summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* cns3xxx: Fix laguna arm11mpcore watchdognbd2012-10-101-1/+1
| | | | | | | | | | | | | | | | | The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33683 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mtd: allow partial block unlocknbd2012-10-101-0/+18
| | | | | | | | | | | | | | | | This allows sysupgrade for devices such as the Gateworks Avila/Cambria product families based on the ixp4xx using the redboot bootloader with combined FIS directory and RedBoot config partitions on larger FLASH devices with larger eraseblocks. This second iteration of this patch addresses previous issues: - whitespace breakage fixed - unlock in all scenarios - simplification and fix logic bug Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: enable OPTIMIZE_FOR_SIZEnbd2012-10-101-0/+1
| | | | | | | | | Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is critical for some small-footprint boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33679 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: add missing reboot handlers (fixes #11577)nbd2012-10-0912-12/+24
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33672 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove the reboot=bios command line parameter (#12193)nbd2012-10-092-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33671 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: remove bcm_tag usage in kerneljogo2012-10-097-12/+12
| | | | | | Fixes #12292. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33670 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix 963281TAN image namesjogo2012-10-081-3/+3
| | | | | | it's a 6328, not a 6348. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: move bcm_tag.h herejogo2012-10-081-70/+0
| | | | | | | Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix entering failsafe through buttonjogo2012-10-081-0/+1
| | | | | | | gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33653 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: add sysupgrade supportnbd2012-10-073-4/+159
| | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/base-files/lib/cns3xxx.sh | 22 ++ target/linux/cns3xxx/base-files/lib/upgrade/platform.sh | 122 ++++++++++++++++ target/linux/cns3xxx/image/Makefile | 19 +- 3 files changed, 159 insertions(+), 4 deletions(-) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: add GW2383 board supportnbd2012-10-071-1/+17
| | | | | | | | | | | Add GPIO/LED support for Gateworks GW2383 Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/300-laguna_support.patch | 18 +++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33649 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: fix gpio access and add gpio IRQ supportnbd2012-10-071-0/+536
| | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch | 536 ++++++++++++++++++++ 1 file changed, 536 insertions(+) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: update Gateworks Avila board supportnbd2012-10-071-27/+387
| | | | | | | | | | | | | | | | | Several new features for newer boards: - add additional UARTs present on some boards - add additional LEDs present on some boards - add HSS audio device codec present on some boards - add support for GSC present on some boards - add per model setup support for newer boards - set FLASH window per-model for boards with larger FLASH Some fixes: - add IRQ mapping for additional PCI devices (USB Host) Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33647 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: patch cleanupnbd2012-10-073-181/+108
| | | | | | | | roll all avila patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: Add HSS audio driver for Avila product familynbd2012-10-071-0/+2085
| | | | | | | | Add ixp4xx HSS audio driver for Avila Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: update Gateworks Cambria board supportnbd2012-10-071-11/+447
| | | | | | | | | | | | | | | | | Several new features for newer boards: - add irq mapping for additional devices - add platform data for i2c bus to SFP modules - add additional UARTs present on some boards - increased R/W delay for expansion bus UARTs - add additional LEDs present on some boards - add GPIO exports and configuration - add ENET switch config present on some boards - add support for GSC present on some boards - added per model setup support for newer boards Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: patch cleanupnbd2012-10-074-250/+145
| | | | | | | | roll all cambria patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ixp4xx: split out new UART I/O to its own patchnbd2012-10-072-121/+122
| | | | | | | | This is being done for general cleanup Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33642 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: rename the iso file to openwrt-x86-generic.isonbd2012-10-071-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33641 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove grub-legacynbd2012-10-074-93/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: add grub2 iso supportnbd2012-10-073-3/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/generic: enable cdrom + iso9660 supportnbd2012-10-071-1/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33638 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for the TL-WR841N/ND v8juhosg2012-10-041-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33623 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: user-space support for TL-WR841N/ND v8juhosg2012-10-045-0/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TL-WR841N/ND v8 boardjuhosg2012-10-043-0/+198
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: bcma: do not initialize deactivated PCIe coreshauke2012-10-042-6/+32
| | | | | | | | | | Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: use memcmp in mem size detection as suggested by blogichauke2012-10-041-7/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [rdc] fix typo in 05_set_ether_mac_rdc preinit script (#11166)florian2012-10-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33618 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add image for ALL0256N-8Mjuhosg2012-10-041-0/+1
| | | | | | | | | | | | The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33614 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [pxa] add Default and Gumstix PXA profilesflorian2012-10-033-1/+47
| | | | | | Gumstix builds a fake flash image for usage in qemu git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33609 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [pxa] advertise jffs2 featureflorian2012-10-031-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33607 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [pxa] remove broken flagflorian2012-10-031-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33606 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [pxa] fix build with latest gpiolib changesflorian2012-10-033-36/+43
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33605 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] more convertions to {read,write}_relaxed I/O accessorsflorian2012-10-033-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: add missing kernel config symbolnbd2012-09-301-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33603 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] refresh patcheshauke2012-09-301-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33602 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: bcma: use fallback sprom if sprom on card was not validhauke2012-09-301-0/+15
| | | | | | | | | Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: bcma: initialize sprom earlierhauke2012-09-303-4/+222
| | | | | | | | | | The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: run make kernel_oldconfighauke2012-09-301-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: ignore the last page on bcma based SoCshauke2012-09-301-0/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: Fix reading sprom from nvram without a prefixhauke2012-09-305-2/+1189
| | | | | | | | | | | The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: improve the check for the memory sizehauke2012-09-301-0/+42
| | | | | | | This will hopefully fix bug #9360 and #9097 in trunk. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] dont explicitly select wireless-tools. rely on the drivers that ↵blogic2012-09-2810-10/+10
| | | | | | need them to have the right dependency git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] add support for adm6996 phyblogic2012-09-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] tapi was not registeredproperly for most arcadyan boardsblogic2012-09-281-0/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add FIQ support for cns3xxxkaloz2012-09-282-1/+430
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Update board support for Gateworks Laguna Product familykaloz2012-09-281-8/+162
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* USB iso mode fixeskaloz2012-09-281-129/+234
| | | | | | | | | | | Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_macjuhosg2012-09-271-2/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: enable CONFIG_USB_EHCI_TT_NEWSCHEDjuhosg2012-09-271-1/+1
| | | | | | | | | | This feature was experimental in old kernels but that flag has been removed in 2.6.36. Additionally, the option is enabled by default since then. See: http://www.spinics.net/lists/linux-usb/msg31993.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73