summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* [ubicom32] remove targetflorian2012-11-30292-61353/+0
| | | | | | | | | This target is unused, does not support any off the shelf hardware and has been a maintenance burden for quite some time now. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34430 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [malta] remove Linux 3.3 supportflorian2012-11-292-305/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34426 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar7] use a default kernel command-line to mount squashfs and jffs2florian2012-11-292-0/+6
| | | | | | | | This fixes bug #9055. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34424 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQLjuhosg2012-11-293-0/+554
| | | | | | | | | Patches queued upstream in net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34415 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: switch to 3.6.8juhosg2012-11-291-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34414 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Update Geos to 3.6.8juhosg2012-11-293-1/+412
| | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34411 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)juhosg2012-11-294-0/+2154
| | | | | | | | | Patches about to go into net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34410 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 configjuhosg2012-11-291-0/+1
| | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34409 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add profile and build image for the Asus RT-N13Ujuhosg2012-11-292-0/+26
| | | | | | | Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34407 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add user-space support for the Asus RT-N13Ujuhosg2012-11-296-0/+10
| | | | | | | Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34406 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Routerjuhosg2012-11-296-0/+92
| | | | | | | | | | | | | | | | | | The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* remove common symbols from 3.6 configsjuhosg2012-11-2911-51/+0
| | | | | | | | The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34404 3c298f89-4303-0410-b956-a3cf2f4a3e73
* remove common symbols from 3.3 configsjuhosg2012-11-2937-101/+0
| | | | | | | | The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34403 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.6 to 3.6.8juhosg2012-11-2911-40/+40
| | | | | | | | Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34402 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar7] use physmap-flash part_probe_typesflorian2012-11-278-56/+48
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34398 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Fix typo in 96338GW power LED.florian2012-11-272-2/+2
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34396 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar7] add AudioCodes AC495 SoCflorian2012-11-272-10/+16
| | | | | | | | | Found in the AudioCodes Tulip AC494 ATA. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34395 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] do not call clk_put() on the timer clockflorian2012-11-271-1/+0
| | | | | | | | We don't support disabling the clock, but this is actually what it would do. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34394 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] do not list specific board compatible stringsflorian2012-11-271-2/+0
| | | | | | | | | The general practice is to use the general SoC compatible string in both the DTS and the board specific .c file. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34393 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] remove unused variables from Makefile.bootflorian2012-11-271-2/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34392 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix title of Bcm4705-wl profilehauke2012-11-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34378 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add profile for bcm4705 with wl driverhauke2012-11-251-0/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34336 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: ramips_eth: use Kconfig definition to enable debugjuhosg2012-11-251-1/+1
| | | | | | | | | | The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34332 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add DIR-615 D userspace supportjuhosg2012-11-255-1/+7
| | | | | | | | | | | | | | | Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of ↵hauke2012-11-253-0/+3
| | | | | | the target configs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34330 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: whitespace cleanupshauke2012-11-257-16/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34329 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix cpu clock detection on ASUS WL-520gUhauke2012-11-241-0/+44
| | | | | | | | | | The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34325 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: watchdog: deactivate NOWAYOUT.hauke2012-11-246-28/+34
| | | | | | | | | | In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34324 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update watchdog driverhauke2012-11-2417-103/+1566
| | | | | | | | | This watchdog driver should work with SoC having a PMU. This fixes #11720. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34323 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add a fixup for rt2x00 devices.jogo2012-11-2475-150/+567
| | | | | | | | | This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34322 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Enable LED pin support for ath9k pci fixup.jogo2012-11-2430-46/+146
| | | | | | | | | | Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix spi transfer handlingjogo2012-11-245-3/+619
| | | | | | | | | | * Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34320 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set pad6 cfg for AR8327 on the AP136 boardjuhosg2012-11-232-20/+38
| | | | | | | | | Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34316 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: set delay values for SGMII mode on AR8327juhosg2012-11-231-0/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34315 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: introduce ar8216_mib_op helperjuhosg2012-11-221-26/+9
| | | | | | | | | | | | | The ar8216_mib_{capture,flush} functions are similar. Move the common code into a helper and use that from the original functions. This change also fixes a lockdep warning in ar8216_mib_flush. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34297 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: make it compatible with 3.7juhosg2012-11-213-3/+63
| | | | | | | | | | | | | | | | | | | swconfig does not compile with 3.7 because struct netlink_notify->pid has been renamed to struct netlink_notify->portid and struct genl_info->snd_pid has been renamed to struct genl_info->snd_portid Use the new names and add compatibility patches to 3.3 and 3.6. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34288 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] adds proper package selection for dgn3500blogic2012-11-211-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns21xx: add support for 3.6juhosg2012-11-2019-0/+7822
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34285 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add some missing symbols for 3.7juhosg2012-11-201-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'juhosg2012-11-201-1/+3
| | | | | | | | Also add a WARN_ON to 'ar8216_mib_fetch_port_stat' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: remove an unblanced mutex_unlock calljuhosg2012-11-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following warning: [ 94.080000] [ 94.080000] ===================================== [ 94.080000] [ BUG: bad unlock balance detected! ] [ 94.080000] 3.3.8 #2 Tainted: G O [ 94.080000] ------------------------------------- [ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at: [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] but there are no more locks to release! [ 94.080000] [ 94.080000] other info that might help us debug this: [ 94.080000] 2 locks held by swconfig/1220: [ 94.080000] #0: (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34 [ 94.080000] #1: (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4 [ 94.080000] [ 94.080000] stack backtrace: [ 94.080000] Call Trace: [ 94.080000] [<8028dc58>] dump_stack+0x8/0x34 [ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc [ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8 [ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394 [ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214 [ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8 [ 94.080000] [<80222440>] genl_rcv+0x24/0x34 [ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c [ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0 [ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c [ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270 [ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c [ 94.080000] [<8006ad78>] stack_done+0x20/0x40 [ 94.080000] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add missing locking callsjuhosg2012-11-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following lockdep warning: [ 19.160000] ------------[ cut here ]------------ [ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4() [ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7 crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 19.210000] Call Trace: [ 19.220000] [<8028dc38>] dump_stack+0x8/0x34 [ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4 [ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24 [ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4 [ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0 [ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98 [ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460 [ 19.250000] [<8008a630>] worker_thread+0x22c/0x334 [ 19.260000] [<8008e544>] kthread+0x88/0x90 [ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18 [ 19.270000] [ 19.270000] ---[ end trace 22e9d696adfa6a08 ]--- Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: convert yaffs to use kuid_t and kgid_t on 3.6+juhosg2012-11-206-22/+1162
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34280 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make rb750_nand driver compatible with 3.7juhosg2012-11-204-17/+131
| | | | | | | | | Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make ar934x_nfc driver compatible with 3.7juhosg2012-11-204-14/+59
| | | | | | | | | Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34278 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh rb4xx_nand patchjuhosg2012-11-201-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34277 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove buffer verification reference from rb4xx_nand.cjuhosg2012-11-201-3/+0
| | | | | | | | It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34276 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix GPIO function selection for AR934xjuhosg2012-11-206-14/+222
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34275 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: restore rb4xx kernel partition size to the original valuejuhosg2012-11-201-1/+1
| | | | | | | | | The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34274 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: install lzma compressed elf kernel image from wget2nandjuhosg2012-11-201-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34273 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:35:53 +0000