] add support for 3.2florian2012-02-131-0/+14
* brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.hauke2012-02-122-2/+0
* brcm47xx: activate config bug to show warningshauke2012-02-122-2/+0
* ramips: use GENERIC_{4,8}M image template for WR5123GNjuhosg2012-02-121-5/+2
* ramips: rt305x: pass MTD partition map to the ALL0256N via cmdlinejuhosg2012-02-121-1/+2
* brcm47xx: refresh patcheshauke2012-02-128-31/+20
* brcm47xx: update usb driver for brcm47xx.hauke2012-02-128-390/+280
* ramips: add initial support for 3.2juhosg2012-02-1213-1/+607
* ramips: include 'linux/module.h' in the ramips_spi driverjuhosg2012-02-121-0/+1
* ramips: rt288x: remove per-board physmap_flash_data instancesjuhosg2012-02-126-28/+30
* ramips: rt305x: remove per-board physmap_flash_data instancesjuhosg2012-02-1221-120/+93