summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Allow ethernet interface to be taken down and up againjuhosg2010-10-051-0/+4
| | | | | | | | | | Taking the ramips ethernet interface down and up again resulted in the driver not receiving any frames anymore. Fix this by correctly disabling interrupts in the hw on ifdown. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add mdio_cfg configuration for the ethernet driverjuhosg2010-07-152-0/+81
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix bridging in ramips ethernet driverjuhosg2010-07-131-1/+1
| | | | | | | | | | | | | | | | | | | Bridging between the ramips ethernet driver and rt2800pci was somewhat broken. Frames received by the ethernet driver which were passed to the wifi driver for transmission were sometimes corrupted or sent out with huge delays. The reason for this is the missing assignment of skb->tail in the ramips ethernet driver's rx path resulting in skb->tail pointing to skb->data. Since skb->tail is used by mac80211 it writes into skb->data which messes up the frames content. Fix this by using skb_put to correctly set skb->len and skb->tail. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: cleanup mac_address changingjuhosg2010-01-311-19/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19464 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: update register offsetsjuhosg2010-01-311-8/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19463 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: pass sys_clk via platform_datajuhosg2010-01-311-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: add helper functions to {ed,dis}able interruptsjuhosg2010-01-311-6/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19446 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: remove unnecessary typecastsjuhosg2010-01-311-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19445 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: simplify tx_next computationjuhosg2010-01-311-5/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: simplify tx descriptor initializationjuhosg2010-01-311-3/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19443 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: pass 'raeth_priv' struct directly to dma specific functionsjuhosg2010-01-311-39/+35
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19442 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: convert to use netdev_opsjuhosg2010-01-311-6/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19440 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: fix invalid register writesjuhosg2010-01-301-4/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19417 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: move memset call out from the loopjuhosg2010-01-301-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19416 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: header file cleanupjuhosg2010-01-301-144/+146
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19415 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: coding style cleanupjuhosg2010-01-301-54/+66
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19414 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] missing header file changes, and fix mtu valueblogic2009-10-302-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] fixes rx path for eth, spinlock it, increases buffer size, board ↵blogic2009-10-291-28/+23
| | | | | | now survives ping -f git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] hopefully fixes dma issues seen on ethernet driver when under high loadblogic2009-10-291-2/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to ↵juhosg2009-10-262-1/+204
| | | | | | 'drivers/net/ramips_eth.h' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move ramips_eth_platform_data into a separate filejuhosg2009-10-261-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: request_irq prior to dma allocation, and handle the case if it failsjuhosg2009-10-261-2/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18173 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add error handling to ramips_alloc_dmajuhosg2009-10-261-7/+29
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: free allocated skbs in ramips_cleanup_dmajuhosg2009-10-261-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18171 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add ramips_setup_dma helper to the ethernet driverjuhosg2009-10-261-6/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18170 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add ramips_cleanup_dma helperjuhosg2009-10-261-4/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18169 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove unnecessary includes in the ethernet driverjuhosg2009-10-261-6/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18168 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix dma api usage in the ethernet driverjuhosg2009-10-261-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18167 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use resource to pass irq and base address to the ethernet driverjuhosg2009-10-261-2/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add error-path handling to the ramips_eth_plat_probejuhosg2009-10-261-6/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] fixes licensesblogic2009-10-251-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18152 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] clean up dma api of ethernet driverblogic2009-10-251-12/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18150 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] fixes dma bug in eth driver, that was caused under high net load. ↵blogic2009-10-251-2/+3
| | | | | | the dma ring was not initialized on time git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18149 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: nuke net_device stats from the private data of the ethernet driverjuhosg2009-10-251-15/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove unnecessary type-castings in the ethernet driverjuhosg2009-10-251-13/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18146 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: change debug message levels, and add missing LFsjuhosg2009-10-251-4/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18145 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: make ethernet fuctions staticjuhosg2009-10-251-3/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18144 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] fixes dma hangups in ethblogic2009-10-252-13/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18139 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make ethernet a platform deviceblogic2009-10-241-27/+50
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18135 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make default llll/w vlan setup in eswblogic2009-10-241-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18133 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] adds ethernet driver, esw needs to be moved to swconfig, driver is ↵blogic2009-10-232-0/+506
missing rt288x support, not a platform device yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18128 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 17:46:22 +0000