summaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* cns3xxx: switch to 3.3 and add broken flagjuhosg2012-05-271-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a few patches for avoiding unnecessary skb reallocations - ↵nbd2012-05-273-0/+59
| | | | | | significantly improves ethernet<->wireless performance with mac80211 based drivers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: build images for DSL-274XB revision F1jogo2012-05-271-0/+3
| | | | | | | | | | | Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add ath9k to atheros wifi profilejogo2012-05-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: enable bcm6328 support and required driversjogo2012-05-271-3/+6
| | | | | | | | | | | BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add support for DSL-274XB rev F1jogo2012-05-278-6/+146
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix port state after network downjogo2012-05-271-0/+28
| | | | | | | | bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add a fixup for ath9k devicesjogo2012-05-2723-63/+1447
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add support for the HSSPI controllerjogo2012-05-2733-55/+1241
| | | | | | | Add support for the HSSPI controller found on bcm6328 and SPI attached flash. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add preliminary support for bcm6328jogo2012-05-2721-18/+1364
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add flash type detectionjogo2012-05-2732-80/+414
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: pad Speedport W303 V images to 4 MiBjogo2012-05-271-1/+1
| | | | | | | Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: add a default switch configuration for DSL-274XBjogo2012-05-271-1/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: setup network config through uci-defaultsjogo2012-05-2711-159/+42
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: move the board name workaround to /lib/brcm63xx.shjogo2012-05-272-8/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: use the exact board id as board identification stringjogo2012-05-272-14/+17
| | | | | | No need to keep the bcm63xx/ at the start or the chipid info at the end. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix a warning in the connmark modulenbd2012-05-241-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.3 to 3.3.7juhosg2012-05-2333-47/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix an insignificant typojuhosg2012-05-232-2/+2
| | | | | | Patch from #11485. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnDjuhosg2012-05-231-0/+2
| | | | | | Patch by Kamil Trzciński <ayufan@osk-net.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-MR3040juhosg2012-05-233-0/+20
| | | | | | | | | Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add byte queue limits support to net/ethernet/ramips_main.cjuhosg2012-05-231-0/+8
| | | | | | | | | | | | | | Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Enable sysupgrade for Sitecom WL-351juhosg2012-05-231-0/+1
| | | | | | | | | Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driverjuhosg2012-05-231-0/+10
| | | | | | Should fix #11513. Tested with the x86/generic squashfs image within a VM. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: allow platforms with rt2x00 to override the mac address without ↵nbd2012-05-204-4/+7
| | | | | | overriding eeprom, fixes bogus wlan mac address on arv4520 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: merge a net-next fq_codel backlog handling fixnbd2012-05-181-0/+133
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* omap24xx: add support for 3.3juhosg2012-05-1825-0/+13517
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: add support for 3.3juhosg2012-05-1817-0/+27541
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/2.6.39: R.I.P.juhosg2012-05-18131-71476/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: sync kernel configjuhosg2012-05-181-12/+22
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: remove 2.6.39 supportjuhosg2012-05-1815-27379/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: switch to 3.1juhosg2012-05-181-1/+1
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove support for old kernelsjuhosg2012-05-1816-1916/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove subtarget specific LINUX_VERSION overridesjuhosg2012-05-1810-11/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/ep80579: switch to 3.3juhosg2012-05-182-0/+12
| | | | | | | Also fix build errors in the ep80579-drivers package. Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix nvram read out on devices with serial flashhauke2012-05-185-31/+36
| | | | | | | detect nvram on Linksys E3200 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: bcma: fix null pointerhauke2012-05-181-0/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: ssb: recognize ARM Cortex M3hauke2012-05-181-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: some fixes for the USB driverhauke2012-05-182-0/+22
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cobalt: remove 2.6.39 specific patchesjuhosg2012-05-181-370/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/olpc: switch to 3.3juhosg2012-05-182-0/+123
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: image: select bootscript images by default for OLPCjuhosg2012-05-181-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407nbd2012-05-171-0/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add some missing config options added by r31756hauke2012-05-171-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: ssb/bcma: update to version from wireless-testing tag ↵hauke2012-05-1726-2412/+4598
| | | | | | master-2012-05-16-2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: remove support for kernel 3.2hauke2012-05-1760-11653/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/thincan: switch to 3.3juhosg2012-05-172-0/+16
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/xen_domu: switch to 3.3juhosg2012-05-172-0/+76
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/kvm_guest: switch to 3.3juhosg2012-05-172-0/+77
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/generic: switch to 3.3juhosg2012-05-172-0/+113
| | | | | | Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73