summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files/arch
Commit message (Expand)AuthorAgeFilesLines
...
* ramips: merge 2.6.39 patchesjuhosg2011-07-031-10/+11
* ramips: specify eeprom file name on RT305Xjuhosg2011-07-031-1/+4
* ramips: specify eeprom file name on RT288Xjuhosg2011-07-031-1/+4
* ramips: use lowercase partiion names on the WCR150GN boardjuhosg2011-07-031-4/+4
* ramips: update partition map for DIR-300-B1juhosg2011-07-031-4/+4
* ramips: consistently use 'firmware' name for sysupgrade partitionsjuhosg2011-07-036-6/+6
* ramips: remove unused include from the common GPIO codejuhosg2011-07-031-1/+0
* ramips: update HW550-3G mtd partitionsjuhosg2011-07-031-8/+4
* ramips: set cp0_perfcount_irq for RT305Xjuhosg2011-07-031-0/+5
* ramips: initial board support for MOFI3500-3GNjuhosg2011-04-044-0/+149
* ramips: UPF_FIXED_TYPE must be set for the serial portsjuhosg2011-03-271-1/+1
* ramips: define GPIO chips separately for each SoCsjuhosg2011-03-277-84/+152
* ramips: move GPIO definitions into a separate header filejuhosg2011-03-275-63/+52
* ramips: setup GPIO chip functions on the flyjuhosg2011-03-271-12/+5
* ramips: use separate register base for GPIO chipsjuhosg2011-03-271-8/+16
* ramips: fix dir-300 mtd layoutjuhosg2011-03-271-1/+1
* ramips: enable MDIO on the HW550-3G boardjuhosg2011-03-271-1/+5
* ramips: add sysupgrade and status LED support for HW550-3Gjuhosg2011-03-271-10/+10
* ramips: initial board support for Aztech HW550-3Gjuhosg2011-03-134-0/+149
* ramips: register watchdog device on the rt288x boardsjuhosg2011-01-262-0/+2
* ramips: add watchdog device for RT288xjuhosg2011-01-263-0/+33
* ramips: register watchdog device on the rt305x boardsjuhosg2011-01-267-0/+7
* ramips: add watchdog device for RT305xjuhosg2011-01-263-0/+34
* ramips: implement clock API for RT288xjuhosg2011-01-267-45/+152
* ramips: implement clock API for RT305Xjuhosg2011-01-267-41/+148
* ramips: remove extern and __init from function prototypesjuhosg2011-01-267-31/+28
* ramips: handle OTG interrupt on the RT305x SoCjuhosg2010-12-141-0/+3
* ramips: ramips_esw: convert it to be a platform driverjuhosg2010-12-083-2/+43
* ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg2010-12-051-43/+43
* ramips: add support for Belkin F5D8235 v2 boardjuhosg2010-11-244-0/+149
* ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg2010-09-274-0/+111
* ramips: add support for Sparklan WCR-150GN boardjuhosg2010-08-154-0/+76
* ramips: register ethernet device on the RT-N15juhosg2010-07-151-0/+8
* ramips: add generic ethernet device for the RT288xjuhosg2010-07-152-0/+44
* ramips: add mdio_cfg configuration for the ethernet driverjuhosg2010-07-151-0/+5
* ramips: protect GPIO register access with a spinlockjuhosg2010-07-131-1/+11
* Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic2010-05-311-1/+1
* ramips: merge slab patchjuhosg2010-05-282-0/+2
* ramips: use COMMAND_LINE_SIZE directlyjuhosg2010-05-281-1/+1
* ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg2010-04-225-9/+9
* ramips: annotate device register function prototypes with __initjuhosg2010-03-311-2/+2
* ramips: register wifi device for the RT2880 based boardsjuhosg2010-03-312-0/+3
* ramips: add wifi device for the RT2880 as welljuhosg2010-03-312-0/+27
* ramips: register wifi device on the rt305x based boardsjuhosg2010-03-304-0/+4
* The ralink rt305x board has a wireless card that can be used with the rt2800p...blogic2010-03-302-0/+27
* [ramips] Fix the base address of the wireless card. Otherwise it is not possi...blogic2010-03-301-1/+1
* ramips_eth: pass sys_clk via platform_datajuhosg2010-01-312-1/+4
* ramips: register gpio buttons on the Fonera 2.0N boardjuhosg2010-01-302-0/+27
* ramips: register gpio buttons on the WHR-G300N boardjuhosg2010-01-302-1/+45
* ramips: register gpio buttons on the V22RW-2x2 boardjuhosg2010-01-302-1/+26
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 21:24:55 +0000