rtl819xx - Realtek rtl819xx port to OpenWrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ramips: rt288x: don't register the PCI controller on each board	juhosg	2012-02-16	3	-3/+8
*	ramips: raeth: separate ring allocation and setup	juhosg	2012-02-16	1	-44/+90
*	generic: add SND_PPC symbol	juhosg	2012-02-16	3	-0/+3
*	[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include ...	cshore	2012-02-16	1	-0/+11
*	[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory i...	cshore	2012-02-16	2	-0/+19
*	[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger	cshore	2012-02-16	1	-4/+4
*	[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel command...	cshore	2012-02-16	1	-1/+1
*	linux 3.2: missing generic symbols	jow	2012-02-15	1	-0/+2
*	ramips: rt288x: fix PCI resource conflict	juhosg	2012-02-15	1	-0/+8
*	[ramips] correct PCI IO/Mem resource swapping	florian	2012-02-15	1	-4/+4
*	[ramips] add Ralink V11ST-FE board support	florian	2012-02-15	11	-0/+134
*	ramips: raeth: add a helper function for skb allocation	juhosg	2012-02-15	1	-6/+16
*	ramips: raeth: use netdev_alloc_skb	juhosg	2012-02-15	1	-2/+3
*	ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor struct...	juhosg	2012-02-15	1	-2/+2
*	ramips: raeth: use 're' instead of 'priv' everywhere	juhosg	2012-02-15	1	-73/+73
*	ramips: raeth: force link down in ramips_phy_stop	juhosg	2012-02-15	1	-7/+6
*	ramips: raeth: serialize ramips_link_adjust calls	juhosg	2012-02-15	1	-0/+8
*	ramips: raeth: add PHYLIB support	juhosg	2012-02-15	5	-10/+229
*	linux-atm: update solos-pci driver to upstream	blogic	2012-02-14	3	-0/+1044
*	linux-atm: headroom/padding fixes	blogic	2012-02-14	3	-0/+249
*	[lantiq] generate uboot environment data in target	blogic	2012-02-14	1	-0/+32
*	[lantiq] fix compile error in previous commit	blogic	2012-02-14	1	-10/+10
*	[lantiq] Support booting the Speedport W502V using BRN-BOOT.	blogic	2012-02-14	3	-7/+158
*	ramips: extract eeprom for the PCIe wlan module on the RT-N56U	juhosg	2012-02-14	1	-4/+12
*	ramips: rt3883: enable PCI on the RT-N56U board	juhosg	2012-02-14	1	-0/+16
*	ramips: rt3883: add PCI support	juhosg	2012-02-14	8	-1/+548
*	ramips: rt3883: sync 2.6.39 config	juhosg	2012-02-14	1	-7/+3
*	ramips: use SoC specific irq.h	juhosg	2012-02-14	3	-3/+36
*	[lantiq] fixes irq locking in ethernet driver	blogic	2012-02-14	1	-0/+71
*	[lantiq] fixes gpio_export patch	blogic	2012-02-14	1	-8/+8
*	[ltq-dsl] add annex selection support to ltq_dsl package	blogic	2012-02-14	2	-5/+27
*	ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards	juhosg	2012-02-13	2	-0/+17
*	ar71xx: add model detection for TL-WR842N/ND	juhosg	2012-02-13	1	-0/+3
*	[malta] update to 3.2	florian	2012-02-13	1	-1/+1
*	[ar7] fix titan gpio register size	florian	2012-02-13	1	-0/+33
*	ramips: rt3883: update package list in the default profile	juhosg	2012-02-13	1	-1/+1
*	ramips: add preliminary support for the Asus RT-N56U board	juhosg	2012-02-13	11	-0/+174
*	ramips: raeth: enable MDIO code for RT3883	juhosg	2012-02-13	1	-2/+2
*	ramips: add preliminary support for the RT3662/RT3883 SoCs	juhosg	2012-02-13	40	-9/+2286
*	[malta] add support for 3.2	florian	2012-02-13	1	-0/+14
*	brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.	hauke	2012-02-12	2	-2/+0
*	brcm47xx: activate config bug to show warnings	hauke	2012-02-12	2	-2/+0
*	ramips: use GENERIC_{4,8}M image template for WR5123GN	juhosg	2012-02-12	1	-5/+2
*	ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline	juhosg	2012-02-12	1	-1/+2
*	brcm47xx: refresh patches	hauke	2012-02-12	8	-31/+20
*	brcm47xx: update usb driver for brcm47xx.	hauke	2012-02-12	8	-390/+280
*	ramips: add initial support for 3.2	juhosg	2012-02-12	13	-1/+607
*	ramips: include 'linux/module.h' in the ramips_spi driver	juhosg	2012-02-12	1	-0/+1
*	ramips: rt288x: remove per-board physmap_flash_data instances	juhosg	2012-02-12	6	-28/+30
*	ramips: rt305x: remove per-board physmap_flash_data instances	juhosg	2012-02-12	21	-120/+93