summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] net5501: correct net5501 h/w configurationjow2012-02-025-36/+86
| | | | | | | | | | | | | | | | | Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add preliminary support for linux 3.3jogo2012-02-02122-0/+65996
| | | | | | Based on 3.3-rc2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29986 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH] alix2: correct h/w configurationjow2012-02-012-16/+20
| | | | | | | | | | | Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29981 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boardsjuhosg2012-01-313-15/+89
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge DIR-600 A1 and DIR-615 E4 supportjuhosg2012-01-319-390/+25
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29976 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet LEDs on the DIR-600-A1 boardjuhosg2012-01-313-0/+73
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: unify LED names on D-Link boardsjuhosg2012-01-3110-63/+61
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: support for D-LINK DIR-615 rev. E4juhosg2012-01-3115-7/+428
| | | | | | | | | | | | | | | | | | | | This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-MR11Ujuhosg2012-01-3114-7/+272
| | | | | | | | | | | | | | | | | | | Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compress kernel binaries in Image/Prepare stagejuhosg2012-01-311-2/+2
| | | | | | The lzma compressed kernel is used by one of the loaders. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use dynamically allocated partitions in wrt160nl_partjuhosg2012-01-312-5/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: change vlan_config for the ALFA W502U boardjuhosg2012-01-311-1/+1
| | | | | | This change moves the WAN port into a separate VLAN. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29969 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.2 to 3.2.2jogo2012-01-317-23/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29967 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.1 to 3.1.10jogo2012-01-314-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29966 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.0 to 3.0.18jogo2012-01-319-10/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29965 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] build 96348R imagesflorian2012-01-301-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove support for 2.6.39florian2012-01-3040-5202/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29959 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] bump to 3.0.17florian2012-01-301-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29958 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [au1000] add missing config symbolsflorian2012-01-302-0/+10
| | | | | | Thanks KanjiMonster git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29955 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix gpiommc build failure with 3.2florian2012-01-301-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [x86] create a config-3.2 for upcoming changes, rebase config-default to 2.6.39jow2012-01-302-130/+442
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29953 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ep93xx] add default and Sim.One profilesflorian2012-01-292-0/+39
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ep93xx] add 3.2 supportflorian2012-01-295-1/+1528
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29941 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] add another 3.2 framebuffer symbolflorian2012-01-291-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29940 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [au1000] add support for 3.2 kernelflorian2012-01-295-1/+319
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] add support for the Atheros AP113 reference boardflorian2012-01-2814-12/+316
| | | | | | | | | This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] refresh 3.2 patchesflorian2012-01-2812-19/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add fix for cardbus host controllerhauke2012-01-272-0/+44
| | | | | | | These devices have two devices on the bus, the host controller itself and the device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29923 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use 64k block size for WZR-HP-AG300Hjuhosg2012-01-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade image building of atheros boards after r29899juhosg2012-01-271-10/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create the temporary directory before building initramfs imagesjuhosg2012-01-261-1/+1
| | | | | | Thanks to Florian for reporting. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create a profile and build images for Compex WPE72juhosg2012-01-262-0/+17
| | | | | | | | | [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Compex WPE72/WPE72NXjuhosg2012-01-2611-4/+230
| | | | | | | | | | | This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add WPE72 ID to myloader.hjuhosg2012-01-261-0/+1
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsjuhosg2012-01-2611-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵juhosg2012-01-255-4/+7
| | | | | | | | | | | | | | | | | | | | | modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix GPIO polarity for button and switchjuhosg2012-01-252-6/+6
| | | | | | | | | | This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the lzma loader on the Planex boardsjuhosg2012-01-241-3/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImagejuhosg2012-01-241-12/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the AP/Router LED definitons on MZK-W300NHjuhosg2012-01-242-16/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: preset WLAN LED config on MZK-W300NHjuhosg2012-01-241-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove hardcoded MTD layout from planex filesjuhosg2012-01-244-164/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: pass mtdlayout to Planex boards via command linejuhosg2012-01-241-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove an unused header filejuhosg2012-01-241-24/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: generate sysupgrade image for the ALL0256Njuhosg2012-01-241-0/+5
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add user-space support for ALL0256Njuhosg2012-01-246-1/+20
| | | | | | | | This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add kernel support for ALL0256Njuhosg2012-01-245-0/+136
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke fs_all variable in image/Makefilejuhosg2012-01-241-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create interim kernel files in a separate dirjuhosg2012-01-241-66/+68
| | | | | | This reduces the size of the ImageBuilder tarball a lot. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: prebuild all loaders in Image/Prepare stagejuhosg2012-01-241-2/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73