summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files/arch
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: initial board support for MOFI3500-3GNjuhosg2011-04-044-0/+149
| | | | | | | | | | This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: UPF_FIXED_TYPE must be set for the serial portsjuhosg2011-03-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: define GPIO chips separately for each SoCsjuhosg2011-03-277-84/+152
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move GPIO definitions into a separate header filejuhosg2011-03-275-63/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: setup GPIO chip functions on the flyjuhosg2011-03-271-12/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use separate register base for GPIO chipsjuhosg2011-03-271-8/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix dir-300 mtd layoutjuhosg2011-03-271-1/+1
| | | | | | Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable MDIO on the HW550-3G boardjuhosg2011-03-271-1/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add sysupgrade and status LED support for HW550-3Gjuhosg2011-03-271-10/+10
| | | | | | | | | This patch adds sysupgrade and status LED support for the Aztech HW550-3G. Some LED GPIOs were changed for clarity. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial board support for Aztech HW550-3Gjuhosg2011-03-134-0/+149
| | | | | | | | | | | This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register watchdog device on the rt288x boardsjuhosg2011-01-262-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add watchdog device for RT288xjuhosg2011-01-263-0/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register watchdog device on the rt305x boardsjuhosg2011-01-267-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add watchdog device for RT305xjuhosg2011-01-263-0/+34
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: implement clock API for RT288xjuhosg2011-01-267-45/+152
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: implement clock API for RT305Xjuhosg2011-01-267-41/+148
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove extern and __init from function prototypesjuhosg2011-01-267-31/+28
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: handle OTG interrupt on the RT305x SoCjuhosg2010-12-141-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: ramips_esw: convert it to be a platform driverjuhosg2010-12-083-2/+43
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg2010-12-051-43/+43
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Belkin F5D8235 v2 boardjuhosg2010-11-244-0/+149
| | | | | | | | No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg2010-09-274-0/+111
| | | | | | | | | | | The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Sparklan WCR-150GN boardjuhosg2010-08-154-0/+76
| | | | | | | | | | | This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register ethernet device on the RT-N15juhosg2010-07-151-0/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add generic ethernet device for the RT288xjuhosg2010-07-152-0/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add mdio_cfg configuration for the ethernet driverjuhosg2010-07-151-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: protect GPIO register access with a spinlockjuhosg2010-07-131-1/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic2010-05-311-1/+1
| | | | | | | | Signed-off-by: Helmut Schaa git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: merge slab patchjuhosg2010-05-282-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use COMMAND_LINE_SIZE directlyjuhosg2010-05-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg2010-04-225-9/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: annotate device register function prototypes with __initjuhosg2010-03-311-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register wifi device for the RT2880 based boardsjuhosg2010-03-312-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add wifi device for the RT2880 as welljuhosg2010-03-312-0/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register wifi device on the rt305x based boardsjuhosg2010-03-304-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
* The ralink rt305x board has a wireless card that can be used with the ↵blogic2010-03-302-0/+27
| | | | | | rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] Fix the base address of the wireless card. Otherwise it is not ↵blogic2010-03-301-1/+1
| | | | | | possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: pass sys_clk via platform_datajuhosg2010-01-312-1/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register gpio buttons on the Fonera 2.0N boardjuhosg2010-01-302-0/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register gpio buttons on the WHR-G300N boardjuhosg2010-01-302-1/+45
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register gpio buttons on the V22RW-2x2 boardjuhosg2010-01-302-1/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register gpio buttons on the DIR-300 revB boardjuhosg2010-01-302-1/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix wrong base addresses for the RT288xjuhosg2010-01-301-4/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'juhosg2010-01-307-8/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rename dev_gpio_leds.h to dev-gpio-leds.hjuhosg2010-01-307-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: cleanup WZR-AGL300NH board support filejuhosg2010-01-301-33/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register gpio-buttons on the RT-N15 boardjuhosg2010-01-302-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add common gpio-buttons devicejuhosg2010-01-304-1/+93
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register rtl8366s device on the RT-N15 boardjuhosg2010-01-301-2/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: sanitize return value of ramips_gpio_getjuhosg2010-01-301-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 08:42:45 +0000