summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files/arch/mips/include
Commit message (Collapse)AuthorAgeFilesLines
* ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GNjuhosg2012-02-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsjuhosg2012-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add kernel support for ALL0256Njuhosg2012-01-241-0/+1
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardjuhosg2011-12-281-0/+1
| | | | | | Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt288x: change base address and window size of flash bank 0juhosg2011-12-281-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the ALFA Networks W502U (R36) boardjuhosg2011-12-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardjuhosg2011-12-271-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial support for Sitecom WL-351 v1 002juhosg2011-12-232-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for the Senao/EnGenius ESR-9753 boardjuhosg2011-12-231-0/+1
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Omnima MiniEMBWiFi boardjuhosg2011-12-141-0/+1
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support for NexAira BC2juhosg2011-10-241-0/+1
| | | | | | | | | The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the ZyXEL NBG-419N boardjuhosg2011-08-221-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: sort RAMIPS_MACH_* definesjuhosg2011-08-221-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: support for wr512-3gn-like routersjuhosg2011-08-191-0/+1
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Argus ATP-52Bjuhosg2011-08-151-0/+1
| | | | | | | | [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: allow to specify port layout for the switch of the RT305x/RT3350juhosg2011-08-151-0/+7
| | | | | | Based on a patch by Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Netcore NW718 boardjuhosg2011-07-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Asus RT-G32 B1 boardjuhosg2011-07-281-0/+1
| | | | | | Based on a patch by: Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add SPI controller driverjuhosg2011-07-281-0/+1
| | | | | | Based on a patch by Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsjuhosg2011-07-281-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: change machine id for DIR-300juhosg2011-07-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial board support for MOFI3500-3GNjuhosg2011-04-041-0/+1
| | | | | | | | | | This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: define GPIO chips separately for each SoCsjuhosg2011-03-274-12/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move GPIO definitions into a separate header filejuhosg2011-03-272-1/+48
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial board support for Aztech HW550-3Gjuhosg2011-03-131-0/+1
| | | | | | | | | | | This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add watchdog device for RT288xjuhosg2011-01-261-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add watchdog device for RT305xjuhosg2011-01-261-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: implement clock API for RT288xjuhosg2011-01-261-5/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: implement clock API for RT305Xjuhosg2011-01-261-5/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove extern and __init from function prototypesjuhosg2011-01-265-21/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: ramips_esw: convert it to be a platform driverjuhosg2010-12-081-0/+18
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Belkin F5D8235 v2 boardjuhosg2010-11-241-0/+1
| | | | | | | | No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg2010-09-271-0/+1
| | | | | | | | | | | The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Sparklan WCR-150GN boardjuhosg2010-08-151-0/+1
| | | | | | | | | | | This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add mdio_cfg configuration for the ethernet driverjuhosg2010-07-151-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic2010-05-311-1/+1
| | | | | | | | Signed-off-by: Helmut Schaa git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] Fix the base address of the wireless card. Otherwise it is not ↵blogic2010-03-301-1/+1
| | | | | | possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips_eth: pass sys_clk via platform_datajuhosg2010-01-311-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix wrong base addresses for the RT288xjuhosg2010-01-301-4/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'juhosg2010-01-301-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rename dev_gpio_leds.h to dev-gpio-leds.hjuhosg2010-01-301-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add common gpio-buttons devicejuhosg2010-01-301-0/+31
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: update mips multi-machine stuffjuhosg2010-01-301-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19400 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen ↵jow2010-01-241-0/+2
| | | | | | <joonas.lahtinen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to ↵juhosg2009-10-261-203/+0
| | | | | | 'drivers/net/ramips_eth.h' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use definitions from rt305x_regs, and nuke the duplicated onesjuhosg2009-10-261-3/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18175 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move ramips_eth_platform_data into a separate filejuhosg2009-10-262-7/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use resource to pass irq and base address to the ethernet driverjuhosg2009-10-261-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] fixes licensesblogic2009-10-251-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18152 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: nuke net_device stats from the private data of the ethernet driverjuhosg2009-10-251-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18147 3c298f89-4303-0410-b956-a3cf2f4a3e73