summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
* [brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697)florian2011-07-132-2/+2
* [generic]: upgrade to 3.0-rc7kaloz2011-07-128-39/+11
* [orion]: upgrade to 3.0-rc6 and optimize for armv5te againkaloz2011-07-112-28/+28
* ar71xx: do not reset the hardware on transmit timeout - this would mess up th...nbd2011-07-091-4/+0
* ag71xx: keep the rx engine stopped while the link is not up, should hopefully...nbd2011-07-091-91/+91
* [cns3xxx/3.0]: use the new upstream l2cache and wdt code, smaller changes, re...kaloz2011-07-089-179/+228
* [generic/3.0]: add mpcore_wdt fixeskaloz2011-07-084-0/+178
* fix generation of falcon images for profilesblogic2011-07-071-0/+16
* adds 2 ASC related patches to lantiqblogic2011-07-076-0/+120
* fix up falcon kernel configblogic2011-07-073-6/+4
* fix i2c-falcon kmod package selectionblogic2011-07-072-8/+0
* replace all references to xway with danubeblogic2011-07-073-3/+3
* fix lantiq image makefile to represent new split between ar9 and danubeblogic2011-07-071-9/+20
* add ar9 specific profileblogic2011-07-078-0/+280
* rename xway profile to danube and remove ar9 specificsblogic2011-07-078-5/+5
* remove ar9 board from xway profilesblogic2011-07-073-23/+0
* remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patchesblogic2011-07-072-15/+2
* [cns3xxx]: refresh patcheskaloz2011-07-072-8/+3
* [cns3xxx]: refresh patcheskaloz2011-07-071-16/+2
* [cns3xxx]: enable smp supportkaloz2011-07-071-0/+5
* [cns3xxx]: make smp code more similar to upstreamkaloz2011-07-071-60/+46
* [generic/3.0]: 3.0 is at rc6 nowkaloz2011-07-071-1/+1
* ar71xx: build image for the AP121 boards with 4M of flashjuhosg2011-07-071-4/+7
* ar71xx: add separate profiles for the AP121 and AP121-MINI boardsjuhosg2011-07-071-0/+22
* [generic/3.0]: add support for and switch to XZ compressed kernels on ARMkaloz2011-07-072-2/+109
* [cns3xxx]: select the right cpukaloz2011-07-071-0/+28
* [kernel] fix building of perf for arm on uclibcflorian2011-07-071-0/+13
* [realview] enable support for perf eventsflorian2011-07-071-0/+5
* [malta] enable perf counter supportflorian2011-07-071-12/+9
* [ar7] base-files: diag.sh: added failsafe led definitioncshore2011-07-071-1/+9
* [lantiq] get ready for 3.0blogic2011-07-0638-0/+39439
* ramips: fix buffalo image generationjuhosg2011-07-061-1/+1
* [ixp4xx]: add 3.0 supportkaloz2011-07-0641-0/+6217
* refresh patcheskaloz2011-07-067-13/+14
* [generic]: fixup mtd refresh and co.kaloz2011-07-065-21/+32
* [generic/3.0]: fix myloader patch, thanks KanjiMonsterkaloz2011-07-061-1/+1
* fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch...blogic2011-07-062-0/+64
* [cns3xxx]: we have an up-to-date mach-type file nowkaloz2011-07-061-10/+0
* [generic/3.0]: replace the cut down machtype with the full one, as we support...kaloz2011-07-061-0/+2991
* [brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif blockflorian2011-07-064-20/+20
* [kernel] refresh 2.6.39 geode patchesflorian2011-07-062-4/+4
* ramips: add diag support for RT-N15 and PWH2004juhosg2011-07-061-6/+12
* ramips: use the 'router' LED for diagnostic on the WHR-G300N boardjuhosg2011-07-061-1/+1
* ramips: create tftp image for the WHR-G300N boardjuhosg2011-07-061-0/+7
* ramips: create factory image for the WHR-G300N boardjuhosg2011-07-061-0/+24
* [brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Im...cshore2011-07-061-1/+1
* [brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless tool...cshore2011-07-061-1/+1
* [generic/3.0]: add some symbolskaloz2011-07-051-0/+2
* [kernel] sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)florian2011-07-056-6/+12
* [target/generic/3.0]: add missing symbolskaloz2011-07-051-0/+3
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:27:45 +0000